Prepare Installation Media: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
(fix duplicate import)
No edit summary
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
<!--PVE_IMPORT_START_MARKER-->
<!--PVE_IMPORT_START_MARKER-->
<!-- Do not edit - this is autogenerated content -->
<!-- Do not edit - this is autogenerated content -->
{{#pvedocs:pve-usbstick-plain.html}}
{{#pvedocs:pve-installation-media-plain.html}}
[[Category:Reference Documentation]]
[[Category:Reference Documentation]]
<pvehide>
<pvehide>
The Proxmox VE installation media is now a hybrid ISO image, working in two
Download the installer ISO image from: https://www.proxmox.com/en/downloads/proxmox-virtual-environment/iso
ways:
The Proxmox VE installation media is a hybrid ISO image. It works in two ways:
An ISO image file ready to burn on CD
An ISO image file ready to burn to a CD or DVD.
A raw sector (IMG) image file ready to directly copy to flash media
A raw sector (IMG) image file ready to copy to a USB flash drive (USB stick).
  (USB Stick)
Using a USB flash drive to install Proxmox VE is the recommended way because it is
Using USB sticks is faster and more environmental friendly and
the faster option.
therefore the recommended way to install Proxmox VE.
Prepare a USB Flash Drive as Installation Medium
Prepare a USB flash drive as install medium
The flash drive needs to have at least 1 GB of storage available.
In order to boot the installation media, copy the ISO image to a USB
Do not use UNetbootin. It does not work with the Proxmox VE installation image.
media.
Make sure that the USB flash drive is not mounted and does not
First download the ISO image from
https://www.proxmox.com/en/downloads/category/iso-images-pve
You need at least a 1 GB USB media.
Using UNetbootin or Rufus does not work.
Make sure that the USB media is not mounted and does not
contain any important data.
contain any important data.
Instructions for GNU/Linux
Instructions for GNU/Linux
You can simply use dd on UNUX like systems. First download the ISO
On Unix-like operating system use the dd command to copy the ISO image to the
image, then plug in the USB stick. You need to find out what device
USB flash drive. First find the correct device name of the USB flash drive (see
name gets assigned to the USB stick (see below). Then run:
below). Then run the dd command.
dd if=proxmox-ve_*.iso of=/dev/XYZ bs=1M
# dd bs=1M conv=fdatasync if=./proxmox-ve_*.iso of=/dev/XYZ
Be sure to replace /dev/XYZ with the correct device name.
Be sure to replace /dev/XYZ with the correct device name and adapt the
Be very careful, and do not overwrite the hard disk!
input filename (if) path.
Find Correct USB Device Name
Be very careful, and do not overwrite the wrong disk!
You can compare the last lines of dmesg command before and after the
Find the Correct USB Device Name
insertion, or use the lsblk command. Open a terminal and run:
There are two ways to find out the name of the USB flash drive. The first one is
lsblk
to compare the last lines of the dmesg command output before and after
Then plug in your USB media and run the command again:
plugging in the flash drive. The second way is to compare the output of the
lsblk
lsblk command. Open a terminal and run:
A new device will appear, and this is the USB device you want to use.
# lsblk
Instructions for OSX
Then plug in your USB flash drive and run the command again:
# lsblk
A new device will appear. This is the one you want to use. To be on the extra
safe side check if the reported size matches your USB flash drive.
Instructions for macOS
Open the terminal (query Terminal in Spotlight).
Open the terminal (query Terminal in Spotlight).
Convert the .iso file to .img using the convert option of hdiutil for example.
Convert the .iso file to .dmg format using the convert option of hdiutil,
hdiutil convert -format UDRW -o proxmox-ve_*.dmg proxmox-ve_*.iso
for example:
OS X tends to put the .dmg ending on the output file automatically.
# hdiutil convert proxmox-ve_*.iso -format UDRW -o proxmox-ve_*.dmg
To get the current list of devices run the command again:
macOS tends to automatically add .dmg to the output file name.
diskutil list
To get the current list of devices run the command:
Now insert your USB flash media and run this command again to
# diskutil list
determine the device node assigned to your flash media
Now insert the USB flash drive and run this command again to determine which
(e.g. /dev/diskX).
device node has been assigned to it. (e.g., /dev/diskX).
diskutil list
# diskutil list
diskutil unmountDisk /dev/diskX
# diskutil unmountDisk /dev/diskX
replace X with the disk number from the last command.
replace X with the disk number from the last command.
sudo dd if=proxmox-ve_*.dmg of=/dev/rdiskN bs=1m
# sudo dd if=proxmox-ve_*.dmg bs=1M of=/dev/rdiskX
rdiskX, instead of diskX, in the last command is intended. It will
increase the write speed.
Instructions for Windows
Instructions for Windows
In order to copy the ISO, rename it first. Just rename the downloaded
Using Etcher
file from proxmox-ve_*.iso to proxmox-ve_*.raw.
Etcher works out of the box. Download Etcher from https://etcher.io. It will
Download the SUSE Studio ImageWriter from https://en.opensuse.org/SDB:Live_USB_stick
guide you through the process of selecting the ISO and your USB flash drive.
If this doesn’t work, alternative use the OSForsenics USB
Using Rufus
installer from http://www.osforensics.com/portability.html
Rufus is a more lightweight alternative, but you need to use the DD mode to
Boot your server from USB media
make it work. Download Rufus from https://rufus.ie/. Either install it or use
Connect your USB media to your server and make sure that the server
the portable version. Select the destination drive and the Proxmox VE ISO file.
boots from USB (see server BIOS). Then follow the installation wizard.
Once you Start you have to click No on the dialog asking to
download a different version of GRUB. In the next dialog select the DD mode.
Boot your Server from the USB Flash Drive
Connect the USB flash drive to your server and make sure that booting from USB
is enabled (check your servers firmware settings). Then follow the steps in the
installation wizard.
</pvehide>
</pvehide>
<!--PVE_IMPORT_END_MARKER-->
<!--PVE_IMPORT_END_MARKER-->


[[Category: HOWTO]]
[[Category: HOWTO]]

Latest revision as of 14:11, 23 November 2023

The Proxmox VE installation media is a hybrid ISO image. It works in two ways:

  • An ISO image file ready to burn to a CD or DVD.

  • A raw sector (IMG) image file ready to copy to a USB flash drive (USB stick).

Using a USB flash drive to install Proxmox VE is the recommended way because it is the faster option.

Prepare a USB Flash Drive as Installation Medium

The flash drive needs to have at least 1 GB of storage available.

Note Do not use UNetbootin. It does not work with the Proxmox VE installation image.
Important Make sure that the USB flash drive is not mounted and does not contain any important data.

Instructions for GNU/Linux

On Unix-like operating system use the dd command to copy the ISO image to the USB flash drive. First find the correct device name of the USB flash drive (see below). Then run the dd command.

# dd bs=1M conv=fdatasync if=./proxmox-ve_*.iso of=/dev/XYZ
Note Be sure to replace /dev/XYZ with the correct device name and adapt the input filename (if) path.
Caution Be very careful, and do not overwrite the wrong disk!

Find the Correct USB Device Name

There are two ways to find out the name of the USB flash drive. The first one is to compare the last lines of the dmesg command output before and after plugging in the flash drive. The second way is to compare the output of the lsblk command. Open a terminal and run:

# lsblk

Then plug in your USB flash drive and run the command again:

# lsblk

A new device will appear. This is the one you want to use. To be on the extra safe side check if the reported size matches your USB flash drive.

Instructions for macOS

Open the terminal (query Terminal in Spotlight).

Convert the .iso file to .dmg format using the convert option of hdiutil, for example:

# hdiutil convert proxmox-ve_*.iso -format UDRW -o proxmox-ve_*.dmg
Tip macOS tends to automatically add .dmg to the output file name.

To get the current list of devices run the command:

# diskutil list

Now insert the USB flash drive and run this command again to determine which device node has been assigned to it. (e.g., /dev/diskX).

# diskutil list
# diskutil unmountDisk /dev/diskX
Note replace X with the disk number from the last command.
# sudo dd if=proxmox-ve_*.dmg bs=1M of=/dev/rdiskX
Note rdiskX, instead of diskX, in the last command is intended. It will increase the write speed.

Instructions for Windows

Using Etcher

Etcher works out of the box. Download Etcher from https://etcher.io. It will guide you through the process of selecting the ISO and your USB flash drive.

Using Rufus

Rufus is a more lightweight alternative, but you need to use the DD mode to make it work. Download Rufus from https://rufus.ie/. Either install it or use the portable version. Select the destination drive and the Proxmox VE ISO file.

Important Once you Start you have to click No on the dialog asking to download a different version of GRUB. In the next dialog select the DD mode.

Boot your Server from the USB Flash Drive

Connect the USB flash drive to your server and make sure that booting from USB is enabled (check your servers firmware settings). Then follow the steps in the installation wizard.