Install Proxmox VE on Debian Buster: Difference between revisions
A.lauterer (talk | contribs) (→Optional Steps: add note about installing ifupdown2) |
(use <code> tags over <tt> for better visibility) |
||
| Line 11: | Line 11: | ||
=== Add an /etc/hosts entry for your IP address === | === Add an /etc/hosts entry for your IP address === | ||
Please make sure that your machine's hostname is resolvable via < | Please make sure that your machine's hostname is resolvable via <code>/etc/hosts</code>, <i>i.e.</i> you need an entry in <code>/etc/hosts</code> which assigns an address to its hostname. | ||
Make sure that you have configured one of the following addresses in < | Make sure that you have configured one of the following addresses in <code>/etc/hosts</code> for your hostname: | ||
* 1 IPv4 or | * 1 IPv4 or | ||
* 1 IPv6 or | * 1 IPv6 or | ||
* 1 IPv4 and 1 IPv6 | * 1 IPv4 and 1 IPv6 | ||
'''Note''': This also means removing the address < | '''Note''': This also means removing the address <code>127.0.1.1</code> that might be present as default. | ||
For instance, if your IP address is < | For instance, if your IP address is <code>192.168.15.77</code>, and your hostname <code>prox4m1</code>, then your <code>/etc/hosts</code> file could look like: | ||
<pre> | <pre> | ||
| Line 32: | Line 32: | ||
</pre> | </pre> | ||
You can test if your setup is ok using the < | You can test if your setup is ok using the <code>hostname</code> command: | ||
<pre> | <pre> | ||
hostname --ip-address | hostname --ip-address | ||
| Line 79: | Line 79: | ||
Connect to the admin web interface (<nowiki>https://youripaddress:8006</nowiki>). If you have a fresh install and didn't add any users yet, you should use the root account with your linux root password, and select "PAM Authentication" to log in. | Connect to the admin web interface (<nowiki>https://youripaddress:8006</nowiki>). If you have a fresh install and didn't add any users yet, you should use the root account with your linux root password, and select "PAM Authentication" to log in. | ||
Once logged in, create a < | Once logged in, create a <code>Linux Bridge</code> called <code>vmbr0</code>, and add your first network interface to it. | ||
[[Image:Screen-vmbr0-setup-for-ext6.png|Adapt vmbr0 settings]] | [[Image:Screen-vmbr0-setup-for-ext6.png|Adapt vmbr0 settings]] | ||
| Line 85: | Line 85: | ||
== Troubleshooting == | == Troubleshooting == | ||
=== resolv.conf gets overwritten === | === resolv.conf gets overwritten === | ||
The PVE GUI expects to control DNS management and will no longer take its DNS settings from < | The PVE GUI expects to control DNS management and will no longer take its DNS settings from <code>/etc/network/interfaces</code>. | ||
Any package that auto-generates (overwrites) < | Any package that auto-generates (overwrites) <code>/etc/resolv.conf</code> will cause DNS to fail, | ||
e.g. packages 'resolvconf' for IPv4 and 'rdnssd' for IPv6. | e.g. packages 'resolvconf' for IPv4 and 'rdnssd' for IPv6. | ||
=== ipcc_send_rec[1] failed === | === ipcc_send_rec[1] failed === | ||
If you see | If you see | ||
<pre>ipcc_send_rec[1] failed: Connection refused</pre> | <pre>ipcc_send_rec[1] failed: Connection refused</pre> | ||
then you should review your < | then you should review your <code>/etc/hosts</code> file according to the instructions above. | ||
== Optional Steps == | == Optional Steps == | ||
| Line 102: | Line 102: | ||
=== Optional: Install ifupdown2 === | === Optional: Install ifupdown2 === | ||
With < | With <code>ifupdown2</code> you can apply a new network configuration to the host without rebooting it. | ||
apt install ifupdown2 | apt install ifupdown2 | ||
The old package, < | The old package, <code>ifupdown</code> will be removed. | ||
[[Category: HOWTO]][[Category: Installation]] | [[Category: HOWTO]][[Category: Installation]] | ||
Revision as of 06:43, 1 June 2022
Introduction
The installation of a supported Proxmox VE server should be done via Bare-metal_ISO_Installer. In some cases it makes sense to install Proxmox VE on top of a running Debian Buster 64-bit, especially if you want a custom partition layout.
For this How-To we used the 10.8 Debian Buster netinst ISO[1], but any official Buster installation medium should work.
Install a standard Debian Buster (amd64)
Install a standard Debian Buster, for details see Debian, and configure a static IP. It is recommended to only install the "standard" package selection, and nothing else, as Proxmox VE brings its own packages for qemu, lxc. A desktop environment is not necessary.
Add an /etc/hosts entry for your IP address
Please make sure that your machine's hostname is resolvable via /etc/hosts, i.e. you need an entry in /etc/hosts which assigns an address to its hostname.
Make sure that you have configured one of the following addresses in /etc/hosts for your hostname:
- 1 IPv4 or
- 1 IPv6 or
- 1 IPv4 and 1 IPv6
Note: This also means removing the address 127.0.1.1 that might be present as default.
For instance, if your IP address is 192.168.15.77, and your hostname prox4m1, then your /etc/hosts file could look like:
127.0.0.1 localhost.localdomain localhost 192.168.15.77 prox4m1.proxmox.com prox4m1 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters
You can test if your setup is ok using the hostname command:
hostname --ip-address 192.168.15.77 # should return your IP address here
Install Proxmox VE
Adapt your sources.list
Add the Proxmox VE repository:
echo "deb [arch=amd64] http://download.proxmox.com/debian/pve buster pve-no-subscription" > /etc/apt/sources.list.d/pve-install-repo.list
Add the Proxmox VE repository key:
wget http://download.proxmox.com/debian/proxmox-ve-release-6.x.gpg -O /etc/apt/trusted.gpg.d/proxmox-ve-release-6.x.gpg chmod +r /etc/apt/trusted.gpg.d/proxmox-ve-release-6.x.gpg # optional, if you have a non-default umask
Update your repository and system by running:
apt update && apt full-upgrade
Install Proxmox VE packages
Install the Proxmox VE packages
apt install proxmox-ve postfix open-iscsi
Configure packages which require user input on installation according to your needs (e.g. Samba asking about WINS/DHCP support). If you have a mail server in your network, you should configure postfix as a satellite system, your existing mail server will then be the relay host which will route the emails sent by the Proxmox server to their final recipient.
If you don't know what to enter here, choose local only and leave the system name as is.
Finally, reboot your system, the new Proxmox VE kernel should be automatically selected in the GRUB menu.
Note: If you have a subscription key don't forget to switch to the enterprise repository after installation, see Package repositories.
Recommended: remove the os-prober package
The os-prober package scans all the partitions of your host, including those assigned to guests VMs, to create dual-boot GRUB entries. If you didn't install Proxmox VE as dual boot beside another Operating System, you can safely remove the os-prober package.
apt remove os-prober
Connect to the Proxmox VE web interface
Connect to the admin web interface (https://youripaddress:8006). If you have a fresh install and didn't add any users yet, you should use the root account with your linux root password, and select "PAM Authentication" to log in.
Once logged in, create a Linux Bridge called vmbr0, and add your first network interface to it.
Troubleshooting
resolv.conf gets overwritten
The PVE GUI expects to control DNS management and will no longer take its DNS settings from /etc/network/interfaces.
Any package that auto-generates (overwrites) /etc/resolv.conf will cause DNS to fail,
e.g. packages 'resolvconf' for IPv4 and 'rdnssd' for IPv6.
ipcc_send_rec[1] failed
If you see
ipcc_send_rec[1] failed: Connection refused
then you should review your /etc/hosts file according to the instructions above.
Optional Steps
Optional: Remove the Debian kernel
apt remove linux-image-amd64 'linux-image-4.19*'
Update and check grub2 config by running:
update-grub
Optional: Install ifupdown2
With ifupdown2 you can apply a new network configuration to the host without rebooting it.
apt install ifupdown2
The old package, ifupdown will be removed.