Difference between revisions of "Downloads"
m (Udated link to OVH) |
(Added 1.3) |
||
| Line 1: | Line 1: | ||
| + | =Proxmox Virtual Environment 1.3 (ISO Image)= | ||
| + | |||
| + | Download the ISO image, burn it to CD-ROM and boot your server from CD-ROM. For details see [[Installation]] | ||
| + | |||
| + | * Download via http: [http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/proxmox-ve_1.3-4023.iso Proxmox VE 1.3] | ||
| + | * Download via bittorrent: [http://www.proxmox.com/cms_proxmox/cms/upload/bittorrent/proxmox-ve_1.3-4023.iso.torrent Proxmox VE 1.3] | ||
| + | |||
| + | (MD5SUM is 6ddefdba42121ea24b4e1a3b17d93355) | ||
| + | |||
| + | '''Important note''' | ||
| + | |||
| + | If you run windows KVM guests your operating system will recognize some hardware changes on the first boot and windows shows a new network card in the device manager. (e.g. you need to reassign the fixed IP setup to the new network card. if you have DHCP setup there should be no issues). Under some circumstances reactivation of your windows license can be necessary. | ||
| + | |||
| + | ==Update a running Proxmox Virtual Environment 1.2 to 1.3== | ||
| + | |||
| + | Update your repository and packages: | ||
| + | <pre>apt-get update</pre> | ||
| + | |||
| + | If you get any errors, your sources.list (or your network) has a problem. | ||
| + | Before you update your system, you should stop all your running VM´s. | ||
| + | |||
| + | Now you can install the new software packages (incl. Kernel): | ||
| + | <pre>apt-get dist-upgrade</pre> | ||
| + | |||
| + | Finally reboot and check if you got the latest Proxmox VE packages: | ||
| + | |||
| + | Kernel version: | ||
| + | <pre>uname -a | ||
| + | |||
| + | Expected output: | ||
| + | |||
| + | ... 2.6.24-7-pve #1 SMP PREEMPT Tue Jun 2 08:00:29 CEST 2009 x86_64 GNU/Linux</pre> | ||
| + | |||
| + | PVE Manager version: | ||
| + | <pre>pveversion -v | ||
| + | |||
| + | Expected output: | ||
| + | |||
| + | pve-manager: 1.3-1 (pve-manager/1.3/4023) | ||
| + | qemu-server: 1.0-14 | ||
| + | pve-kernel: 2.6.24-8 | ||
| + | pve-kvm: 86-1 | ||
| + | pve-firmware: 1 | ||
| + | vncterm: 0.9-2 | ||
| + | vzctl: 3.0.23-1pve3 | ||
| + | vzdump: 1.1-2 | ||
| + | vzprocps: 2.0.11-1dso2 | ||
| + | vzquota: 3.0.11-1 | ||
| + | </pre> | ||
| + | |||
| + | |||
=Proxmox Virtual Environment 1.2 (ISO Image)= | =Proxmox Virtual Environment 1.2 (ISO Image)= | ||
Revision as of 08:47, 4 June 2009
Proxmox Virtual Environment 1.3 (ISO Image)
Download the ISO image, burn it to CD-ROM and boot your server from CD-ROM. For details see Installation
- Download via http: Proxmox VE 1.3
- Download via bittorrent: Proxmox VE 1.3
(MD5SUM is 6ddefdba42121ea24b4e1a3b17d93355)
Important note
If you run windows KVM guests your operating system will recognize some hardware changes on the first boot and windows shows a new network card in the device manager. (e.g. you need to reassign the fixed IP setup to the new network card. if you have DHCP setup there should be no issues). Under some circumstances reactivation of your windows license can be necessary.
Update a running Proxmox Virtual Environment 1.2 to 1.3
Update your repository and packages:
apt-get update
If you get any errors, your sources.list (or your network) has a problem. Before you update your system, you should stop all your running VM´s.
Now you can install the new software packages (incl. Kernel):
apt-get dist-upgrade
Finally reboot and check if you got the latest Proxmox VE packages:
Kernel version:
uname -a Expected output: ... 2.6.24-7-pve #1 SMP PREEMPT Tue Jun 2 08:00:29 CEST 2009 x86_64 GNU/Linux
PVE Manager version:
pveversion -v Expected output: pve-manager: 1.3-1 (pve-manager/1.3/4023) qemu-server: 1.0-14 pve-kernel: 2.6.24-8 pve-kvm: 86-1 pve-firmware: 1 vncterm: 0.9-2 vzctl: 3.0.23-1pve3 vzdump: 1.1-2 vzprocps: 2.0.11-1dso2 vzquota: 3.0.11-1
Proxmox Virtual Environment 1.2 (ISO Image)
Download the ISO image, burn it to CD-ROM and boot your server from CD-ROM. For details see Installation
- Download via http: Proxmox VE 1.2
- Download via bittorrent: Proxmox VE 1.2
(MD5SUM is 005e9c0297ff1eb21e37c33c51ba6c7e)
Update a running Proxmox Virtual Environment 1.1 to 1.2
Proxmox VE 1.2 is the first release based on Debian Lenny. Therefore the update is a major distribution upgrade (about 200 mb) and you should take some basic steps:
- make sure you have a working backup of your virtual machines (see Backup - Restore - Live Migration)
- its recommended to stop all running virtual machines before executing the update script
Note: If you got a custom installation (e.g. from your hosting provider like OVH) you should contact your provider for update instructions. For OVH, see these additional update instructions.
To perform the update, please log in via ssh or via console:
wget http://pve.proxmox.com/debian/dists/lenny/pve-upgrade-1.1-to-1.2 chmod +x pve-upgrade-1.1-to-1.2 ./pve-upgrade-1.1-to-1.2
The script updates your system in several steps automatically to Proxmox VE 1.2. If you got any errors, correct them and run the script again.
Optional: after the successful upgrade you can purge all unnecessary package. Only do this if you have not installed any additional packages - else they will get removed. This is just to save space on the harddisk.
./pve-upgrade-1.1-to-1.2 --purge
Finally reboot and check if you got the latest Proxmox VE packages.
Kernel version:
uname -a Expected output: 2.6.24-5-pve #1 SMP PREEMPT Tue May 12 09:01:17 CEST 2009 x86_64 GNU/Linux
PVE Manager version:
pveversion -v Expected output: pve-manager: 1.2-1 (pve-manager/1.2/3982) qemu-server: 1.0-12 pve-kernel: 2.6.24-6 pve-kvm: 85-1 pve-firmware: 1 vncterm: 0.9-2 vzctl: 3.0.23-1pve3 vzdump: 1.1-1 vzprocps: 2.0.11-1dso2 vzquota: 3.0.11-1
This script is tested and working for the standard Proxmox VE 1.1 installation.
Proxmox Virtual Environment 1.1 (ISO Image)
Download the ISO image, burn it to CD-ROM and boot your server from CD-ROM. For details see Installation
- Download via http: Proxmox VE 1.1
- Download via bittorrent: Proxmox VE 1.1
(MD5SUM is 5d2962db353716415fb07067d61f90bc)
Update a running Proxmox Virtual Environment V 1.x to the latest version
These instructions should be used for all standard Proxmox VE 1.x installations.
Note: If you got a custom installation (e.g. from your hosting provider like OVH) you should contact your provider for update instructions.
Update your repository and packages:
apt-get update
If you get any errors, your sources.list (or your network) has a problem. Before you update your system, you should stop all your running VM´s.
Now you can install the new software packages (incl. Kernel):
apt-get dist-upgrade
Finally reboot and check if you got the latest Proxmox VE packages:
Kernel version:
uname -a Expected output: 2.6.24-2-pve #1 SMP PREEMPT Wed Jan 14 11:32:49 CET 2009 x86_64 GNU/Linux
PVE Manager version:
pveversion -v Expected output: pve-manager: 1.1-1 (pve-manager/1.1/3675) qemu-server: 1.0-7 pve-kernel: 2.6.24-5 pve-kvm: 83-1 pve-firmware: 1 vncterm: 0.9-1 vzctl: 3.0.23-1pve1 vzdump: 1.1-1 vzprocps: 2.0.11-1dso2 vzquota: 3.0.11-1dso1
Note: If you start existing Windows KVM VM´s, the Windows OS finds some new hardware pieces and install automatically new driver - and needs a reboot then.
Proxmox Virtual Environment 1.0 (ISO Image)
Download the ISO image, burn it to CD-ROM and boot your server from CD-ROM. For details see Installation
- Download via http: Proxmox VE 1.0
- Download via bittorrent: Proxmox VE 1.0
(MD5SUM is fdd5b603d3e9558f125edfc55dcfb3ef)
Update a running Proxmox Virtual Environment V0.9beta2
These instructions should be used for all standard Proxmox VE 0.9beta2 installations.
Note: If you still run 0.9, please stop all running VM and remove the following package before proceeding.
dpkg -r pve-kvm-2.6.24
Note: If you got a custom installation (e.g. from your hosting provider like OVH) you should contact your provider for update instructions.
Review and correct the sources.list
We changed the repositories so you need to correct your list.
nano /etc/apt/sources.list
deb http://ftp.debian.org/debian etch main # PVE packages provided by proxmox.com deb http://download.proxmox.com/debian etch pve # security updates deb http://security.debian.org/ etch/updates main
Add the Proxmox VE repository key:
wget -O- "http://download.proxmox.com/debian/key.asc" | apt-key add -
Update your repository and install the new packages
apt-get update
If you get any errors, your sources.list (or your network) has a problem.
Before you update your system, you should stop all your running VM´s.
apt-get dist-upgrade
Update the list of Virtual Appliances:
pveam update
We changed the boot loader from lilo to grub, so you need to install grub:
mkdir /boot/grub apt-get install grub
Now you can install the new Kernel:
apt-get install proxmox-ve pve-kernel
Install grub into the MBR to use the new Kernel:
grub-install hd0
Finally reboot and check if you got the latest Proxmox VE packages:
Kernel version:
uname -a Expected output: 2.6.24-1-pve #1 SMP PREEMPT Fri Oct 24 11:34:13 CEST 2008 x86_64 GNU/Linux (or newer)
PVE Manager version:
pveversion -v Expected output: pve-manager: 1.0-2 (pve-manager/1.0/3399) qemu-server: 1.0-1 pve-kernel: 2.6.24-4 pve-kvm: 75-1 pve-firmware: 1 vncterm: 0.9-1 vzctl: 3.0.22-3pve3 vzdump: 1.1-1 vzprocps: 2.0.11-1dso2 vzquota: 3.0.11-1dso1
Configure your Proxmox VE via the Central Web-based Management
- Set the administrator email address
- Download the new Virtual Appliances