Proxmox VE Kernel: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
 
(22 intermediate revisions by 5 users not shown)
Line 1: Line 1:
=Introduction=
== Introduction ==
Proxmox VE supports currently three kernel branches, each one with minor feature differences. Beginning with 1.9 the 2.6.32 is the default and highly recommended branch. (Proxmox VE 0.9 beta till Proxmox 1.4 used 2.6.24, Proxmox 1.5 used 2.6.18).
Kernel versions in use in various Proxmox VE versions are listed here.


A Proxmox VE cluster master can manage a mixed kernel setup. For example, you can run two nodes with 2.6.18 and two nodes with 2.6.32 and also nodes with 2.6.35. Depending on the features, some migrations are only possible between identical kernels.
== Linux Kernel ==
The Linux kernel is a Unix-like operating system kernel. Released under the GNU General Public License version 2 (GPLv2) and developed by contributors worldwide, Linux is one of the most prominent examples of free software.


For correctly effecting a kernel change, it may be necessary to '''edit''' the '''/etc/fstab''' file for the '''/boot''' mount.
== Proxmox VE 8.x ==
The stable 8.x release uses currently the 6.2 kernel since Proxmox VE 8.0. The 6.2 kernel is derived from Ubuntu 23.04.


=Kernel 2.6.18=
Proxmox VE 8.1 (2023/Q4) will be based on the 6.5 kernel, derived from Ubuntu 23.10.
*Old Stable OpenVZ
*Old Stable KVM


==How to install 2.6.18==
== Proxmox VE 7.x ==
<pre>aptitude update
The old stable 7.x release uses currently the 5.15 LTS kernel since Proxmox VE 7.2.
aptitude safe-upgrade
This kernel is derived from Ubuntu 22.04, as default.
aptitude install proxmox-ve-2.6.18</pre>


To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.
The 6.2 based LTS kernel, derived from the (upcoming) Ubuntu 23.04 downstream repository, is provided as opt-in.


proxmox-ve-2.6.18:~# pveversion -v
== Proxmox VE 6.x ==
The EOL 6.x release uses latest Ubuntu 20.04 based kernel. The first stable 6.0 release is based on 5.0 Linux kernel (Ubuntu 19.10).
pve-manager: 1.9-24 (pve-manager/1.9/6542)
running kernel: 2.6.18-6-pve
proxmox-ve-2.6.18: 1.8-15
pve-kernel-2.6.18-6-pve: 2.6.18-15
qemu-server: 1.1-32
pve-firmware: 1.0-13
libpve-storage-perl: 1.0-19
vncterm: 0.9-2
vzctl: 3.0.28-1pve5
vzdump: 1.2-15
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm-2.6.18: 0.9.1-15


=Kernel 2.6.24 (outdated)=
Since Proxmox VE 6.2 it is based on the 5.4 LTS Linux Kernel (using the Ubuntu 20.04 LTS Focal Kernel as a base).
'''Note''': not compatible to the latest vzctl 3.0.26 (missing vzeventd), => you need to switch to a newer branch
*OpenVZ
*KVM


==How to install 2.6.24==
== Proxmox VE 5.x ==
<pre>aptitude update
The EOL 5.x release used latest Ubuntu 18.04 based kernel. The first stable 5.0 release is based on 4.13 Linux kernel (Ubuntu 17.10 Artful).
aptitude safe-upgrade
aptitude install proxmox-ve-2.6.24</pre>


To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.
Since Proxmox VE 5.2 it is based on the 4.15 LTS Linux Kernel (using the Ubuntu 18.04 LTS Bionic Kernel as a base).
The 4.13 received some updates after adoption of 4.15 as initially some hardware issues (NIC, SCSI) arose - those should be fixed by now, and we heavily suggest switching over to the 4.15 kernel by installing the pve-kernel-4.15 meta package - it includes, among other fixes, important security enhancements.


=Kernel 2.6.32 (recommended)=
== Proxmox VE 4.x ==
*Latest KVM
The EOL 4.x release used latest Ubuntu 16.04 based kernel. The first 4.0 release was based on 4.2 Linux kernel.
*Stable OpenVZ
*based on RHEL6x
*Default Kernel branch since Proxmox VE 1.6
==How to install 2.6.32==
<pre>aptitude update
aptitude safe-upgrade
aptitude install proxmox-ve-2.6.32</pre>


To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.
Since Proxmox VE 4.2 it is based on the 4.4 LTS Linux Kernel (using the Ubuntu 16.04 LTS Xenial Kernel as a base).


proxmox-ve-2.6.32:~# pveversion -v
== Proxmox VE 3.x ==
pve-manager: 1.9-24 (pve-manager/1.9/6542)
running kernel: 2.6.32-6-pve
proxmox-ve-2.6.32: 1.9-43
pve-kernel-2.6.32-6-pve: 2.6.32-43
qemu-server: 1.1-32
pve-firmware: 1.0-13
libpve-storage-perl: 1.0-19
vncterm: 0.9-2
vzctl: 3.0.28-1pve5
vzdump: 1.2-15
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.15.0-1
ksm-control-daemon: 1.0-6


=Kernel 2.6.35=
The EOL Proxmox VE 3.x supported two kernel branches. Support for 3.x will end in April 2016.
*Latest KVM
*No OpenVZ


==How to install 2.6.35==
A Proxmox VE cluster can manage a mixed kernel setup. Depending on the features, some migrations are only possible between identical kernels or identical KVM versions.
The 2.6.35 was introduced to support KSM. As KSM works now also with the default 2.6.32, this kernel branch will get no more updates, all users should switch to 2.6.32.


<pre>aptitude update
=== Kernel 3.10 ===
aptitude safe-upgrade
* Latest KVM
aptitude install proxmox-ve-2.6.35</pre>
* NO OpenVZ support
* LXC supported
* based on RHEL7x
* Default Kernel for 4.x


To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.
=== Kernel 2.6.32 ===
* Latest KVM
* Stable OpenVZ
* based on RHEL6x now
* Default Kernel for 3.x and lower


proxmox-ve-2.6.35:~# pveversion -v
[[Category: HOWTO]] [[Category: Installation]]
pve-manager: 1.9-24 (pve-manager/1.9/6542)
running kernel: 2.6.35-1-pve
proxmox-ve-2.6.35: 1.8-13
pve-kernel-2.6.35-2-pve: 2.6.35-13
qemu-server: 1.1-32
pve-firmware: 1.0-13
libpve-storage-perl: 1.0-19
vncterm: 0.9-2
vzctl: 3.0.28-1pve5
vzdump: 1.2-15
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.15.0-1
ksm-control-daemon: 1.0-6
 
 
 
[[Category: HOWTO]][[Category: Technology]][[Category: Installation]]

Latest revision as of 09:12, 12 July 2023

Introduction

Kernel versions in use in various Proxmox VE versions are listed here.

Linux Kernel

The Linux kernel is a Unix-like operating system kernel. Released under the GNU General Public License version 2 (GPLv2) and developed by contributors worldwide, Linux is one of the most prominent examples of free software.

Proxmox VE 8.x

The stable 8.x release uses currently the 6.2 kernel since Proxmox VE 8.0. The 6.2 kernel is derived from Ubuntu 23.04.

Proxmox VE 8.1 (2023/Q4) will be based on the 6.5 kernel, derived from Ubuntu 23.10.

Proxmox VE 7.x

The old stable 7.x release uses currently the 5.15 LTS kernel since Proxmox VE 7.2. This kernel is derived from Ubuntu 22.04, as default.

The 6.2 based LTS kernel, derived from the (upcoming) Ubuntu 23.04 downstream repository, is provided as opt-in.

Proxmox VE 6.x

The EOL 6.x release uses latest Ubuntu 20.04 based kernel. The first stable 6.0 release is based on 5.0 Linux kernel (Ubuntu 19.10).

Since Proxmox VE 6.2 it is based on the 5.4 LTS Linux Kernel (using the Ubuntu 20.04 LTS Focal Kernel as a base).

Proxmox VE 5.x

The EOL 5.x release used latest Ubuntu 18.04 based kernel. The first stable 5.0 release is based on 4.13 Linux kernel (Ubuntu 17.10 Artful).

Since Proxmox VE 5.2 it is based on the 4.15 LTS Linux Kernel (using the Ubuntu 18.04 LTS Bionic Kernel as a base). The 4.13 received some updates after adoption of 4.15 as initially some hardware issues (NIC, SCSI) arose - those should be fixed by now, and we heavily suggest switching over to the 4.15 kernel by installing the pve-kernel-4.15 meta package - it includes, among other fixes, important security enhancements.

Proxmox VE 4.x

The EOL 4.x release used latest Ubuntu 16.04 based kernel. The first 4.0 release was based on 4.2 Linux kernel.

Since Proxmox VE 4.2 it is based on the 4.4 LTS Linux Kernel (using the Ubuntu 16.04 LTS Xenial Kernel as a base).

Proxmox VE 3.x

The EOL Proxmox VE 3.x supported two kernel branches. Support for 3.x will end in April 2016.

A Proxmox VE cluster can manage a mixed kernel setup. Depending on the features, some migrations are only possible between identical kernels or identical KVM versions.

Kernel 3.10

  • Latest KVM
  • NO OpenVZ support
  • LXC supported
  • based on RHEL7x
  • Default Kernel for 4.x

Kernel 2.6.32

  • Latest KVM
  • Stable OpenVZ
  • based on RHEL6x now
  • Default Kernel for 3.x and lower