FreeBSD Guest Notes: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
No edit summary
(Add note regarding space required for jails and building from source)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:HOWTO]]
[[Category:HOWTO]]
Tweaks and tips for better performance with FreeBSD on KVM.
Setting up a FreeBSD Guest on PVE.
:'''Note:''' This has been tested with FreeBSD 13.1 RELEASE.
 
==Pre-Install==
* Find the downloadable ([https://download.freebsd.org/releases/amd64/amd64/ISO-IMAGES/13.1/ amd64 dvd1.iso version]).
* Mimimum hardware ([https://docs.freebsd.org/en/books/handbook/bsdinstall/#bsdinstall-hardware requirements])
** 2-4GB RAM
** 8 GB drive space
*** Full install without jails will use at least 5GB
*** If you will be using jails and building kernel from source, use at least 35GB
 
==Create Install Media==
* Option 1: (IDEAL) Using Proxmox GUI, local Storage > Download from URL, copy in ([https://download.freebsd.org/releases/amd64/amd64/ISO-IMAGES/13.1/ ISO link]), query it to get file name, and use the contents of the provided ([https://download.freebsd.org/releases/amd64/amd64/ISO-IMAGES/13.1/ CHECKSUM file]) to verify the download
* Option 2: Using Proxmox GUI, local Storage > Upload file from your non-Proxmox machine
* Option 3: (for server without internet) Download ISO image and burn to DVD or save to USB drive then transfer to server


:'''Note:''' This has been tested with FreeBSD 10.3 RELEASE (and patch levels). Some steps have been removed as they have been deprecated in newer FreeBSD versions.
==Create VM==
==Create VM==
* Download the FreeBSD 10.3-RELEASE-amd64 DVD ISO (from [http://www.freebsd.org/where.html here]) and transfer it to your VM server.
* Use "Create VM" in GUI
* Create a new VM:
* In "Create: Virtual Machine" use these settings
** CPU: dual-socket and/or dual-core
** "General" - default settings
** RAM: 2GB (minimum)
** "OS"
** Network: Virtio
*** Set "ISO Image" to your downloaded ISO file
** Disk: 32GB (or higher), virtio, qcow2
** "System" - default settings
** Add FreeBSD 10.3-RELEASE-amd64 DVD ISO as an optical drive.
** "Disks"
*** Set "Disk Size" to 8GB (or higher)
** "CPU"
*** dual-socket and/or dual-core
** "Memory" - 2GB (minimum)
** "Network" - Virtio


==Install FreeBSD==
==Install FreeBSD==
* Power on the VM.
* Start the VM.
* It should boot to the FreeBSD 10.3-RELEASE-amd64 DVD ISO.
* Boot menu with countdown will show - just wait and it should boot to the optical drive by default and start the installation
* System Components: Disable optional (games, etc).
* ([https://docs.freebsd.org/en/books/handbook/bsdinstall/#bsdinstall-start Installation guide])
* Disks: Automatic ZFS-On-Root Guided, use entire disk.
* ([https://docs.freebsd.org/en/books/handbook/bsdinstall/#bsdinstall-components System Components])
* Network: Use ipv4 only (unless you also use ipv6).
** If you will be installing jail templates, make sure to check "System source tree"
* Network
** Choose vtnet0 VirtIO Networking Adapter
** Use ipv4 ONLY, unless you also use ipv6
* Disks
** Auto (ZFS) Guided Root-on-ZFS, stripe virtual device, choose vtbd0 VirtIO Block Device
** If you are planning to also transfer the image to another cloud host as a standalone OS, make sure they support ZFS, or change your selections accordingly
* Services: Add ntpd.
* Services: Add ntpd.
* This should leave you with FreeBSD 10.3-RELEASE installed on the primary drive.
* Change any other configurations offered. When you get to "Final Configuration" you can select Exit
* Shut down the VM after installation.
* This should leave you with FreeBSD 13.1 RELEASE installed on the primary drive
* Remove the ISO from the VM's optical drive (set to empty).
* Reboot
* Verify the VM's boot order is set to the primary hard disk first.
* After reboot, check:
** In VM > Hardware remove the ISO from the VM's optical drive (set to empty)
** Verify in VM > Options the boot order is set to the primary hard disk first


==First Boot==
==First Boot==
Line 36: Line 62:
</pre>
</pre>
* Reboot
* Reboot
<pre>
reboot
</pre>

Latest revision as of 19:03, 6 January 2023

Setting up a FreeBSD Guest on PVE.

Note: This has been tested with FreeBSD 13.1 RELEASE.

Pre-Install

  • Find the downloadable (amd64 dvd1.iso version).
  • Mimimum hardware (requirements)
    • 2-4GB RAM
    • 8 GB drive space
      • Full install without jails will use at least 5GB
      • If you will be using jails and building kernel from source, use at least 35GB

Create Install Media

  • Option 1: (IDEAL) Using Proxmox GUI, local Storage > Download from URL, copy in (ISO link), query it to get file name, and use the contents of the provided (CHECKSUM file) to verify the download
  • Option 2: Using Proxmox GUI, local Storage > Upload file from your non-Proxmox machine
  • Option 3: (for server without internet) Download ISO image and burn to DVD or save to USB drive then transfer to server

Create VM

  • Use "Create VM" in GUI
  • In "Create: Virtual Machine" use these settings
    • "General" - default settings
    • "OS"
      • Set "ISO Image" to your downloaded ISO file
    • "System" - default settings
    • "Disks"
      • Set "Disk Size" to 8GB (or higher)
    • "CPU"
      • dual-socket and/or dual-core
    • "Memory" - 2GB (minimum)
    • "Network" - Virtio

Install FreeBSD

  • Start the VM.
  • Boot menu with countdown will show - just wait and it should boot to the optical drive by default and start the installation
  • (Installation guide)
  • (System Components)
    • If you will be installing jail templates, make sure to check "System source tree"
  • Network
    • Choose vtnet0 VirtIO Networking Adapter
    • Use ipv4 ONLY, unless you also use ipv6
  • Disks
    • Auto (ZFS) Guided Root-on-ZFS, stripe virtual device, choose vtbd0 VirtIO Block Device
    • If you are planning to also transfer the image to another cloud host as a standalone OS, make sure they support ZFS, or change your selections accordingly
  • Services: Add ntpd.
  • Change any other configurations offered. When you get to "Final Configuration" you can select Exit
  • This should leave you with FreeBSD 13.1 RELEASE installed on the primary drive
  • Reboot
  • After reboot, check:
    • In VM > Hardware remove the ISO from the VM's optical drive (set to empty)
    • Verify in VM > Options the boot order is set to the primary hard disk first

First Boot

  • Power on the VM and log in.
  • Set the time:
ntpdate -s pool.ntp.org
  • Update the system:
freebsd-update fetch
freebsd-update install
  • Reboot
reboot