Iscsi/nappit: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
Line 161: Line 161:


1- pve storage > add iscsi >  
1- pve storage > add iscsi >  
*ID  zvol-8801 ,  
:ID  zvol-8801 ,  
*Portal  10.2.2.21
:Portal  10.2.2.21
*Target: pick target you made for lxc in comstar above.
:Target: from cli find with:
  iscsiadm -m discovery -t st -p 10.2.2.21:3260
*'''disable/un check use LUNs directly'''
*'''disable/un check use LUNs directly'''


Revision as of 23:23, 11 June 2016

draft

  • nappit is a http interface for setting up zfs and iscsi on a few different operating systems.
  • this page is about setting up napp-it omnios to serve iscsi and nfs for pve to use as storage.
  • per comments on forum omnios is a good choice for iscsi nas.
  • TBD set up high availabilty iscsi.

do not use without checking line by line

operating system install

network mtu 9000

Note use <other command > to know which drv file to edit. see napp-it.pdf
vi /kernel/drv/ixgbe.conf
default_mtu = 9000;

then reboot

check result 

root@sys4:/root#  dladm show-linkprop -p mtu ixgbe0
LINK         PROPERTY        PERM VALUE          DEFAULT        POSSIBLE
ixgbe0       mtu             rw   9000           1500           1500-15500

access web page

Info: First login: admin, no password; delete napp-it.cfg to get defaults

Please do not disable Javascript. For realtime monitoring you need a HTML5 websocket capable browser like a newer Firefox or Google Chrome. Logins are valid for current day on all appliances with the same password. It is suggested to use a secure SAN or management network.

pool and zfs

  • see napp-it pdf. create pool and zfs

ssh keys at pve for iscsi

comstar

iSCSI target service

home > services > Comstar . enable Comstar and ISCSI target service

comstar for kvm

We want to make certain that iscsi is served only on one network. If two paths exists to your storage and this is intentional you must install multipath on every proxmox host otherwise chances are eminent that you will mess-up your storage. Alternative you can create a bond to your storage. If the bond is to provide real HA it must span over two switches and to be able to do this it will require stackable switches.

here ' >' means item to click next .

  1. Create target: comstar> targets >CREATE ISCSI Target
  2. Create target portal group: comstar > target portal groups > create target portal-group . choose IP and name
  3. Connect the target portal group to the target: comstar > target portal groups > add target . choose portal group created above
  4. portal group to ISCSI target Without portal group, ISCSI target are published on every valid IP interface Comstar > Target Portal Groups > add member . select portal group from above.
  • check that only intended interface serves iscsi. from cli run this:
itadm list-target -v

check 'tpg-tags:' . make sure 'default' is not set, else iscsi may be served on every interface. comstar/iscsi can now be used for KVM.

lxc and iscsi notes

DRAFT

Note that the ZFS-over-iSCSI plugin which directly creates ZFS datasets for each guest only supports Qemu at the moment. 2016-05

Backups: If you have one dataset exported via ISCSI (i.e., one "storage" in Proxmox terminology) for each LXC container, you can back those datasets up individually with zfs-send/receive or pve-zsync. otherwise you can only backup individual containers using vzdump.


  • for LXC: Manually create one volume per lxc . had to do same for ceph, check notes to make sure size is not too small.

1-disks > volumes > create volume.

Name: zvol-8801 [change 8801 to vmid? ] ,
size xxG [ over estimate a little to start ].
uncheck thin provisioned.

2-Comstar > Logical Units > create volume LU

select pool .
select type o LU: volume
click submit
look twords bottom of screen,
Choose the volume created in step 1 to create a LUN from.
click create

3-Comstar > Views > 'add view

logical unit GUID : Choose the LUN created above to add a view to.
to target group  : All
and to host group : All
force lun... : auto

Your LUN should now be visible from proxmox for usage as base volume

napp-it list view: 

View for LU : 600144f07a4c2f000000575c98580001 /dev/zvol/rdsk/tank/zvol-8801
 View Number  	 Host group  	 target group  	 LUN Number  	 LU 
  0  	          All  	           All  	 6487        	 600144f07a4c2f000000575c98580001

iscsi setup at pve

http://pve.proxmox.com/wiki/Storage:_ZFS_over_iSCSI

https://forum.proxmox.com/threads/shared-storage-suggestion-for-a-5-node-cluster.26727/page-2#post-134576  :

make this more clear:

My recommendation would be to create two different storages in proxmox,

- one using zfs_over_iscsi for KVM which provides all zfs features like (linked) clones, life snapshots, etc.

- and one using LVM with network backing as explained here: https://pve.proxmox.com/wiki/Storage_Model#LVM_Groups_with_Network_Backing for lxc.


All the above can be done from a single zfs pool.


Manually create a volume and share this volume through an iscsi target.  ?????? where

Using this target for the iscsi plugin to create a shared LUN for proxmox on which you create a lvm storage with network backing.

Use the same zfs pool for configuration of the zfs_over_iscsi storage to use for KVM's.

The zfs_over_iscsi plugin will not overwrite the zvol used for your iscsi target for lvm storage.

In this way you have options to running cluster wide VM's using both kvm and lxc which can be life migrated across the cluster either manually or through HA.

  • make sure multipath is not happening.

From pve check all physical connections at pve to ensure that there is just one target: This is correct set up : 

sys5  ~ # iscsiadm -m discovery -t st -p 10.1.10.41:3260
iscsiadm: No portals found
sys5  ~ # iscsiadm -m discovery -t st -p 10.2.2.41:3260
10.2.2.41:3260,2 iqn.2010-09.org.napp-it:1459891666

We want only the 10G network IP to accept icsi connections

TBD: how to make it so there is not multipath .

iscsi for kvm

  • kvm: per Mir on forum: If disks is running on top of ZFS you get best performance by using cache = nocache (the default).
  • using zfs_over_iscsi for KVM which provides all zfs features like (linked) clones, life snapshots, etc.
  • pve > storage > add zfs over iscsi
ID: iscsi-sys4
Portal: 10.2.2.41
Pool: data
Block Size: 8k [ 8k gives better performance but slightly more space is wasted ]
Target: iqn.2010-09.org.napp-it:1459891666 [ one way to get target name to copy and paste is run the following ].
iscsiadm -m discovery -t st -p 10.2.2.41:3260
Group: leave blank
iSCSI provider: comstar
Thin Provision: Optional but allows to over provision your storage
Write Cache: Enable. [If pools option 'sync' is standard or always it is safe to enable write cache for improved performance]

iscsi for lxc

Pay attention to these to important recommendations:
  1. disable 'use LUNs direcly'
  2. Enable shared use (recommended)

1- pve storage > add iscsi >

ID zvol-8801 ,
Portal 10.2.2.21
Target: from cli find with:
 iscsiadm -m discovery -t st -p 10.2.2.21:3260
  • disable/un check use LUNs directly

2- Using this target for the iscsi plugin to create a shared LUN for proxmox on which you create a lvm storage with network backing.

  • pve > storage > add LVM
  • storage name: iscsi-for-lxc
  • For 'Base Storage', use the drop down menu to select the previously defined iSCSI target. zvol-8801 (iSCSI)
  • For 'Base Volume' select The correct Lun. Picking wrong LUN will cause bad issues.
  • For 'Volume Group Name' give a unique name (this name cannot be changed later). vg-8801
  • Enable shared use (recommended)
  • Click save

kvm notes

If you use thin provisioned Zvols you should choose scsi disks and virtio-scsi controller because comstar (the iscsi daemon in Omnios) supports the scsi unmap command. This means the trim command is honored by comstar and therefore trimmed blocks will be released to the pool from the Zvol.

nfs for backups

  • In Omnios 'ZFS Filesystems' click the NFS on your datasets which has NFS enabled and add the following after 'sharenfs='
note the nfs has to be turned off , then click nfs again and put in the setting

I used this: 

rw=@10.2.2.0/24:@10.1.0.0/16,root=@10.2.2.0/24:10.1.0.0/16

backup from omnios

support

omnios has commercial support and modules. if your company will use napp-it / omnios then consider supporting the project.

links

Retrieved from "https://pve.proxmox.com/mediawiki/index.php?title=Iscsi/nappit&oldid=8687"