[pve-devel] new bridge code doesn't work with redhat kernel

Alexandre DERUMIER aderumier at odiso.com
Wed Feb 6 14:35:56 CET 2013


>> Maybe, I'll do test without bond.

Doesn't work without bond too :(


----- Mail original ----- 

De: "Alexandre DERUMIER" <aderumier at odiso.com> 
À: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
Cc: pve-devel at pve.proxmox.com 
Envoyé: Mercredi 6 Février 2013 14:22:08 
Objet: Re: [pve-devel] new bridge code doesn't work with redhat kernel 

>>Urgh... that's pretty sad. It was working fine my test. But maybe i 
>>didn't test everything. Could you desribe me how exactly you've done the 
>>test? 

simply start the vm with old code and new code. (I have reboot the host to be sure) 
can't ping the vm with new code. 

But it's work fine with kernel 3.7. 


>>I've no bond running - just plain eth => bridge. Maybe that's the 
>>important difference? 

Maybe, I'll do test without bond. 


It's really possible it's a kernel problem, because like I said it, a lot of work has been done in kernel around 2.6.39 on the vlan code. 


----- Mail original ----- 

De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: "Dietmar Maurer" <dietmar at proxmox.com>, pve-devel at pve.proxmox.com 
Envoyé: Mercredi 6 Février 2013 13:56:08 
Objet: Re: new bridge code doesn't work with redhat kernel 

Hi, 

Urgh... that's pretty sad. It was working fine my test. But maybe i 
didn't test everything. Could you desribe me how exactly you've done the 
test? 

I've no bond running - just plain eth => bridge. Maybe that's the 
important difference? 

Stefan 

Am 06.02.2013 09:47, schrieb Alexandre DERUMIER: 
> Hi, 
> I'm testing the new bridge code, and it doesn't work for me ! 
> 
> setup: bridge vmbr1, on top of bond0 
> guest vm (id 115) have an interface in vlan95 
> host kernel 2.6.32-18-pve 
> 
> 
> But it's working fine with 3.7 kernel 
> 
> 
> 
> Also I notice than we update the pve-common code, the old tagged network interface remain in bridge, 
> I don't known if it's can do network loop. (bond0.95 and vmbr1.95 in same bridge in my example) 
> 
> 
> 
> 
> old 
> -------------- 
> #brctl show 
> 
> vmbr1 8000.001aa03c98c5 no bond0 
> 
> vmbr1v95 8000.001aa03c98c5 no bond0.95 
> tap115i0 
> 
> 
> update to last pve-common, restart the vm 
> ------------------------------------------- 
> #qm stop 115 
> #qm start 115 
> #brctl show 
> 
> vmbr1 8000.001aa03c98c5 no bond0 
> vmbr1v95 8000.001aa03c98c5 no bond0.95 -->old bond0.95 always attached (don't known if it can cause network loop ?) 
> tap115i0 
> vmbr1.95 
> 
> 
> (I have also restart the server to have a clean bridge, doesn't work too) 
> 
> 
> 
> ----- Mail original ----- 
> 
> De: "Stefan Priebe" <s.priebe at profihost.ag> 
> À: "Dietmar Maurer" <dietmar at proxmox.com> 
> Cc: pve-devel at pve.proxmox.com 
> Envoyé: Lundi 28 Janvier 2013 17:45:27 
> Objet: Re: [pve-devel] [PATCH] pve-common: PVE/Network: rework of activate_bridge_vlan 
> 
> Thanks! 
> Am 28.01.2013 12:00, schrieb Dietmar Maurer: 
>> applied, thanks! 
>> 
>>> -----Original Message----- 
>>> From: pve-devel-bounces at pve.proxmox.com [mailto:pve-devel- 
>>> bounces at pve.proxmox.com] On Behalf Of Stefan Priebe 
>>> Sent: Freitag, 25. Jänner 2013 22:16 
>>> To: pve-devel at pve.proxmox.com 
>>> Subject: [pve-devel] [PATCH] pve-common: PVE/Network: rework of 
>>> activate_bridge_vlan 
>>> 
>>> - use ip command instead of old vconfig 
>>> - activate gvrp by default (it doesn't harm if the switch does not support it or 
>>> it is disabled) 
>>> - use bridge instead of raw ethernet device as vlan bridge 
>>> 
>>> Signed-off-by: Stefan Priebe <s.priebe at profihost.ag> 
>>> --- 
>>> data/PVE/Network.pm | 22 ++++------------------ 
>>> 1 file changed, 4 insertions(+), 18 deletions(-) 
>>> 
>>> diff --git a/data/PVE/Network.pm b/data/PVE/Network.pm index 
>>> 2c356eb..71045fe 100644 
>>> --- a/data/PVE/Network.pm 
>>> +++ b/data/PVE/Network.pm 
>>> @@ -72,28 +72,14 @@ sub activate_bridge_vlan { 
>>> die "got strange vlan tag '$tag_param'\n" if $tag < 1 || $tag > 4094; 
>>> 
>>> my $bridgevlan = "${bridge}v$tag"; 
>>> - 
>>> - my $dir = "/sys/class/net/$bridge/brif"; 
>>> - 
>>> - #check if we have an only one ethX or bondX interface in the bridge 
>>> - 
>>> - my $iface; 
>>> - PVE::Tools::dir_glob_foreach($dir, '((eth|bond)\d+)', sub { 
>>> - my ($slave) = @_; 
>>> - 
>>> - die "more then one physical interfaces on bridge '$bridge'\n" if 
>>> $iface; 
>>> - $iface = $slave; 
>>> - 
>>> - }); 
>>> - 
>>> - die "no physical interface on bridge '$bridge'\n" if !$iface; 
>>> - 
>>> + my $iface = $bridge; 
>>> my $ifacevlan = "${iface}.$tag"; 
>>> + my $vlanflags = "reorder_hdr on gvrp on"; 
>>> 
>>> # create vlan on $iface is not already exist 
>>> if (! -d "/sys/class/net/$ifacevlan") { 
>>> - system("/sbin/vconfig add $iface $tag") == 0 || 
>>> - die "can't add vlan tag $tag to interface $iface\n"; 
>>> + system("/sbin/ip link add link $iface name $ifacevlan type vlan id $tag 
>>> $vlanflags") == 0 || 
>>> + die "can't add vlan tag $tag to interface $iface\n"; 
>>> } 
>>> 
>>> # be sure to have the $ifacevlan up 
>>> -- 
>>> 1.7.10.4 
>>> 
>>> _______________________________________________ 
>>> pve-devel mailing list 
>>> pve-devel at pve.proxmox.com 
>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>> 
>> 
> _______________________________________________ 
> pve-devel mailing list 
> pve-devel at pve.proxmox.com 
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
> 
_______________________________________________ 
pve-devel mailing list 
pve-devel at pve.proxmox.com 
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 



More information about the pve-devel mailing list