Storage: ZFS

zfs notes

Native ZFS for Linux on Proxmox 2.0

• 2012-02-25. check  http://zfsonlinux.org/ See the Documentation and Community Resources for more information and help.

I had tried 3 other operating systems including Debian/kFreebsd and for each was able to recover all the zfs file systems from previous installs. Even with disk name changes [bsd uses ad11, linux sdb ] no data was lost. Today I set up zfsonlinux using the following info on 2 prox 2.0 systems

• install these

aptitude install build-essential gawk alien fakeroot zlib1g-dev uuid uuid-dev libssl-dev parted  pve-headers-$(uname -r) 

• get make and install spl

cd /usr/src
git clone https://github.com/zfsonlinux/spl.git
cd spl
./configure
make deb
dpkg -i *.deb
modprobe spl

• get make and install zfs

cd /usr/src
git clone https://github.com/zfsonlinux/zfs.git
cd zfs
./configure
make deb
dpkg -i *.deb

modprobe zfs

if you do not have and zfs pools made then put this to /etc/modules

spl
zfs

reboot to make sure modules load at boot. I found on one system with limited memory [ compared to what was running] that zfs module would not load .

• note , the deb files made above can be used to install zfs on another system.

Creating Pools and Filesystems

use raidz2 or mirror in main data systems.

Create a simple pool named “tank”

• these were extra disks of varying sizes we had around. I cleared the partition tables 1-st.

zpool create  tank   /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf

Create filesystems, and mount points

• for kvm images. note kvm would not start when put directly on a zfs .

kvm did not start on a zfs file system. 

qm start 3016
kvm: -drive file=/data/pve-storage/images/3016/vm-3016-disk-1.raw,if=none,id=drive-virtio0,aio=native,cache=none: could not open disk image /data/pve-storage/images/3016/vm-3016-disk-1.raw: Invalid argument
start failed: command '/usr/bin/kvm -id 3016 -chardev 'socket,id=monitor,path=/var/run/qemu-server/3016.mon,server,nowait' -mon 'chardev=monitor,mode=readline' -vnc unix:/var/run/qemu-server/3016.vnc,x509,password -pidfile /var/run/qemu-server/3016.pid -daemonize -usbdevice tablet -name fbc16-kvm -smp 'sockets=1,cores=2' -nodefaults -boot 'menu=on' -vga cirrus -k en-us -drive 'if=none,id=drive-ide2,media=cdrom,aio=native' -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -drive 'file=/data/pve-storage/images/3016/vm-3016-disk-1.raw,if=none,id=drive-virtio0,aio=native,cache=none' -device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100' -m 1024 -netdev 'type=tap,id=net0,ifname=tap3016i0,script=/var/lib/qemu-server/pve-bridge,vhost=on' -device 'virtio-net-pci,mac=BA:42:BC:AC:D8:4B,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'' failed: exit code 1

so try to make a ext2 see http://zfsonlinux.org/example-zvol.html

zfs create -V 100G tank/fish

# sfdisk did not work , use this:
Try `parted` instead, which will create the partition at offset 16 by default, which `mkfs.ext2` should use without complaint.  For example:

     parted /dev/tank/fish
     (parted) mkpartfs primary ext2 0 -1
     (parted) quit
     .

mkdir -p /mnt/tank/fish-part1
mount /dev/zvol/tank/fish-part1 /mnt/tank/fish-part1

then use /mnt/tank/fish-part1  for images storage in pve .

• for pve backups and templates:

zfs create tank/data
zfs set mountpoint=/data tank/data
zfs create tank/data/pve-storage

results in

df /data/pve-storage
Filesystem    Type    Size  Used Avail Use% Mounted on
tank/data/pve-storage
               zfs    2.7T     0  2.7T   0% /data/pve-storage

Add more space to the pool

zpool add /dev/sdh /dev/sdi

destroy

to start over

zpool destroy zfs-pool

Setting Properties

• Automatically NFS-export all home directories [ I do not know how to use zfs nfs yet , or if it works yet in linux...].

zfs set sharenfs=rw tank/home

• check sharenfs

zfs get sharenfs tank/home
NAME     PROPERTY  VALUE     SOURCE
tank/home  sharenfs  rw        local

• Turn on compression for everything in the pool

zfs set compression=on tank

zfs links and docs

• http://zfsonlinux.org/faq.html

• http://hub.opensolaris.org/bin/download/Community+Group+zfs/docs/zfslast.pdf

and this has some very important information to know before implementing zfs on a production system.

• http://www.solarisinternals.com/wiki/index.php/ZFS_Best_Practices_Guide

check these well written manual pages:

man zfs

man zpool

How to install ZFS-fuse under Proxmox

(Tested with Kernel 2.6.32)

 apt-get install build-essential libaio-dev libattr1-dev libacl1-dev libz-dev libz-dev libfuse-dev libfuse2 scons libssl-dev
 wget -nd http://zfs-fuse.net/releases/0.6.0/zfs-fuse-0.6.0.tar.bz2
 tar jxvf zfs-fuse-0.6.0.tar.bz2
 cd zfs-fuse-0.6.0
 cd src
 scons
 scond install

Fire up ZFS-fuse daemon

 /usr/local/sbin/zfs-fuse

Create Zpool

 zpool create -m /var/lib/vz/images2 /dev/sdb

Create ZFS

 zfs create images2/109

ZFS clone a vm 109 to vm 110

 zfs snapshot images2/109@master
 zfs clone images2/109@master images2/110

Debian GNU/kFreeBSD

As of 2012-02 the squeeze version does not have NFS, so AFAIK can not be used for Proxmox storage. When Debsd has nfs support then I'd use this for storage of iso's and backups to start. In the mean time this works as a samba server..

zfs works much better using Debian/GNU kFreeBSD then fuse.

after installing the system to kvm or hardware:

• add some disks . in KVM i was only able to get ide to work.

• the scsi disks look like:

ls /dev/ad*
/dev/ad10  /dev/ad10s1  /dev/ad10s2  /dev/ad11  /dev/ad12  /dev/ad13

• per http://www.solarisinternals.com/wiki/index.php/ZFS_Best_Practices_Guide - if I read it right - use entire disk not slices for zfs (I assume slices = partitions).

• if the disks have partition tables, then clear them. just not the operating system disk! I used fdisk to clear the tables. This may not be necessary , if it is not then please delete this part.

fdisk /dev/ad11
o
w

then same for ad12 and ad13

• install this

aptitude install zfsutils

• make a pool

zpool create -f  zfs-pool /dev/ad11 /dev/ad12  /dev/ad13

df | grep zfs-pool
zfs-pool       zfs    1.4T   18K  1.4T   1% /zfs-pool

• http://wiki.debian.org/Debian_GNU/kFreeBSD