Storage: ZFS

From Proxmox VE
Jump to navigation Jump to search

zfs notes

Native ZFS for Linux on Proxmox 2.0

I had tried 3 other operating systems and for each was able to recover all the zfs file systems from previous installs. today I set up zfsonlinux using the following info on 2 prox 2.0 systems

  • install these
aptitude install build-essential gawk alien fakeroot zlib1g-dev uuid uuid-dev libssl-dev parted  pve-headers-$(uname -r) 
  • get make and install spl
cd /usr/src
git clone https://github.com/zfsonlinux/spl.git
cd spl
./configure
make deb
sudo dpkg -i *.deb
modprobe spl
  • get make and install zfs
cd /usr/src
git clone https://github.com/zfsonlinux/zfs.git
cd zfs
./configure
make deb
dpkg -i *.deb
modprobe zfs

if you do not have and zfs pools made then put this to /etc/modules

spl
zfs

reboot to make sure modules load at boot. I found on one system with limited memory [ compared to what was running] that zfs module would not load .

Create filesystems, and mount points

zfs create tank/home
zfs set mountpoint=/export/home tank/home

zfs create tank/bkup
zfs set mountpoint=/bkup tank/bkup

zfs create tank/ht
zfs set mountpoint=/export/ht tank/ht

Create home directories for several users

  • Note: automatically mounted at /export/home/{joe,bill,tom} thanks to inheritance
zfs create tank/home/joe
zfs create tank/home/bill
zfs create tank/home/tom

Setting Properties

  • Automatically NFS-export all home directories
# zfs set sharenfs=rw tank/home

2012-02-24: debsd

 zfs set sharenfs=r zfs-pool/ht
warning: mountd isn't supported in Debian GNU/kFreeBSD yet
  • check sharenfs
zfs get sharenfs tank/ht
NAME     PROPERTY  VALUE     SOURCE
tank/ht  sharenfs  rw        local
  • Turn on compression for everything in the pool
# zfs set compression=on tank
  • Limit Eric to a quota of 10g
# zfs set quota=10g tank/home/eschrock
  • Guarantee Tabriz a reservation of 20g
# zfs set reservation=20g tank/home/tabriz

zfs links

there is a lot of well written information on zfs. here are some links:

check this first

and this has some very important information to know before implementing zfs on a production system.

How to install ZFS-fuse under Proxmox

(Tested with Kernel 2.6.32)

 apt-get install build-essential libaio-dev libattr1-dev libacl1-dev libz-dev libz-dev libfuse-dev libfuse2 scons libssl-dev
 wget -nd http://zfs-fuse.net/releases/0.6.0/zfs-fuse-0.6.0.tar.bz2
 tar jxvf zfs-fuse-0.6.0.tar.bz2
 cd zfs-fuse-0.6.0
 cd src
 scons
 scond install

Fire up ZFS-fuse daemon

 /usr/local/sbin/zfs-fuse

Create Zpool

 zpool create -m /var/lib/vz/images2 /dev/sdb

Create ZFS

 zfs create images2/109

ZFS clone a vm 109 to vm 110

 zfs snapshot images2/109@master
 zfs clone images2/109@master images2/110

Debian GNU/kFreeBSD

As of 2012-02 the squeeze version does not have NFS, so AFAIK can not be used for Proxmox storage. When Debsd has nfs support then I'd use this for storage of iso's and backups to start. In the mean time this works as a samba server..

zfs works much better using Debian/GNU kFreeBSD then fuse.

after installing the system to kvm or hardware:

  • add some disks . in KVM i was only able to get ide to work.
  • the scsi disks look like:
ls /dev/ad*
/dev/ad10  /dev/ad10s1  /dev/ad10s2  /dev/ad11  /dev/ad12  /dev/ad13
  • if the disks have partition tables, then clear them. just not the operating system disk! I used fdisk to clear the tables. This may not be necessary , if it is not then please delete this part.
fdisk /dev/ad11
o
w

then same for ad12 and ad13


  • install this
aptitude install zfsutils
  • make a pool
zpool create -f  zfs-pool /dev/ad11 /dev/ad12  /dev/ad13
df | grep zfs-pool
zfs-pool       zfs    1.4T   18K  1.4T   1% /zfs-pool

links