Difference between revisions of "Proxmox Node Management"

From Proxmox VE
Jump to: navigation, search
(Created page with "<!--PVE_IMPORT_START_MARKER--> <!-- Do not edit - this is autogenerated content --> {{#pvedocs:pvenode-plain.html}} Category:Reference Documentation <pvehide> The Pro...")
 
 
(One intermediate revision by the same user not shown)
Line 8: Line 8:
 
Currently pvenode allows to set a node&#8217;s description and to manage
 
Currently pvenode allows to set a node&#8217;s description and to manage
 
the node&#8217;s SSL certificates used for the API and the web GUI through pveproxy.
 
the node&#8217;s SSL certificates used for the API and the web GUI through pveproxy.
EXAMPLES
+
Wake-on-LAN
pvenode cert set certificate.crt certificate.key -force
+
Wake-on-LAN (WoL) allows to switch on a sleeping computer in the network by
Install an externally provided certificate. Both files need to be PEM encoded.
+
sending a magic packet. At least one NIC must support this feature and the
certificate.key contains the private key and certificate.crt contains the
+
respective option needs to be enabled in the computers firmware (BIOS/UEFI)
whole certificate chain.
+
configuration. The option name can vary from Enable Wake-on-Lan to
pvenode acme account register default mail@example.invalid
+
Power On By PCIE Device, check your motherboards vendor manual, if unsure.
pvenode config set --acme domains=example.invalid
+
ethtool can be used to check the WoL configuration of &lt;interface&gt; by
pvenode acme cert order
+
running:
systemctl restart pveproxy
+
ethtool &lt;interface&gt; | grep Wake-on
Setup ACME account and order a certificate for local node.
+
pvenode allows to wake sleeping members of a cluster via WoL using the
 +
command:
 +
pvenode wakeonlan &lt;node&gt;
 +
This broadcasts the WoL magic packet on UDP port 9, containing the MAC address
 +
of &lt;node&gt; obtained from the wakeonlan property. The node specific
 +
wakeonlan property can be set by the following command:
 +
pvenode config set -wakeonlan XX:XX:XX:XX:XX:XX
 
</pvehide>
 
</pvehide>
 
<!--PVE_IMPORT_END_MARKER-->
 
<!--PVE_IMPORT_END_MARKER-->

Latest revision as of 10:51, 12 May 2020

The Proxmox VE node management tool (pvenode) allows to control node specific settings and resources.

Currently pvenode allows to set a node’s description and to manage the node’s SSL certificates used for the API and the web GUI through pveproxy.

Wake-on-LAN

Wake-on-LAN (WoL) allows to switch on a sleeping computer in the network by sending a magic packet. At least one NIC must support this feature and the respective option needs to be enabled in the computers firmware (BIOS/UEFI) configuration. The option name can vary from Enable Wake-on-Lan to Power On By PCIE Device, check your motherboards vendor manual, if unsure. ethtool can be used to check the WoL configuration of <interface> by running:

ethtool <interface> | grep Wake-on

pvenode allows to wake sleeping members of a cluster via WoL using the command:

pvenode wakeonlan <node>

This broadcasts the WoL magic packet on UDP port 9, containing the MAC address of <node> obtained from the wakeonlan property. The node specific wakeonlan property can be set by the following command:

pvenode config set -wakeonlan XX:XX:XX:XX:XX:XX