Difference between revisions of "Raid controller"
Copymaster (talk | contribs) |
Copymaster (talk | contribs) (→3Ware) |
||
| Line 8: | Line 8: | ||
'''9690SA SAS/SATA-II RAID PCIe (rev 01)''' | '''9690SA SAS/SATA-II RAID PCIe (rev 01)''' | ||
| − | This Adapter is working well under Proxmox. '''Attention:''' make sure you have write cache enabled and use a BBU! Without write cache the vms seem to 'hang' or 'freeze' sometimes. Performance | + | This Adapter is working well under Proxmox. '''Attention:''' make sure you have write cache enabled and use a BBU! Without write cache the vms seem to 'hang' or 'freeze' sometimes. Performance give about 50MB/s on a Raid 5 with 3 HDD's a 1TB |
| − | |||
=Adaptec= | =Adaptec= | ||
Revision as of 11:04, 17 December 2009
work in progress.
Introduction
A fast and reliable storage controller is one of the most important parts of a Proxmox VE server. This article lists some good working hardware raid controllers and some information about the used configurations. If you wonder how to figure out which Controller you have, log into your Proxmox server and type 'lspci' on the commandline. Then look for a line with RAID Controller or similar.
3Ware
9690SA SAS/SATA-II RAID PCIe (rev 01)
This Adapter is working well under Proxmox. Attention: make sure you have write cache enabled and use a BBU! Without write cache the vms seem to 'hang' or 'freeze' sometimes. Performance give about 50MB/s on a Raid 5 with 3 HDD's a 1TB
Adaptec
All Adaptec controllers with BBU unit are known to perform well. If possible, take one with "Zero-Maintenance Cache Protection", e.g. Adaptec 5805Z.
Configuration
Raid 10