Proxmox VE Kernel: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
(Added updates for 2.6.32)
Line 3: Line 3:


A Proxmox VE cluster master can manage a mixed kernel setup. For example, you can run two nodes with 2.6.18 and two nodes with 2.6.32 and also nodes with 2.6.24. Depending on the features, some migrations are only possible between identical kernels.
A Proxmox VE cluster master can manage a mixed kernel setup. For example, you can run two nodes with 2.6.18 and two nodes with 2.6.32 and also nodes with 2.6.24. Depending on the features, some migrations are only possible between identical kernels.
 
2.6.18 and 2.6.24 kernel branches are using [[DRBD]] 8.3.4, 2.6.32 uses 8.3.7 (DRBD is now integrated in the Kernel).
All three kernel branches are using [[DRBD]] 8.3.4.


For correctly effecting a kernel change, it may be necessary to '''edit''' the '''/etc/fstab''' file for the '''/boot''' mount.
For correctly effecting a kernel change, it may be necessary to '''edit''' the '''/etc/fstab''' file for the '''/boot''' mount.
Line 31: Line 30:


=Kernel 2.6.32=
=Kernel 2.6.32=
*Latest KVM with [[KSM]] (shares identical memory pages, especially useful when running multiple guests from the same or similar base operating system image. Because memory is shared, the combined memory usage of the guests is reduced)
*Latest KVM
* This kernel has currently no OpenVZ support (but should be available later this year)
*Newest OpenVZ (maintained development branch)
*Default Kernel branch since Proxmox VE 1.6
==How to install 2.6.32==
==How to install 2.6.32==
<pre>aptitude update
<pre>aptitude update
Line 39: Line 39:


To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.
To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.


[[Category: HOWTO]][[Category: Technology]][[Category: Installation]]
[[Category: HOWTO]][[Category: Technology]][[Category: Installation]]

Revision as of 10:45, 2 September 2010

Introduction

Proxmox publishes three kernel branches, each one with minor feature differences. Beginning with 1.5 the 2.6.18 is the default and recommended branch. (Proxmox VE 0.9 beta till Proxmox 1.4 used 2.6.24).

A Proxmox VE cluster master can manage a mixed kernel setup. For example, you can run two nodes with 2.6.18 and two nodes with 2.6.32 and also nodes with 2.6.24. Depending on the features, some migrations are only possible between identical kernels. 2.6.18 and 2.6.24 kernel branches are using DRBD 8.3.4, 2.6.32 uses 8.3.7 (DRBD is now integrated in the Kernel).

For correctly effecting a kernel change, it may be necessary to edit the /etc/fstab file for the /boot mount.

Kernel 2.6.18

  • Stable OpenVZ
  • Stable KVM (Note: no scsi emulation for guests, only IDE and VIRTIO)

How to install 2.6.18

aptitude update
aptitude safe-upgrade
aptitude install proxmox-ve-2.6.18

To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.

Kernel 2.6.24

  • OpenVZ
  • KVM

How to install 2.6.24

aptitude update
aptitude safe-upgrade
aptitude install proxmox-ve-2.6.24

To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.

Kernel 2.6.32

  • Latest KVM
  • Newest OpenVZ (maintained development branch)
  • Default Kernel branch since Proxmox VE 1.6

How to install 2.6.32

aptitude update
aptitude safe-upgrade
aptitude install proxmox-ve-2.6.32

To make sure that you boot into the new kernel, check /boot/grub/menu.lst. Now reboot and check if the system is running the right kernel.