Prepare Installation Media: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
m (Api moved page Install from USB Stick to Prepare Installation Media: Workaround for change article name)
No edit summary
Line 1: Line 1:
<!--PVE_IMPORT_START_MARKER-->
<!--PVE_IMPORT_START_MARKER-->
<!-- Do not edit - this is autogenerated content -->
<!-- Do not edit - this is autogenerated content -->
{{#pvedocs:pve-usbstick-plain.html}}
{{#pvedocs:pve-installation-media-plain.html}}
[[Category:Reference Documentation]]
[[Category:Reference Documentation]]
<pvehide>
<pvehide>
The Proxmox VE installation media is a hybrid ISO image, working in two ways:
Download the installer ISO image from: https://www.proxmox.com/en/downloads/category/iso-images-pve
An ISO image file ready to burn on CD
The Proxmox VE installation media is a hybrid ISO image. It works in two ways:
A raw sector (IMG) image file ready to directly copy to flash media
An ISO image file ready to burn to a CD or DVD.
  (USB Stick)
A raw sector (IMG) image file ready to copy to a USB flash drive (USB stick).
Using USB sticks is faster and more environmental friendly and
Using a USB flash drive to install Proxmox VE is the recommended way because it is
therefore the recommended way to install Proxmox VE.
the faster option.
Prepare a USB flash drive as install medium
Prepare a USB Flash Drive as Installation Medium
In order to boot the installation media, copy the ISO image to a USB
The flash drive needs to have at least 1 GB of storage available.
media.
Do not use UNetbootin. It does not work with the Proxmox VE installation image.
First download the ISO image from
Make sure that the USB flash drive is not mounted and does not
https://www.proxmox.com/en/downloads/category/iso-images-pve
You need at least a 1 GB USB media.
Using UNetbootin or Rufus does not work.
Make sure that the USB media is not mounted and does not
contain any important data.
contain any important data.
Instructions for GNU/Linux
Instructions for GNU/Linux
You can simply use dd on UNIX like systems. First download the ISO
On Unix-like operating system use the dd command to copy the ISO image to the
image, then plug in the USB stick. You need to find out what device
USB flash drive. First find the correct device name of the USB flash drive (see
name gets assigned to the USB stick (see below). Then run:
below). Then run the dd command.
dd if=proxmox-ve_*.iso of=/dev/XYZ bs=1M
# dd bs=1M conv=fdatasync if=./proxmox-ve_*.iso of=/dev/XYZ
Be sure to replace /dev/XYZ with the correct device name.
Be sure to replace /dev/XYZ with the correct device name and adapt the
Be very careful, and do not overwrite the hard disk!
input filename (if) path.
Find Correct USB Device Name
Be very careful, and do not overwrite the wrong disk!
You can compare the last lines of dmesg command before and after the
Find the Correct USB Device Name
insertion, or use the lsblk command. Open a terminal and run:
There are two ways to find out the name of the USB flash drive. The first one is
lsblk
to compare the last lines of the dmesg command output before and after
Then plug in your USB media and run the command again:
plugging in the flash drive. The second way is to compare the output of the
lsblk
lsblk command. Open a terminal and run:
A new device will appear, and this is the USB device you want to use.
# lsblk
Instructions for OSX
Then plug in your USB flash drive and run the command again:
# lsblk
A new device will appear. This is the one you want to use. To be on the extra
safe side check if the reported size matches your USB flash drive.
Instructions for macOS
Open the terminal (query Terminal in Spotlight).
Open the terminal (query Terminal in Spotlight).
Convert the .iso file to .img using the convert option of hdiutil for example.
Convert the .iso file to .img using the convert option of hdiutil for example.
hdiutil convert -format UDRW -o proxmox-ve_*.dmg proxmox-ve_*.iso
# hdiutil convert -format UDRW -o proxmox-ve_*.dmg proxmox-ve_*.iso
OS X tends to put the .dmg ending on the output file automatically.
macOS tends to automatically add .dmg to the output file name.
To get the current list of devices run the command again:
To get the current list of devices run the command:
diskutil list
# diskutil list
Now insert your USB flash media and run this command again to
Now insert the USB flash drive and run this command again to determine which
determine the device node assigned to your flash media
device node has been assigned to it. (e.g., /dev/diskX).
(e.g. /dev/diskX).
# diskutil list
diskutil list
# diskutil unmountDisk /dev/diskX
diskutil unmountDisk /dev/diskX
replace X with the disk number from the last command.
replace X with the disk number from the last command.
sudo dd if=proxmox-ve_*.dmg of=/dev/rdiskX bs=1m
# sudo dd if=proxmox-ve_*.dmg of=/dev/rdiskX bs=1m
rdiskX, instead of diskX, in the last command is intended,
rdiskX, instead of diskX, in the last command is intended. It will
this will increase write speed
increase the write speed.
Instructions for Windows
Instructions for Windows
Download Etcher from https://etcher.io , select the ISO and your USB Drive.
Download Rufus from https://rufus.ie/. Either install it or use the portable
If this doesn&#8217;t work, alternatively use the OSForensics USB
version. Select the destination drive and the Proxmox VE ISO file.
installer from http://www.osforensics.com/portability.html
Once you click Start a dialog asking to download a different version of GRUB
Boot your server from USB media
will show up. Click No. In the next dialog select the DD mode.
Connect your USB media to your server and make sure that the server
An alternative to Rufus is Etcher. Download Etcher from https://etcher.io. It
boots from USB (see server BIOS). Then follow the installation wizard.
will guide you through the process of selecting the ISO and your USB Drive.
Boot your Server from the USB Flash Drive
Connect the USB flash drive to your server and make sure that booting from USB
is enabled (check your servers firmware settings). Then follow the steps in the
installation wizard.
</pvehide>
</pvehide>
<!--PVE_IMPORT_END_MARKER-->
<!--PVE_IMPORT_END_MARKER-->

Revision as of 13:54, 21 February 2020

The Proxmox VE installation media is a hybrid ISO image. It works in two ways:

  • An ISO image file ready to burn to a CD or DVD.

  • A raw sector (IMG) image file ready to copy to a USB flash drive (USB stick).

Using a USB flash drive to install Proxmox VE is the recommended way because it is the faster option.

Prepare a USB Flash Drive as Installation Medium

The flash drive needs to have at least 1 GB of storage available.

Note Do not use UNetbootin. It does not work with the Proxmox VE installation image.
Important Make sure that the USB flash drive is not mounted and does not contain any important data.

Instructions for GNU/Linux

On Unix-like operating system use the dd command to copy the ISO image to the USB flash drive. First find the correct device name of the USB flash drive (see below). Then run the dd command.

# dd bs=1M conv=fdatasync if=./proxmox-ve_*.iso of=/dev/XYZ
Note Be sure to replace /dev/XYZ with the correct device name and adapt the input filename (if) path.
Caution Be very careful, and do not overwrite the wrong disk!

Find the Correct USB Device Name

There are two ways to find out the name of the USB flash drive. The first one is to compare the last lines of the dmesg command output before and after plugging in the flash drive. The second way is to compare the output of the lsblk command. Open a terminal and run:

# lsblk

Then plug in your USB flash drive and run the command again:

# lsblk

A new device will appear. This is the one you want to use. To be on the extra safe side check if the reported size matches your USB flash drive.

Instructions for macOS

Open the terminal (query Terminal in Spotlight).

Convert the .iso file to .dmg format using the convert option of hdiutil, for example:

# hdiutil convert proxmox-ve_*.iso -format UDRW -o proxmox-ve_*.dmg
Tip macOS tends to automatically add .dmg to the output file name.

To get the current list of devices run the command:

# diskutil list

Now insert the USB flash drive and run this command again to determine which device node has been assigned to it. (e.g., /dev/diskX).

# diskutil list
# diskutil unmountDisk /dev/diskX
Note replace X with the disk number from the last command.
# sudo dd if=proxmox-ve_*.dmg bs=1M of=/dev/rdiskX
Note rdiskX, instead of diskX, in the last command is intended. It will increase the write speed.

Instructions for Windows

Using Etcher

Etcher works out of the box. Download Etcher from https://etcher.io. It will guide you through the process of selecting the ISO and your USB flash drive.

Using Rufus

Rufus is a more lightweight alternative, but you need to use the DD mode to make it work. Download Rufus from https://rufus.ie/. Either install it or use the portable version. Select the destination drive and the Proxmox VE ISO file.

Important Once you Start you have to click No on the dialog asking to download a different version of GRUB. In the next dialog select the DD mode.

Boot your Server from the USB Flash Drive

Connect the USB flash drive to your server and make sure that booting from USB is enabled (check your servers firmware settings). Then follow the steps in the installation wizard.