Install Proxmox VE on Debian Wheezy
The installation of a supported Proxmox VE server should be done via Bare-metal_ISO_Installer. In some case it makes sense to install Proxmox VE on top of a running Debian Wheezy 64-bit, especially if you want a custom partition layout. For this HowTO the following Debian Wheezy ISO was used: debian-7.2.0-amd64-netinst.iso.
Suggested partition layout with LVM:
Device Boot Start End Blocks Id System /dev/sda1 1 122 975872 83 Linux /dev/sda2 122 5222 40965120 8e Linux LVM
LV VG Attr LSize Origin Snap% Move Log Copy% Convert data pve -wi-ao 30.69g root pve -wi-ao 3.72g swap pve -wi-ao 1.86g
We recommend to use ext3 filesystem for best OpenVZ performance and stability.
Install a standard Debian Wheezy (amd64)
Install a standard Debian Wheezy (amd64), for details see Debian. Go for a LVM based partitioning and a fixed IP and take care that you have enough free space for snapshots (needed for online LVM backup with vzdump, OpenVZ containers only)
Please make sure that your hostname is resolvable via /etc/hosts, i.e you need an entry in /etc/hosts which assigns an IPv4 address to that hostname.
Note: Make sure that no IPv6 address for your hostname is specified in /etc/hosts
Example /etc/hosts file:
root@proxmox-6-177:~# cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 192.168.6.177 proxmox-6-177.proxmox.com proxmox-6-177 pvelocalhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts
Install Proxmox VE
Adapt your sources.list
Adapt your sources.list and add the Proxmox VE repository:
deb http://ftp.at.debian.org/debian wheezy main contrib # PVE repository provided by proxmox.com, only for installation (this repo will stay on 3.1) deb http://download.proxmox.com/debian wheezy pve # security updates deb http://security.debian.org/ wheezy/updates main contrib
If it does not work for apt-get of some files, then replace http:// with ftp:// especially in the first two urls above.
Add the Proxmox VE repository key:
wget -O- "http://download.proxmox.com/debian/key.asc" | apt-key add -
Update your repository and system by running:
apt-get update && apt-get dist-upgrade
Install Proxmox VE Kernel
apt-get install pve-firmware pve-kernel-2.6.32-26-pve
Optional - install Kernel headers:
apt-get install pve-headers-2.6.32-26-pve
- Make sure to select Proxmox VE Kernel on the boot loader (grub2) - Attention: Default is the 3.2 kernel
- Reboot: Now restart the system using the Proxmox VE kernel.
Install Proxmox VE packages
Make sure you are running the Proxmox VE Kernel, otherwise the installation will fail.
Check the currently active Kernel:
uname -a Linux 2.6.32-26-pve ...
Remove the Debian kernel:
apt-get remove linux-image-amd64 linux-image-3.2.0-4-amd64
Check grub2 config by running:
Install the Proxmox VE packages:
apt-get install proxmox-ve-2.6.32 ntp ssh lvm2 postfix ksm-control-daemon vzprocps open-iscsi bootlogd
Accept the suggestion to remove Exim and configure postfix according to your network.
Note: Apache2 is not needed anymore as we use our own web server.
Connect to the Proxmox VE web interface
Connect to the admin web interface (https://youripaddress:8006) and configure the vmbr0 and review all other settings, finally reboot to check if everything is running as expected.
Configure apt to use the new packages repositories
Optional: Developer Workstations with Proxmox VE and X11
Proxmox VE is primarily used as virtualization platform with NO additional software installed. In some case it makes sense to have a full desktop running on Proxmox VE, for example for developers using Proxmox VE as their primary workstation/desktop.
For example, just install LXDE desktop and Chromium browser:
apt-get install lxde chromium
If you prefer XFCE4:
apt-get install xfce4 chromium lightdm
Make sure network-manager is not used, else pve-cluster will not start in some cases
apt-get purge network-manager
Don´t forget to install Oracle (Sun) Java, see Java_Console_(Ubuntu)