Hotplug (qemu disk,nic,cpu,memory)
Proxmox support hotplugging of Qemu devices:
- Disks (hotplug/unplug)
- NICs (hotplug/unplug)
- USB devices (hotplug/unplug)
- CPU (hotplug/unplug)
- Memory (hotplug/unplug)
Linux Guests Notes
Kernel Modules Needed
You need to have 2 modules loaded in your Linux guest:
# modprobe acpiphp # modprobe pci_hotplug
CPU and Memory Hotplug
Kernel older than 4.7
You need a recent kernel (> 3.10) and an udev rules file, to auto-enable CPU or memory hot-plugging.
You can add the file:
/lib/udev/rules.d/80-hotplug-cpu-mem.rules
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1" SUBSYSTEM=="memory", ACTION=="add", TEST=="state", ATTR{state}=="offline", ATTR{state}="online"
Kernel older than 5.15
For Linux kernel >= 4.7, you don't need the udev rule for memory hotplug; you only need to add this kernel parameter at boot:
memhp_default_state=online
Kernel 5.15 and newer
For Linux kernel >=5.15 (e.g. Ubuntu 22.04) you only need the UDEV rule for CPU hotplug:
/lib/udev/rules.d/80-hotplug-cpu.rules
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1"
Windows Guests Notes
Disk and NIC hotplug work out of the box for all Windows versions >2003
CPU and memory hotplug work on > 2008 enterprise/datacenter, 2012 > standard
Disk and NIC Hotplug/unplug
By default, hot-plug is already enabled for virtual network devices, virtual disks and virtual USB devices.
Just add/remove your disks, USB devices or NICs as usual.
For disk unplug, verify that your disk is not mounted in your Linux guest or enabled in Windows Disk Management.
CPU Hotplug
- In the VM Options, edit the "Hotplug" Value and activate "CPU Hotplug".
- In the Hardware Section of your VM, specify the maximum number of Sockets/Cores.
- You can now use the "CPU Options" dialog to change the number of vCPUs, while the machine is running.
The maximum of CPUs equals sockets * cores.
Memory Hotplug
Memory hotplug is available since Proxmox VE 3.4.
To enable memory hotplug you need to enable both NUMA (web UI: VM -> Hardware -> CPU) and Memory hotplug (web UI: VM -> Options -> Hotplug).
Then you can use the VMs memory options in the web UI as usual.
Memory Hot Unplug
- Memory unplug currently does not work on Windows (<= win10 currently)
- Memory unplug can be unstable on Linux (<= kernel 4.10 currently)
For Linux memory unplug, you need to have movable zone enabled, in the kernel config (not enabled by default on Debian/Ubuntu):
CONFIG_MOVABLE_NODE=YES
and the "movable_node" boot kernel parameter enabled.
Here are some future kernel patches to improve unplug : http://www.spinics.net/lists/linux-mm/msg125359.html
Update max_mem_regions when hot-plugging more than 64 GiB
For Error: a used vhost backend has no free memory slots left
Kernel sets how many memory DIMMs per vhost it supports, default 64.
You can increase the limit by creating a file /etc/modprobe.d/vhost.conf
.
Containing options vhost max_mem_regions=128 (default is 64, you can try increasing it further if necessary) and then rebooting the Proxmox machine.
echo "options vhost max_mem_regions=128" > /etc/modprobe.d/vhost.conf rmmod vhost_net rmmod vhost modprobe vhost_net cat /sys/module/vhost/parameters/max_mem_regions # 128
Ref Forum link : https://forum.proxmox.com/threads/problem-with-hotplug-and-64gb-ram.73621/page-3#post-600595