BETA NOT FOR PRODUCTION
DRBD® refers to block devices designed as a building block to form high availability (HA) clusters. This is done by mirroring a whole block device via an assigned network. DRBD can be understood as network based raid-1. For detailed information please visit Linbit.
Main features of the integration in Proxmox VE:
- drbd9/drbdmanage; drbd devices on top of LVM
- All VM disks (LVM volumes on the DRBD device) can be replicated in real time on several Proxmox VE nodes via the network.
- Ability to live migrate running machines without downtime in a few seconds WITHOUT the need of SAN (iSCSI, FC, NFS) as the data is already on both nodes.
You need 2 identical Proxmox VE servers (V4.0 or higher) with the following extra hardware:
- Extra NIC (dedicated for DRBD traffic)
- Second disk or raid volume (e.g. /dev/sdb) for DRBD
- Use a hardware raid controller with BBU to eliminate performance issues concerning internal metadata (see Florian´s blog).
- A functional Proxmox VE Cluster (V4.0 or higher)
- Do not use write cache for any virtual drives on top of DRBD as this can cause out of sync blocks. You need to use 'writethrough' instead of the default 'none'. Follow the link for more information: http://forum.proxmox.com/threads/18259-KVM-on-top-of-DRBD-and-out-of-sync-long-term-investigation-results?p=93126
- Consider doing integrity checking periodically to be sure DRBD is consistent
Configure eth1 on both nodes with a fixed private IP address via the web interface and reboot each server.
For better understanding, here is my /etc/network/interfaces file from my first node pve1, after the reboot:
cat /etc/network/interfaces # network interface settings auto lo iface lo inet loopback iface eth0 inet manual auto eth1 iface eth1 inet static address 10.0.15.81 netmask 255.255.255.0 auto vmbr0 iface vmbr0 inet static address 192.168.15.81 netmask 255.255.255.0 gateway 192.168.15.1 bridge_ports eth0 bridge_stp off bridge_fd 0
And from the second node pve2:
# network interface settings auto lo iface lo inet loopback iface eth0 inet manual auto eth1 iface eth1 inet static address 10.0.15.82 netmask 255.255.240.0 auto vmbr0 iface vmbr0 inet static address 192.168.15.82 netmask 255.255.255.0 gateway 192.168.15.1 bridge_ports eth0 bridge_stp off bridge_fd 0
And finally the third node pve3:
# network interface settings auto lo iface lo inet loopback iface eth0 inet manual auto eth1 iface eth1 inet static address 10.0.0.83 netmask 255.255.255.0 auto vmbr0 iface vmbr0 inet static address 192.168.15.83 netmask 255.255.255.0 gateway 192.168.15.1 bridge_ports eth0 bridge_stp off bridge_fd 0
Disk for DRBD
DRBD will search for the LVM Volume Group drbdpool. So you have to create them.
I will use /dev/sdb1 for DRBD. Therefore I need to create this single big partition on /dev/sdb - make sure they exist on all nodes.
To prepare the disk for DRBD just run
NOTE: The logical volumes must have all the same size on each node!
parted /dev/sdb mktable gpt parted /dev/sdb mkpart drbd 1 100% parted /dev/sdb p Model: ATA Samsung SSD 850 (scsi) Disk /dev/sdb: 512GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 1049kB 512GB 512GB drbd root@proxmox:~# vgcreate drbdpool /dev/sdb1 Physical volume "/dev/sdb1" successfully created Volume group "drbdpool" successfully created root@proxmox:~# lvcreate -L 511G -n drbdthinpool -T drbdpool Logical volume "drbdthinpool" created.
Install the DRBD user tools on all nodes :
apt-get install drbdmanage -y
To configure DRBD9 it is only necessary to run the following on node pve1:
drbdmanage init You are going to initalize a new drbdmanage cluster. CAUTION! Note that: * Any previous drbdmanage cluster information may be removed * Any remaining resources managed by a previous drbdmanage installation that still exist on this system will no longer be managed by drbdmanage Confirm: yes/no: yes Failed to find logical volume "drbdpool/.drbdctrl" Logical volume ".drbdctrl" created. initializing activity log NOT initializing bitmap Writing meta data... New drbd meta data block successfully created. empty drbdmanage control volume initialized. Operation completed successfully
Now add all nodes of the cluster to DRBD, with the following command
root@pve1:~# drbdmanage new-node pve2 192.168.15.82 Operation completed successfully Operation completed successfully Executing join command using ssh. IMPORTANT: The output you see comes from pve2 IMPORTANT: Your input is executed on pve2 You are going to join an existing drbdmanage cluster. CAUTION! Note that: * Any previous drbdmanage cluster information may be removed * Any remaining resources managed by a previous drbdmanage installation that still exist on this system will no longer be managed by drbdmanage Confirm: yes/no: yes Logical volume ".drbdctrl" successfully removed Logical volume ".drbdctrl" created. You want me to create a v09 style flexible-size internal meta data block. There appears to be a v09 flexible-size internal meta data block already in place on /dev/drbdpool/.drbdctrl at byte offset 4190208 Do you really want to overwrite the existing meta-data? *** confirmation forced via --force option *** Do you want to proceed? *** confirmation forced via --force option *** NOT initializing bitmap md_offset 4190208 al_offset 4157440 bm_offset 4153344 Found some data ==> This might destroy existing data! <== initializing activity log Writing meta data... New drbd meta data block successfully created. Operation completed successfully root@pve1:~# drbdmanage new-node pve3 192.168.15.83
then add the DRBD to /etc/pve/storage.cfg like this
NOTE: Redundancy <Number> - this number can not be higher than the maximum number of your actual total nodes.
dir: local path /var/lib/vz content rootdir,iso,images,vztmpl maxfiles 0 drbd: drbd1 redundancy 3
Create the first VM on DRBD for testing and live migration
On the GUI you can see the DRBD storage and you can use it for as virtual disk storage.
NOTE: DRBD supports only raw disk format at the moment.
Try to live migrate the VM - as all data is available on both nodes it will take just a few seconds. The overall process might take a bit longer if the VM is under load and if there is a lot of RAM involved. But in any case, the downtime is minimal and you will see no interruption at all.
DRBD can be configured in many different ways and there is a lot of space for optimizations and performance tuning. If you run DRBD in a production environment we highly recommend the DRBD commercial support from the DRBD developers. The company behind DRBD is Linbit.
Recovery from communication failure
- You can enable "data-integrity-alg" for testing purposes and test at least for a week before production use. Don't use in production as this can cause split brain in dual-primary configuration and also it decreases performance.
- It is good idea to run "drbdadm verify" once a week (or at least once a month) when servers under low load.
# /etc/cron.d/drbdadm-verify-weekly # This will have cron invoked a drbd resources verification every Monday at 42 minutes past midnight 42 0 * * 1 root /sbin/drbdadm verify all
- Check man drbd.conf, section "NOTES ON DATA INTEGRITY" for more information.
Now you have a fully redundant storage for your VM´s without using expensive SAN equipment, configured in about 10 to 30 minutes - starting from bare-metal.
- Three servers for a redundant SAN
- Three servers for redundant virtualization hosts