[pve-devel] pve-kernel-2.6.32 :(squeeze-proxmox2): broadcom bnx2 firmware load error

[Dietmar Maurer]

Sure, I already done that. But I get compile error.

You mentioned a problem with the header files in an earlier post.

- Dietmar

> -----Original Message-----
> From: Alexandre DERUMIER [mailto:aderumier at odiso.com]
> Sent: Donnerstag, 25. August 2011 11:30
> To: Dietmar Maurer
> Cc: pve-devel at pve.proxmox.com
> Subject: Re: [pve-devel] pve-kernel-2.6.32 :(squeeze-proxmox2): broadcom bnx2
> firmware load error
> 
> --- Makefile    2011-08-25 11:26:08.329362186 +0200
> +++ /Makefile   2011-08-25 11:28:14.724116159 +0200
> @@ -40,8 +40,8 @@
>  IXGBEDIR=ixgbe-3.3.9
>  IXGBESRC=${IXGBEDIR}.tar.gz
> 
> -#BNX2DIR=netxtreme2-6.2.23
> -#BNX2SRC=${BNX2DIR}.tar.gz
> +BNX2DIR=netxtreme2-6.2.23
> +BNX2SRC=${BNX2DIR}.tar.gz
> 
>  ARECADIR=arcmsr.1.20.0X.15-110330
>  ARECASRC=${ARECADIR}.zip
> @@ -87,7 +87,7 @@
>         ./find-firmware.pl data/lib/modules/${KVNAME} >fwlist.tmp
>         mv fwlist.tmp $@
> 
> -data: .compile_mark ${KERNEL_CFG} arcmsr.ko aoe.ko e1000e.ko igb.ko
> ixgbe.ko
> +data: .compile_mark ${KERNEL_CFG} arcmsr.ko aoe.ko e1000e.ko igb.ko
> +ixgbe.ko bnx2.ko bnx2x.ko cnic.ko
>         rm -rf data tmp; mkdir -p tmp/lib/modules/${KVNAME}
>         mkdir tmp/boot
>         install -m 644 ${KERNEL_CFG} tmp/boot/config-${KVNAME} @@ -103,9
> +103,9 @@
>         # install latest ibg driver
>         install -m 644 igb.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/igb/
>         # install bnx2 and tg3 drivers
> -       #install -m 644 bnx2.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/
> -       #install -m 644 bnx2x.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/
> -       #install -m 644 cnic.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/
> +       install -m 644 bnx2.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/
> +       install -m 644 bnx2x.ko tmp/lib/modules/${KVNAME}/kernel/drivers/net/
> +       install -m 644 cnic.ko
> + tmp/lib/modules/${KVNAME}/kernel/drivers/net/
>         # install areca driver
>         install -m 644 arcmsr.ko
> tmp/lib/modules/${KVNAME}/kernel/drivers/scsi/arcmsr/
>         # remove firmware
> @@ -185,13 +185,13 @@
>         cd ${IXGBEDIR}/src; make CFLAGS_EXTRA="-DIXGBE_NO_LRO"
> BUILD_KERNEL=${KVNAME}
>         cp ${IXGBEDIR}/src/ixgbe.ko ixgbe.ko
> 
> -#bnx2.ko cnic.ko bnx2x.ko: ${BNX2SRC}
> -#      rm -rf ${BNX2DIR}
> -#      tar xf ${BNX2SRC}
> -#      mkdir -p /lib/modules/${KVNAME}
> -#      ln -sf ${TOP}/${KERNEL_SRC} /lib/modules/${KVNAME}/build
> -#      cd ${BNX2DIR}; make KVER=${KVNAME}
> -#      cp `find ${BNX2DIR} -name bnx2.ko -o -name cnic.ko -o -name bnx2x.ko` .
> +bnx2.ko cnic.ko bnx2x.ko: ${BNX2SRC}
> +       rm -rf ${BNX2DIR}
> +       tar xf ${BNX2SRC}
> +       mkdir -p /lib/modules/${KVNAME}
> +       ln -sf ${TOP}/${KERNEL_SRC} /lib/modules/${KVNAME}/build
> +       cd ${BNX2DIR}; make KVER=${KVNAME}
> +       cp `find ${BNX2DIR} -name bnx2.ko -o -name cnic.ko -o -name bnx2x.ko` .
> 
>  arcmsr.ko: ${ARECASRC}
>         rm -rf ${ARECADIR}
> 
> 
>