[pve-devel] using a vlan on host and guest

Pablo Ruiz pablo.ruiz at gmail.com
Thu Apr 24 22:04:51 CEST 2014


Setup vmbr0.102 as host interface instead of bond0.102.

Sent from my iPhone

> On 24 Apr 2014, at 21:59, Stefan Priebe <s.priebe at profihost.ag> wrote:
> 
> Hi,
> 
> I've the following config on my host:
> auto bond0
> iface bond0 inet manual
>        slaves eth0 eth1 eth2
>        bond_mode 802.3ad
> 
> auto vmbr0
> iface vmbr0 inet manual
>        bridge_ports bond0
>        bridge_stp off
>        bridge_fd 0
> 
> auto bond0.102
> iface bond0.102 inet static
>        address 10.255.255.10
>        netmask 255.255.255.0
>        gateway 10.255.255.1
> 
> this works fine as long as i start no vm which has vlan 102 too.
> 
> Is this a bug in the PVE network code or my fault?
> 
> Greets,
> Stefan
> _______________________________________________
> pve-devel mailing list
> pve-devel at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel


More information about the pve-devel mailing list