[pve-devel] using a vlan on host and guest
aderumier at odiso.com
Fri Apr 25 07:48:16 CEST 2014
>>Already tried this but at least with a 3.10 kernel it does not work. I
>>then simply can't reach the target network. As the 102 tagged packages
>>gets dropped at the bond.
Yes, it's a known bug.
Seem than tagging on interface override tags coming from the vms.
I have found a working solution (for 3.10 kernel) with using tagged veth interface (see my other discussion about firewall-network model),
I'll send patch todays for test
----- Mail original -----
De: "Stefan Priebe" <s.priebe at profihost.ag>
À: "Pablo Ruiz" <pablo.ruiz at gmail.com>
Cc: pve-devel at pve.proxmox.com
Envoyé: Jeudi 24 Avril 2014 22:07:17
Objet: Re: [pve-devel] using a vlan on host and guest
Am 24.04.2014 22:04, schrieb Pablo Ruiz:
> Setup vmbr0.102 as host interface instead of bond0.102.
Already tried this but at least with a 3.10 kernel it does not work. I
then simply can't reach the target network. As the 102 tagged packages
gets dropped at the bond.
> Sent from my iPhone
>> On 24 Apr 2014, at 21:59, Stefan Priebe <s.priebe at profihost.ag> wrote:
>> I've the following config on my host:
>> auto bond0
>> iface bond0 inet manual
>> slaves eth0 eth1 eth2
>> bond_mode 802.3ad
>> auto vmbr0
>> iface vmbr0 inet manual
>> bridge_ports bond0
>> bridge_stp off
>> bridge_fd 0
>> auto bond0.102
>> iface bond0.102 inet static
>> address 10.255.255.10
>> netmask 255.255.255.0
>> gateway 10.255.255.1
>> this works fine as long as i start no vm which has vlan 102 too.
>> Is this a bug in the PVE network code or my fault?
>> pve-devel mailing list
>> pve-devel at pve.proxmox.com
pve-devel mailing list
pve-devel at pve.proxmox.com
More information about the pve-devel