Difference between revisions of "USB physical port mapping"

From Proxmox VE
Jump to navigation Jump to search
(cosmetic changes)
Line 1: Line 1:
Currently (Stable version of Proxmox is 1.9) it's possible to map hardware usb port in a following way:
+
== PVE version 2.x  ==
 +
 
 +
To map hardware usb port use the following instructions:
 +
 
 +
1. Find out physical port parameters (bus and port). On host run:
 +
 
 +
'''lsusb -t'''
 +
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
 +
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
 +
/: Bus 0'''3'''.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
 +
|__ Port '''1''': Dev 4, If 0, Class=vend., Driver=usbfs, 1.5M
 +
|__ Port 2: Dev 5, If 0, Class=vend., Driver=usbfs, 1.5M
 +
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
 +
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
 +
 
 +
2. Edit the VM config file and add the following entry:<br>
 +
 
 +
'''usb0: host=3-1'''
 +
 
 +
Which corresponds to Bus number 3 and Port number 1.
 +
 
 +
3. Power off/power on VM.
 +
 
 +
<br>
 +
 
 +
----
 +
 
 +
== PVE version 1.9  ==
 +
 
 +
To map hardware usb port use the following instructions:  
 +
 
 +
1. Find out physical port parameters (bus and port)
  
1. Find out physical port parameters (bus and port)
 
 
   qm monitor NNN
 
   qm monitor NNN
  qm> info usbhost
+
qm&gt; info usbhost
    '''Bus 3''', Addr 2, '''Port 1''', Speed 1.5 Mb/s
+
'''Bus 3''', Addr 2, '''Port 1''', Speed 1.5 Mb/s
      Vendor Specific: USB device 0529:0001, HASP 2.17
+
Vendor Specific: USB device 0529:0001, HASP 2.17
    Bus 5, Addr 3, Port 2, Speed 12 Mb/s
+
Bus 5, Addr 3, Port 2, Speed 12 Mb/s
      Class 00: USB device 0624:0248, USB Composite Device-0
+
Class 00: USB device 0624:0248, USB Composite Device-0
 +
 
 +
2. Add the device to the particular VM (/etc/qemu-server/NNN.conf)
  
2. Add the device to the particular VM (/etc/qemu-server/NNN.conf)
 
 
   args: -device usb-host,hostbus='''3''',hostport='''1'''
 
   args: -device usb-host,hostbus='''3''',hostport='''1'''
or (as Proxmox 2.x supports usbN in vm.conf)
+
 
 +
or (as Proxmox 2.x supports usbN in vm.conf)  
 +
 
 
   usb0: host='''3'''-'''1'''
 
   usb0: host='''3'''-'''1'''
  
3. Power off/power on VM and check
+
3. Power off/power on VM and check  
 +
 
 
   qm monitor NNN
 
   qm monitor NNN
  qm> info usb
+
qm&gt; info usb
    Device 0.2, Port 1, Speed 12 Mb/s, Product QEMU USB Tablet
+
Device 0.2, Port 1, Speed 12 Mb/s, Product QEMU USB Tablet
    Device 0.3, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
+
Device 0.3, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
    '''Device 0.4, Port 2.1, Speed 1.5 Mb/s, Product HASP 2.17'''
+
'''Device 0.4, Port 2.1, Speed 1.5 Mb/s, Product HASP 2.17'''
 +
 
 +
More information:
  
More information:
+
#[[Manual: vm.conf|man vm.conf]]  
# [[Manual:_vm.conf|man vm.conf]]
+
#http://www.kraxel.org/cgit/qemu/tree/docs/usb2.txt
# http://www.kraxel.org/cgit/qemu/tree/docs/usb2.txt
 

Revision as of 15:36, 20 December 2012

PVE version 2.x

To map hardware usb port use the following instructions:

1. Find out physical port parameters (bus and port). On host run:

lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=vend., Driver=usbfs, 1.5M
|__ Port 2: Dev 5, If 0, Class=vend., Driver=usbfs, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M 

2. Edit the VM config file and add the following entry:

usb0: host=3-1

Which corresponds to Bus number 3 and Port number 1.

3. Power off/power on VM.



PVE version 1.9

To map hardware usb port use the following instructions:

1. Find out physical port parameters (bus and port)

 qm monitor NNN
qm> info usbhost
Bus 3, Addr 2, Port 1, Speed 1.5 Mb/s
Vendor Specific: USB device 0529:0001, HASP 2.17
Bus 5, Addr 3, Port 2, Speed 12 Mb/s
Class 00: USB device 0624:0248, USB Composite Device-0

2. Add the device to the particular VM (/etc/qemu-server/NNN.conf)

 args: -device usb-host,hostbus=3,hostport=1

or (as Proxmox 2.x supports usbN in vm.conf)

 usb0: host=3-1

3. Power off/power on VM and check

 qm monitor NNN
qm> info usb
Device 0.2, Port 1, Speed 12 Mb/s, Product QEMU USB Tablet
Device 0.3, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
Device 0.4, Port 2.1, Speed 1.5 Mb/s, Product HASP 2.17

More information:

  1. man vm.conf
  2. http://www.kraxel.org/cgit/qemu/tree/docs/usb2.txt