Passthrough Physical Disk to Virtual Machine (VM)

By adding the raw physical device to the Virtual machine, you can test installers and other disk repair tools that work with disk controllers like ddrescue, gnu ddrescue, Clonezilla, Ubuntu Rescue Remix.

NOTE: This guide only works for Virtual Machines, not for Container. For that see https://forum.proxmox.com/threads/container-with-physical-disk.42280/#post-203292

As the disk is attached to the physical and virtual host, this will also prevent Virtual Machine live migration. A second side effect is host system IO wait, when running ddrescue, other vm's running on the host can stutter.

Attach Pass Through Disk

Identify Disk

Before adding a physical disk to host make note of vendor, serial so that you'll know which disk to share in /dev/disk/by-id/

lshw on pve host after adding. note use apt-get install lshw if lshw is not already installed.

lshw -class disk -class storage

...
           *-disk
                description: ATA Disk
                product: ST3000DM001-1CH1
                vendor: Seagate
                physical id: 0.0.0
                bus info: scsi@3:0.0.0
                logical name: /dev/sda
                version: CC27
                serial: Z1F41BLC
                size: 2794GiB (3TB)
                configuration: ansiversion=5 sectorsize=4096
...

• device names like /dev/sdc should never be used as those can change. instead use /dev/disk/by-id . check by listing all of that directory then look for the disk added by matching serial number from lshw and the physical disk :

ls -l /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F41BLC
lrwxrwxrwx 1 root root 9 Jan 21 10:10 /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F41BLC -> ../../sda

or try

ls -l /dev/disk/by-id | grep Z1F41BLC

List disk by-id with lsblk

lsblk is installed.

lsblk |awk 'NR==1{print $0" DEVICE-ID(S)"}NR>1{dev=$1;printf $0" ";system("find /dev/disk/by-id -lname \"*"dev"\" -printf \" %p\"");print "";}'|grep -v -E 'part|lvm'

NAME                         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT DEVICE-ID(S)
sda                            8:0    0   7.3T  0 disk   /dev/disk/by-id/wwn-0x5000c500c35cd719 /dev/disk/by-id/ata-ST8000DM004-2CX188_ZCT1DNY1
sdb                            8:16   1    29G  0 disk   /dev/disk/by-id/usb-Generic_STORAGE_DEVICE-0:0
sdc                            8:32   0 931.5G  0 disk   /dev/disk/by-id/usb-JMicron_Generic_0123456789ABCDEF-0:0
sdd                            8:48   0   1.8T  0 disk   /dev/disk/by-id/wwn-0x5000c500661eeebd /dev/disk/by-id/ata-ST2000DX001-1CM164_Z1E783H2

make-lsblk-list-devices-by-id

Short List

find /dev/disk/by-id/ -type l|xargs -I{} ls -l {}|grep -v -E '[0-9]$' |sort -k11|cut -d' ' -f9,10,11

/dev/disk/by-id/ata-ST8000DM004-2CX188_ZCT1DNY1 -> ../../sda
/dev/disk/by-id/wwn-0x5000c500c35cd719 -> ../../sda
/dev/disk/by-id/usb-Generic_STORAGE_DEVICE-0:0 -> ../../sdb
/dev/disk/by-id/usb-JMicron_Generic_0123456789ABCDEF-0:0 -> ../../sdc
/dev/disk/by-id/ata-ST2000DX001-1CM164_Z1E783H2 -> ../../sdd
/dev/disk/by-id/wwn-0x5000c500661eeebd -> ../../sdd

Update Configuration

qm set  592  -scsi2 /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F41BLC

update VM 592: -scsi2 /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F41BLC

Check Configuration File

grep Z1F41BLC /etc/pve/qemu-server/592.conf

scsi2: /dev/disk/by-id/ata-ST3000DM001-1CH166_Z1F41BLC,size=2930266584K

Stop and Restart KVM Virtual Machine

You may need to configure the guest operating system now that the disk is available.

Tutorial

Example with screenshots

Disk Recovery Tools

1. Ubuntu Rescue Remix - how to use Ubuntu Rescue Remix and Ddrescue
2. ddrescue
3. gnu ddrescue
4. Clonezilla
5. TestDisk
6. PhotoRec
7. Recuva
8. Foremost
9. Parted Magic
10. SpinRite - Low Cost Commercial - Smartctl tutoral on proxmox planned