[pve-devel] using a vlan on host and guest

Stefan Priebe s.priebe at profihost.ag
Thu Apr 24 22:07:17 CEST 2014


Am 24.04.2014 22:04, schrieb Pablo Ruiz:
> Setup vmbr0.102 as host interface instead of bond0.102.

Already tried this but at least with a 3.10 kernel it does not work. I 
then simply can't reach the target network. As the 102 tagged packages 
gets dropped at the bond.

Stefan

> Sent from my iPhone
>
>> On 24 Apr 2014, at 21:59, Stefan Priebe <s.priebe at profihost.ag> wrote:
>>
>> Hi,
>>
>> I've the following config on my host:
>> auto bond0
>> iface bond0 inet manual
>>         slaves eth0 eth1 eth2
>>         bond_mode 802.3ad
>>
>> auto vmbr0
>> iface vmbr0 inet manual
>>         bridge_ports bond0
>>         bridge_stp off
>>         bridge_fd 0
>>
>> auto bond0.102
>> iface bond0.102 inet static
>>         address 10.255.255.10
>>         netmask 255.255.255.0
>>         gateway 10.255.255.1
>>
>> this works fine as long as i start no vm which has vlan 102 too.
>>
>> Is this a bug in the PVE network code or my fault?
>>
>> Greets,
>> Stefan
>> _______________________________________________
>> pve-devel mailing list
>> pve-devel at pve.proxmox.com
>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel


More information about the pve-devel mailing list