Difference between revisions of "USB physical port mapping"

From Proxmox VE
Jump to navigation Jump to search
m
Line 5: Line 5:
 
=== Find out physical port parameters (bus and port) ===
 
=== Find out physical port parameters (bus and port) ===
  
From the host:
+
Through Qemu/KVM tool (simpler):
 +
'''qm monitor ''<VM_ID>'''''
 +
qm&gt; '''info usbhost'''
 +
  '''Bus 3''', Addr 2, '''Port 1''', Speed 1.5 Mb/s
 +
    Vendor Specific: USB device 0529:0001, HASP 2.17
 +
  Bus 5, Addr 3, Port 2, Speed 12 Mb/s
 +
    Class 00: USB device 0624:0248, USB Composite Device-0
 +
  Auto filters:
 +
    '''Bus 1''', Addr *, '''Port 1.3''', ID *:*
 +
 
 +
* Example 1: Bus 3, Port 1 => '''3-1'''
 +
* Example 2: Bus 1, Port 1.3 => '''1-1.3'''
 +
 
 +
Or from the host:
 
  '''lsusb -t'''
 
  '''lsusb -t'''
 
  /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
 
  /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
Line 20: Line 33:
 
* Example 1: Bus 3, Port 1 => '''3-1'''
 
* Example 1: Bus 3, Port 1 => '''3-1'''
 
* Example 2: Bus 1, Port 1, Port 3 => '''1-1.3'''
 
* Example 2: Bus 1, Port 1, Port 3 => '''1-1.3'''
 
Or through Qemu/KVM tool:
 
'''qm monitor ''<VM_ID>'''''
 
qm&gt; '''info usbhost'''
 
  '''Bus 3''', Addr 2, '''Port 1''', Speed 1.5 Mb/s
 
    Vendor Specific: USB device 0529:0001, HASP 2.17
 
  Bus 5, Addr 3, Port 2, Speed 12 Mb/s
 
    Class 00: USB device 0624:0248, USB Composite Device-0
 
  Auto filters:
 
    '''Bus 1''', Addr *, '''Port 1.3''', ID *:*
 
 
* Example 1: Bus 3, Port 1 => '''3-1'''
 
* Example 2: Bus 1, Port 1.3 => '''1-1.3'''
 
  
 
=== Add the device to the VM ===
 
=== Add the device to the VM ===

Revision as of 18:12, 28 May 2013

The main reason to use physical USB port mapping is to be able to connect several usb devices which have the same IDs to different virtual machines (device-1 to VM1, device-2 to VM2, etc).

Map hardware USB port

Find out physical port parameters (bus and port)

Through Qemu/KVM tool (simpler):

qm monitor <VM_ID>
qm> info usbhost
 Bus 3, Addr 2, Port 1, Speed 1.5 Mb/s
   Vendor Specific: USB device 0529:0001, HASP 2.17
 Bus 5, Addr 3, Port 2, Speed 12 Mb/s
   Class 00: USB device 0624:0248, USB Composite Device-0
 Auto filters:
   Bus 1, Addr *, Port 1.3, ID *:*
  • Example 1: Bus 3, Port 1 => 3-1
  • Example 2: Bus 1, Port 1.3 => 1-1.3

Or from the host:

lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 4, If 0, Class=vend., Driver=usbfs, 1.5M
    |__ Port 2: Dev 5, If 0, Class=vend., Driver=usbfs, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 3: Dev 5, If 0, Class=comm., Driver=usbfs, 480M
        |__ Port 3: Dev 5, If 1, Class=data, Driver=usbfs, 480M
  • Example 1: Bus 3, Port 1 => 3-1
  • Example 2: Bus 1, Port 1, Port 3 => 1-1.3

Add the device to the VM

Edit the VM's configuration file /etc/pve/qemu-server/<VM_ID>.conf and add this line:

  • Examples 1 & 2:
 usb0: host=3-1
 usb1: host=1-1.3

For Proxmox before version 1.9, try this line:

  • Example 1:
 args: -device usb-host,hostbus=3,hostport=1
  • Example 2:
 args: -device usb-host,hostbus=1,hostport=1.3

Stop and restart the VM

Stop and start the VM (a reboot is not enought).

Check that the USB devices are seen by the VM:

qm monitor <VM_ID>
qm> info usb
 Device 0.2, Port 1, Speed 12 Mb/s, Product QEMU USB Tablet
 Device 0.3, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
 Device 1.1, Port 1, Speed 1.5 Mb/s, Product HASP 2.17
 Device 1.0, Port 2, Speed 480 Mb/s, Product USB Host Device

References