[pve-devel] bridge vlan range, kernel 4.1 : "message truncated" warning when too much vlans defined

[Alexandre DERUMIER]

Hi, 

I'm currently testing vlan range on bridge filtering with kernel 4.1. 


If I defined too much vlans, or too big vlan range, 
I have a warning "message truncated", even if I'm using "-c" 


# bridge -c vlan 
Message truncated 
port vlan ids 
eth2 1 PVID Egress Untagged 

bond0 1 PVID Egress Untagged 
2-1850 

vmbr0 1 PVID Egress Untagged 
94 


or 
# bridge -c vlan 
Message truncated 
port vlan ids 
eth2 1 PVID Egress Untagged 
2-900 
bond0 1 PVID Egress Untagged 
2-900 

vmbr0 1 PVID Egress Untagged 
94 



Also, more important, this is also impact "ip", and truncate the output 

#ip link 

Message truncated 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 
2: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 9000 qdisc pfifo_fast master vmbr1 state DOWN mode DEFAULT group default qlen 1000 
link/ether 00:15:17:80:29:e6 brd ff:ff:ff:ff:ff:ff 
3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 
link/ether 00:15:17:80:29:e7 brd ff:ff:ff:ff:ff:ff 
4: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 
link/ether 00:1a:a0:3c:98:c5 brd ff:ff:ff:ff:ff:ff 
5: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast master ovs-system state UP mode DEFAULT group default qlen 1000 
link/ether 68:05:ca:09:c3:7c brd ff:ff:ff:ff:ff:ff 
6: eth4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast master ovs-system state UP mode DEFAULT group default qlen 1000 
link/ether 68:05:ca:09:c3:7d brd ff:ff:ff:ff:ff:ff 
7: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 
link/ether 00:1a:a0:3c:98:c5 brd ff:ff:ff:ff:ff:ff 
8: ovs-system at NONE: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default 
link/ether 7e:dd:5d:ea:ef:26 brd ff:ff:ff:ff:ff:ff 
9: vmbr10 at NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc noqueue state UNKNOWN mode DEFAULT group default 
link/ether 68:05:ca:09:c3:7d brd ff:ff:ff:ff:ff:ff 
10: bond1 at NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc noqueue state UNKNOWN mode DEFAULT group default 
link/ether 8a:c3:da:b0:9d:87 brd ff:ff:ff:ff:ff:ff 
11: bond0 at NONE: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP mode DEFAULT group default 
link/ether 00:1a:a0:3c:98:c5 brd ff:ff:ff:ff:ff:ff 
12: vmbr0 at NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default 
link/ether 00:1a:a0:3c:98:c5 brd ff:ff:ff:ff:ff:ff 
13: vmbr0.94 at vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default 
link/ether 00:1a:a0:3c:98:c5 brd ff:ff:ff:ff:ff:ff 

---->should have more interfaces here 


Is it a known bug ? 



Regards, 

Alexandre Derumier