ZFS: Tips and Tricks
- 1 Using ZFS Storage Plugin (via Proxmox VE GUI or shell)
- 2 Misc
- 3 Troubleshooting and known issues
- 4 Glossary
- 5 Further readings about ZFS
- 6 See also
Using ZFS Storage Plugin (via Proxmox VE GUI or shell)
After the ZFS pool has been created, you can add it with the Proxmox VE GUI or CLI.
Adding a ZFS storage via CLI
To create it by CLI use:
pvesm add zfspool <storage-ID> -pool <pool-name>
Adding a ZFS storage via Gui
To add it with the GUI: Go to the datacenter, add storage, select ZFS.
QEMU disk cache mode
If you get the warning:
qm start 4016 kvm: -drive file=/data/pve-storage/images/4016/vm-4016-disk-1.raw,if=none,id=drive-virtio1,aio=native,cache=none: could not open disk image /data/pve-storage/images/4016/vm-4016-disk-1.raw: Invalid argument
or a warning that the filesystem do not supporting O_DIRECT, set the disk cache type of your VM from none to writeback.
LXC with ACL on ZFS
ZFS uses as default store for ACL hidden files on filesystem. This reduces performance enormously and with several thousand files a system can feel unresponsive. Storing the xattr in the inode will revoke this performance issue.
Modification to do
zfs set xattr=sa dnodesize=auto vmstore/data
Warning: Do not set dnodesize on rpool because GRUB is not able to handle a different size. see Bug entry https://savannah.gnu.org/bugs/?func=detailitem&item_id=48885
Example configurations for running Proxmox VE with ZFS
Install on a high performance system
As of 2013 and later, high performance servers have 16-64 cores, 256GB-1TB RAM and potentially many 2.5" disks and/or a PCIe based SSD with half a million IOPS. High performance systems benefit from a number of custom settings, for example enabling compression typically improves performance.
- If you have a good number of disks keep organized by using aliases. Edit /etc/zfs/vdev_id.conf to prepare aliases for disk devices found in /dev/disk/by-id/ :
# run 'udevadm trigger' after updating this file alias a0 scsi-36848f690e856b10018cdf39854055206 alias b0 scsi-36848f690e856b10018cdf3ce573fdeb6 alias a1 scsi-36848f690e856b10018cdf40f5b277cbc alias b1 scsi-36848f690e856b10018cdf43a5db1b99b alias a2 scsi-36848f690e856b10018cdf4575f652ad0 alias b2 scsi-36848f690e856b10018cdf47761587cec
Use flash for caching/logs. If you have only one SSD, use parted of gdisk to create a small partition for the ZIL (ZFS intent log) and a larger one for the L2ARC (ZFS read cache on disk). Make sure that the ZIL is on the first partition. In our case we have a Express Flash PCIe SSD with 175GB capacity and setup a ZIL with 25GB and a L2ARC cache partition of 150GB.
- edit /etc/modprobe.d/zfs.conf to apply several tuning options for high performance servers:
# ZFS tuning for a proxmox machine that reserves 64GB for ZFS # # Don't let ZFS use less than 4GB and more than 64GB options zfs zfs_arc_min=4294967296 options zfs zfs_arc_max=68719476736 # # disabling prefetch is no longer required options zfs l2arc_noprefetch=0
- create a zpool of striped mirrors (equivalent to RAID10) with log device and cache and always enable compression:
zpool create -o compression=on -f tank mirror a0 b0 mirror a1 b1 mirror a2 b2 log /dev/rssda1 cache /dev/rssda2
- check the status of the newly created pool:
root@proxmox:/# zpool status pool: tank state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 a0 ONLINE 0 0 0 b0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 a1 ONLINE 0 0 0 b1 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 a2 ONLINE 0 0 0 b2 ONLINE 0 0 0 logs rssda1 ONLINE 0 0 0 cache rssda2 ONLINE 0 0 0 errors: No known data errors
Using PVE 2.3 on a 2013 high performance system with ZFS you can install Windows Server 2012 Datacenter Edition with GUI in just under 4 minutes.
Troubleshooting and known issues
ZFS packages are not installed
If you upgraded to 3.4 or later, zfsutils package is not installed. You can install it with apt:
apt-get install zfsutils zfs-initramfs
Grub boot ZFS problem
- Symptoms: stuck at boot with an blinking prompt.
- Reason: If you ZFS raid it could happen that your mainboard does not initial all your disks correctly and Grub will wait for all RAID disk members - and fails. It can happen with more than 2 disks in ZFS RAID configuration - we saw this on some boards with ZFS RAID-0/RAID-10
Boot fails and goes into busybox
If booting fails with something like
No pool imported. Manually import the root pool at the command prompt and then exit. Hint: try: zpool import -R /rpool -N rpool
is because zfs is invoked too soon (it has happen sometime when connecting a SSD for future ZIL configuration). To prevent it there have been some suggestions in the forum. Try to boot following the suggestions of busybox or searching the forum, and try ONE of the following:
a) edit /etc/default/grub and add "rootdelay=10" at GRUB_CMDLINE_LINUX_DEFAULT (i.e. GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=10 quiet") and then issue a # update-grub
b) edit /etc/default/zfs, set ZFS_INITRD_PRE_MOUNTROOT_SLEEP='4', and then issue a "update-initramfs -k 4.2.6-1-pve -u"
Snapshot of LXC on ZFS
If you can't create a snapshot of an LXC container on ZFS and you get following message:
INFO: rsync: set_acl: sys_acl_set_file(archiv, ACL_TYPE_DEFAULT): Operation not supported (95)
you can run following commands
zfs create -o mountpoint=/mnt/vztmp rpool/vztmp zfs set acltype=posixacl rpool/vztmp
Now set /mnt/vztmp in your /etc/vzdump.conf for tmp
Replacing a failed disk in the root pool
- ZPool is the logical unit of the underlying disks, what zfs use.
- ZVol is an emulated Block Device provided by ZFS
- ZIL is ZFS Intent Log, it is a small block device ZFS uses to write faster
- ARC is Adaptive Replacement Cache and located in Ram, its the Level 1 cache.
- L2ARC is Layer2 Adaptive Replacement Cache and should be on an fast device (like SSD).
Further readings about ZFS
- https://www.freebsd.org/doc/handbook/zfs.html (even if written for freebsd, of course, I found this doc is extremely clear even for less "techie" admins [note by m.ardito])
- https://pthree.org/2012/04/17/install-zfs-on-debian-gnulinux/ (and all other pages linked there)
and this has some very important information to know before implementing zfs on a production system.
Very well written manual pages
man zfs man zpool