Debugging Installation: Difference between revisions
Jump to navigation
Jump to search
(New page: ==Debugging ProxMox Install on some Mainboards== Boot typing '''debug''' at the boot prompt - this will give you a shell a various places - simple press '''Ctrl-D''' to continue the instal...) |
|||
| Line 20: | Line 20: | ||
1 | 1 | ||
1 | 1 | ||
==Other Cheat Codes== | |||
During the initial boot while installing ProxMox from the CD, for some Mainboards, it might be necessary to use one or more of the following cheat codes: | |||
vga=normal | |||
noapic | |||
noacpi | |||
Revision as of 10:29, 2 February 2010
Debugging ProxMox Install on some Mainboards
Boot typing debug at the boot prompt - this will give you a shell a various places - simple press Ctrl-D to continue the installer. After the installer shows the error, press abort to get a console.
Then check if the HD device is detected and how it is named:
# ls /sys/block/
What is the content of
# cat /sys/block/sd<X>/removable
Maybe it is marked as removable drive?
For Example:
#ls /sys/block hdc ram0 ram10 ram12 ram14 ram2 ram4 ram6 ram8 ram1 ram11 ram13 ram15 ram3 ram5 ram7 ram9 sda sdb
#cat /sys/block/sd[ab]/removable 1 1
Other Cheat Codes
During the initial boot while installing ProxMox from the CD, for some Mainboards, it might be necessary to use one or more of the following cheat codes:
vga=normal noapic noacpi