Linux Container: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
No edit summary
No edit summary
Line 97: Line 97:
For more information read the man page of pct.
For more information read the man page of pct.
  pct restore 101 /var/lib/vz/dump/vzdump-lxc-100-2015_06_22-11_12_40.tar.lzo
  pct restore 101 /var/lib/vz/dump/vzdump-lxc-100-2015_06_22-11_12_40.tar.lzo
=== LXC on ZFS Rpool ===
There is a Bug up to incl. PVE 4.1. If you want to add some LXC on the rpool, you get an Errormessage like this:
<pre>
mount: special device /rpool/ROOT/pve-1/lxc/subvol-100-disk-1 does not exist
mounting container failed
TASK ERROR: command 'mount -o bind /rpool/ROOT/pve-1/lxc/subvol-100-disk-1 /var/lib/lxc/100/rootfs/' failed: exit code 32
</pre>
The nicest way to fix this, is to create an extra dataset for lxc and set the mountpoint manually to the rpool.
<pre>
zfs create rpool/ROOT/pve-1/lxc
mkdir -p /rpool/ROOT/pve-1/lxc
zfs set mountpoint=/rpool/ROOT/pve-1/lxc rpool/ROOT/pve-1/lxc
</pre>
And add some Container is working fine now.


== Migrate container from OpenVZ to Linux container ==
== Migrate container from OpenVZ to Linux container ==

Revision as of 22:02, 6 February 2016

Introduction

A Linux Container is an operating-system-level virtualization environment for running multiple isolated Linux systems on a single Linux control host (Wikipedia LXC). It can be also defined as a lightweight VM but extremely fast and easy to deploy.

There is not much overhead and therefore it's the perfect solution for effective use of resources.

No extra kernel boot is necessary on startup resulting in a super fast boot.

Linux Containers are introduced in Proxmox VE 4.0 and support the Proxmox Storage Model.

System requirements

  • Proxmox VE 4.0 or higher

Features

  • Support of local directories(NOTE:not on ZFS use instead ZFSPoolPlugin), NFS, ZFS, LVM, Ceph and DRBD9 (other will/can follow)
  • manipulate disk size
  • snapshot, rollback, clone, linked clone (all these features need storage support)
  • Kernel namespaces (ipc, uts, mount, pid, network and user)
  • Apparmor profiles
  • Seccomp policies
  • Chroots (using pivot_root)
  • Kernel capabilities
  • CGroups (control groups)
  • Migration
  • Backup and restore
  • Integrated firewall
  • Network support for VLAN, IPv4, IPv6

Supported OS

  • Debian 6, 7, 8
  • CentOS 6
  • Ubuntu 12.04, 14.04, 15.04
  • Archlinux

Other OS are following step by step.

Manage containers

Management can be done either via the web gui, or via command line tools

Get a container template

All templates can be downloaded at the GUI.

DownloadContainer

NOTE: Only the supported OS work

If the containers are not yet visible use the following pve command to update the list.

pveam update

Create container

After you have downloaded a template, you can create a container based on it.

Create CT

A GUI wizard will guide you through the creation process.

It is also possible to create a container with the pct command line tool. More details see manpages

pct create 104 /var/lib/vz/template/cache/debian-8.0-standard_8.0-1_amd64.tar.gz \
 -description LXC -rootfs 4 -hostname pvecontainer01 -memory 1024 -nameserver 8.8.8.8 \
 -net0 name=eth0,hwaddr=52:4A:5E:26:58:D8,ip=192.168.15.147/24,gw=192.168.15.1,bridge=vmbr0 \
 -storage local -password changeme

Start container

There are two possibilities to start a container:

either on the GUI or on the command line

Start Container
pct start 100

Stop container

Stopping a container can be done in a similar way like starting a container.

Stop Container
pct stop 100

Backup container

The backup can be done in three different modes: snapshot, suspend and stopped. This mode options have only an effect if the container is running.

Backup Container

Snapshot mode: this feature depends on the filesystem and so it must support snapshots. If snapshot mode is chosen but it's not supported by the filesystem the backup will be done in suspend mode.

Suspend mode: the container will be frozen during the time the backup is running. NOTE: Container is not running untill backup is done!

Stopped mode: the container will be turned off and restarted after backup.

The command line tool backing up Linux container is vzdump. For more information read vzdump manpage.

vzdump 100 -compress lzo -dumpdir /var/lib/vz/dump/ -mode snapshot -remove 0

Restore container

Restore Container

It is easy and fast to restore a container.

On the GUI it was only possible to restore a container with the same VMID and if there is no VM with this VMID. In Proxmox VE 3+ it can be restored to any available VMID.

If you need to change the VMID or override a VM you can use the command line tool pct.

For more information read the man page of pct.

pct restore 101 /var/lib/vz/dump/vzdump-lxc-100-2015_06_22-11_12_40.tar.lzo

LXC on ZFS Rpool

There is a Bug up to incl. PVE 4.1. If you want to add some LXC on the rpool, you get an Errormessage like this:

mount: special device /rpool/ROOT/pve-1/lxc/subvol-100-disk-1 does not exist
mounting container failed
TASK ERROR: command 'mount -o bind /rpool/ROOT/pve-1/lxc/subvol-100-disk-1 /var/lib/lxc/100/rootfs/' failed: exit code 32

The nicest way to fix this, is to create an extra dataset for lxc and set the mountpoint manually to the rpool.

zfs create rpool/ROOT/pve-1/lxc
mkdir -p /rpool/ROOT/pve-1/lxc
zfs set mountpoint=/rpool/ROOT/pve-1/lxc rpool/ROOT/pve-1/lxc

And add some Container is working fine now.

Migrate container from OpenVZ to Linux container

Follow this howto:

References