[pve-devel] new bridge code doesn't work with redhat kernel

Alexandre DERUMIER aderumier at odiso.com
Thu Feb 7 11:25:16 CET 2013


>>yes while rechecking the code i saw the same. But then GVRP does not 
>>work. The relevant packet does not leave the network interface. So maybe 
>>it's a vanilla kernel bug? Right now i've no more ideas how / what to test. 

so, GVRP doesn't work when vlan are defined on interfaces or bond with redhat kernel and vanilla kernel ?

gvrp seem available on redhat kernel 
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y



----- Mail original ----- 

De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: pve-devel at pve.proxmox.com 
Envoyé: Jeudi 7 Février 2013 11:10:42 
Objet: Re: [pve-devel] new bridge code doesn't work with redhat kernel 

Hi, 

yes while rechecking the code i saw the same. But then GVRP does not 
work. The relevant packet does not leave the network interface. So maybe 
it's a vanilla kernel bug? Right now i've no more ideas how / what to test. 

Greets, 
Stefan 
Am 07.02.2013 10:59, schrieb Alexandre DERUMIER: 
>>> Right now I'm not sure how it works under PVE. I've to recheck the code. 
> 
> It's work like redhat 
> 
> eth0 ---vmbrx 
> eth0 -- eth0.10 --- vmbrxV10 
> 
> eth0 --bond0 -- bond0.10 --- vmbrxV10 
> eth1 -| 
> 
> ----- Mail original ----- 
> 
> De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
> À: "Alexandre DERUMIER" <aderumier at odiso.com> 
> Cc: pve-devel at pve.proxmox.com 
> Envoyé: Jeudi 7 Février 2013 10:12:14 
> Objet: Re: [pve-devel] new bridge code doesn't work with redhat kernel 
> 
> Hi, 
> 
> oh i think it's clear. 
> 
> They put the vlan on top of the bond and then the bridge on top of the vlan. 
> 
> without a bond they add the vlan on top of the nic and then on top of 
> the vlan the bridge. 
> 
> Right now I'm not sure how it works under PVE. I've to recheck the code. 
> 
> Stefan 
> Am 06.02.2013 16:15, schrieb Alexandre DERUMIER: 
>>>> mhm strange i was sure that i've tested it with latest proxmox kernel. 
>>>> Will retest. Didn't redhat backport all those changes done in vanilla? 
>> 
>> Not all new features are backported. (I think we need to wait for rhel7 to have a big jump in kernel version) 
>> 
>> 
>>>> mean what's the correct workflow under redhat to use bond + bridge + vlan. 
>> 
>> here the ovirt (and rhev) network setup 
>> 
>> http://www.ovirt.org/Vdsm_Network 
>> 
>> But it's not clear if they put vlan on bridge or on interface. 
>> 
>> ----- Mail original ----- 
>> 
>> De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
>> À: "Alexandre DERUMIER" <aderumier at odiso.com> 
>> Cc: pve-devel at pve.proxmox.com 
>> Envoyé: Mercredi 6 Février 2013 14:48:11 
>> Objet: Re: [pve-devel] new bridge code doesn't work with redhat kernel 
>> 
>> Hio, 
>> 
>> mhm strange i was sure that i've tested it with latest proxmox kernel. 
>> Will retest. Didn't redhat backport all those changes done in vanilla? I 
>> mean what's the correct workflow under redhat to use bond + bridge + vlan. 
>> 
>> Stefan 
>> 
>> Am 06.02.2013 14:35, schrieb Alexandre DERUMIER: 
>>>>> Maybe, I'll do test without bond. 
>>> 
>>> Doesn't work without bond too :( 
>>> 
>>> 
>>> ----- Mail original ----- 
>>> 
>>> De: "Alexandre DERUMIER" <aderumier at odiso.com> 
>>> À: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
>>> Cc: pve-devel at pve.proxmox.com 
>>> Envoyé: Mercredi 6 Février 2013 14:22:08 
>>> Objet: Re: [pve-devel] new bridge code doesn't work with redhat kernel 
>>> 
>>>>> Urgh... that's pretty sad. It was working fine my test. But maybe i 
>>>>> didn't test everything. Could you desribe me how exactly you've done the 
>>>>> test? 
>>> 
>>> simply start the vm with old code and new code. (I have reboot the host to be sure) 
>>> can't ping the vm with new code. 
>>> 
>>> But it's work fine with kernel 3.7. 
>>> 
>>> 
>>>>> I've no bond running - just plain eth => bridge. Maybe that's the 
>>>>> important difference? 
>>> 
>>> Maybe, I'll do test without bond. 
>>> 
>>> 
>>> It's really possible it's a kernel problem, because like I said it, a lot of work has been done in kernel around 2.6.39 on the vlan code. 
>>> 
>>> 
>>> ----- Mail original ----- 
>>> 
>>> De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
>>> À: "Alexandre DERUMIER" <aderumier at odiso.com> 
>>> Cc: "Dietmar Maurer" <dietmar at proxmox.com>, pve-devel at pve.proxmox.com 
>>> Envoyé: Mercredi 6 Février 2013 13:56:08 
>>> Objet: Re: new bridge code doesn't work with redhat kernel 
>>> 
>>> Hi, 
>>> 
>>> Urgh... that's pretty sad. It was working fine my test. But maybe i 
>>> didn't test everything. Could you desribe me how exactly you've done the 
>>> test? 
>>> 
>>> I've no bond running - just plain eth => bridge. Maybe that's the 
>>> important difference? 
>>> 
>>> Stefan 
>>> 
>>> Am 06.02.2013 09:47, schrieb Alexandre DERUMIER: 
>>>> Hi, 
>>>> I'm testing the new bridge code, and it doesn't work for me ! 
>>>> 
>>>> setup: bridge vmbr1, on top of bond0 
>>>> guest vm (id 115) have an interface in vlan95 
>>>> host kernel 2.6.32-18-pve 
>>>> 
>>>> 
>>>> But it's working fine with 3.7 kernel 
>>>> 
>>>> 
>>>> 
>>>> Also I notice than we update the pve-common code, the old tagged network interface remain in bridge, 
>>>> I don't known if it's can do network loop. (bond0.95 and vmbr1.95 in same bridge in my example) 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> old 
>>>> -------------- 
>>>> #brctl show 
>>>> 
>>>> vmbr1 8000.001aa03c98c5 no bond0 
>>>> 
>>>> vmbr1v95 8000.001aa03c98c5 no bond0.95 
>>>> tap115i0 
>>>> 
>>>> 
>>>> update to last pve-common, restart the vm 
>>>> ------------------------------------------- 
>>>> #qm stop 115 
>>>> #qm start 115 
>>>> #brctl show 
>>>> 
>>>> vmbr1 8000.001aa03c98c5 no bond0 
>>>> vmbr1v95 8000.001aa03c98c5 no bond0.95 -->old bond0.95 always attached (don't known if it can cause network loop ?) 
>>>> tap115i0 
>>>> vmbr1.95 
>>>> 
>>>> 
>>>> (I have also restart the server to have a clean bridge, doesn't work too) 
>>>> 
>>>> 
>>>> 
>>>> ----- Mail original ----- 
>>>> 
>>>> De: "Stefan Priebe" <s.priebe at profihost.ag> 
>>>> À: "Dietmar Maurer" <dietmar at proxmox.com> 
>>>> Cc: pve-devel at pve.proxmox.com 
>>>> Envoyé: Lundi 28 Janvier 2013 17:45:27 
>>>> Objet: Re: [pve-devel] [PATCH] pve-common: PVE/Network: rework of activate_bridge_vlan 
>>>> 
>>>> Thanks! 
>>>> Am 28.01.2013 12:00, schrieb Dietmar Maurer: 
>>>>> applied, thanks! 
>>>>> 
>>>>>> -----Original Message----- 
>>>>>> From: pve-devel-bounces at pve.proxmox.com [mailto:pve-devel- 
>>>>>> bounces at pve.proxmox.com] On Behalf Of Stefan Priebe 
>>>>>> Sent: Freitag, 25. Jänner 2013 22:16 
>>>>>> To: pve-devel at pve.proxmox.com 
>>>>>> Subject: [pve-devel] [PATCH] pve-common: PVE/Network: rework of 
>>>>>> activate_bridge_vlan 
>>>>>> 
>>>>>> - use ip command instead of old vconfig 
>>>>>> - activate gvrp by default (it doesn't harm if the switch does not support it or 
>>>>>> it is disabled) 
>>>>>> - use bridge instead of raw ethernet device as vlan bridge 
>>>>>> 
>>>>>> Signed-off-by: Stefan Priebe <s.priebe at profihost.ag> 
>>>>>> --- 
>>>>>> data/PVE/Network.pm | 22 ++++------------------ 
>>>>>> 1 file changed, 4 insertions(+), 18 deletions(-) 
>>>>>> 
>>>>>> diff --git a/data/PVE/Network.pm b/data/PVE/Network.pm index 
>>>>>> 2c356eb..71045fe 100644 
>>>>>> --- a/data/PVE/Network.pm 
>>>>>> +++ b/data/PVE/Network.pm 
>>>>>> @@ -72,28 +72,14 @@ sub activate_bridge_vlan { 
>>>>>> die "got strange vlan tag '$tag_param'\n" if $tag < 1 || $tag > 4094; 
>>>>>> 
>>>>>> my $bridgevlan = "${bridge}v$tag"; 
>>>>>> - 
>>>>>> - my $dir = "/sys/class/net/$bridge/brif"; 
>>>>>> - 
>>>>>> - #check if we have an only one ethX or bondX interface in the bridge 
>>>>>> - 
>>>>>> - my $iface; 
>>>>>> - PVE::Tools::dir_glob_foreach($dir, '((eth|bond)\d+)', sub { 
>>>>>> - my ($slave) = @_; 
>>>>>> - 
>>>>>> - die "more then one physical interfaces on bridge '$bridge'\n" if 
>>>>>> $iface; 
>>>>>> - $iface = $slave; 
>>>>>> - 
>>>>>> - }); 
>>>>>> - 
>>>>>> - die "no physical interface on bridge '$bridge'\n" if !$iface; 
>>>>>> - 
>>>>>> + my $iface = $bridge; 
>>>>>> my $ifacevlan = "${iface}.$tag"; 
>>>>>> + my $vlanflags = "reorder_hdr on gvrp on"; 
>>>>>> 
>>>>>> # create vlan on $iface is not already exist 
>>>>>> if (! -d "/sys/class/net/$ifacevlan") { 
>>>>>> - system("/sbin/vconfig add $iface $tag") == 0 || 
>>>>>> - die "can't add vlan tag $tag to interface $iface\n"; 
>>>>>> + system("/sbin/ip link add link $iface name $ifacevlan type vlan id $tag 
>>>>>> $vlanflags") == 0 || 
>>>>>> + die "can't add vlan tag $tag to interface $iface\n"; 
>>>>>> } 
>>>>>> 
>>>>>> # be sure to have the $ifacevlan up 
>>>>>> -- 
>>>>>> 1.7.10.4 
>>>>>> 
>>>>>> _______________________________________________ 
>>>>>> pve-devel mailing list 
>>>>>> pve-devel at pve.proxmox.com 
>>>>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>>>>> 
>>>>> 
>>>> _______________________________________________ 
>>>> pve-devel mailing list 
>>>> pve-devel at pve.proxmox.com 
>>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>>>> 
>>> _______________________________________________ 
>>> pve-devel mailing list 
>>> pve-devel at pve.proxmox.com 
>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>>> 



More information about the pve-devel mailing list