[pve-devel] [PATCH v3 pve-common 5/5] Inotify : add mtu option

Alexandre Derumier aderumier at odiso.com
Thu Jul 5 02:56:34 CEST 2018


also check if mtu value is lower than parent interface

fixme: vxlan interface should be 50bytes lower than outgoing interface
       we need to find which interface is used (unicast/multicast/frr)
---
 src/PVE/INotify.pm                              | 22 ++++++++++++++++++++++
 test/etc_network_interfaces/t.create_network.pl | 10 ++++++++++
 2 files changed, 32 insertions(+)

diff --git a/src/PVE/INotify.pm b/src/PVE/INotify.pm
index f0f3144..5dd08c2 100644
--- a/src/PVE/INotify.pm
+++ b/src/PVE/INotify.pm
@@ -753,6 +753,20 @@ my $extract_ovs_option = sub {
     return $v;
 };
 
+my $check_mtu = sub {
+   my ($ifaces, $parent, $child) = @_;
+
+   die "check mtu : missing parent interface\n" if !$parent;
+   die "check mtu : missing child interface\n" if !$child;
+ 
+   my $pmtu = $ifaces->{$parent}->{mtu} ? $ifaces->{$parent}->{mtu} : 1500;
+   my $cmtu = $ifaces->{$child}->{mtu} ? $ifaces->{$child}->{mtu} : 1500;
+
+   die "interface '$parent' - mtu $pmtu is bigger than '$child' - mtu $cmtu\n"
+                    if $pmtu gt $cmtu;
+
+};
+
 # config => {
 #   ifaces => {
 #     $ifname => {
@@ -874,6 +888,7 @@ sub __read_etc_network_interfaces {
 		    $id = $options_alternatives->{$id} if $options_alternatives->{$id};
 
 		    my $simple_options = {
+			'mtu' => 1,
 			'ovs_type' => 1,
 			'ovs_options' => 1,
 			'ovs_bridge' => 1,
@@ -1301,6 +1316,8 @@ sub __write_etc_network_interfaces {
 		} else {
 		    die "interface '$p' is not defined as OVS port/bond\n";
 		}
+
+		&$check_mtu($ifaces, $iface, $p);
 	    }
 	}
     }
@@ -1315,6 +1332,7 @@ sub __write_etc_network_interfaces {
 		    if !$n;
 		die "OVS bond '$iface' - wrong interface type on slave '$p' " .
 		    "('$n->{type}' != 'eth')\n" if $n->{type} ne 'eth';
+		&$check_mtu($ifaces, $iface, $p);
 	    }
 	}
     }
@@ -1330,6 +1348,7 @@ sub __write_etc_network_interfaces {
 		    if !$n;
 		die "bond '$iface' - wrong interface type on slave '$p' " .
 		    "('$n->{type}' != 'eth')\n" if $n->{type} ne 'eth';
+		&$check_mtu($ifaces, $iface, $p);
 	    }
 	}
     }
@@ -1356,6 +1375,7 @@ sub __write_etc_network_interfaces {
 	if (defined($d->{'vxlan-svcnodeip'}) != defined($d->{'vxlan-physdev'})) {
 	    die "iface $iface : vxlan-svcnodeip and vxlan-physdev must be define together\n";
 	}
+	#fixme : check if vxlan mtu is lower than 50bytes than physical interface where tunnel is going out
     }
 
     # check vlan
@@ -1374,6 +1394,7 @@ sub __write_etc_network_interfaces {
 		die "vlan '$iface' - wrong interface type on parent '$p' " .
 		    "('$n->{type}' != 'eth|bond|bridge' )\n";
 	    }
+	    &$check_mtu($ifaces, $iface, $p);
 	}
     }
 
@@ -1387,6 +1408,7 @@ sub __write_etc_network_interfaces {
 		my $n = $ifaces->{$p};
 		die "bridge '$iface' - unable to find bridge port '$p'\n"
 		    if !$n;
+		&$check_mtu($ifaces, $iface, $p);
 		$bridgeports->{$p} = $iface;
 	    }
 	    $bridges->{$iface} = $d;
diff --git a/test/etc_network_interfaces/t.create_network.pl b/test/etc_network_interfaces/t.create_network.pl
index fda7237..8f4974a 100644
--- a/test/etc_network_interfaces/t.create_network.pl
+++ b/test/etc_network_interfaces/t.create_network.pl
@@ -40,6 +40,7 @@ $config->{ifaces}->{eth3} = {
 
 $config->{ifaces}->{bond0} = {
     type => 'bond',
+    mtu => 1400,
     slaves => 'eth2 eth3',
     bond_mode => '802.3ad',
     bond_xmit_hash_policy => 'layer3+4',
@@ -50,6 +51,7 @@ $config->{ifaces}->{bond0} = {
 };
 
 $config->{ifaces}->{vmbr1} = {
+    mtu => 1400,
     type => 'bridge',
     method => 'manual',
     families => ['inet'],
@@ -117,6 +119,7 @@ $config->{ifaces}->{vxlan3} = {
 
 $config->{ifaces}->{'vmbr1.100'} = {
     type => 'vlan',
+    mtu => 1300,
     method => 'manual',
     families => ['inet'],
     autostart => 1
@@ -124,6 +127,7 @@ $config->{ifaces}->{'vmbr1.100'} = {
 
 $config->{ifaces}->{'bond0.100'} = {
     type => 'vlan',
+    mtu => 1300,
     method => 'manual',
     families => ['inet'],
     autostart => 1
@@ -131,6 +135,7 @@ $config->{ifaces}->{'bond0.100'} = {
 
 $config->{ifaces}->{'eth1.100'} = {
     type => 'vlan',
+    mtu => 1400,
     method => 'manual',
     families => ['inet'],
     autostart => 1
@@ -155,6 +160,7 @@ iface eth3 inet manual
 
 auto eth1.100
 iface eth1.100 inet manual
+	mtu 1400
 
 auto bond0
 iface bond0 inet manual
@@ -162,9 +168,11 @@ iface bond0 inet manual
 	bond-miimon 100
 	bond-mode 802.3ad
 	bond-xmit-hash-policy layer3+4
+	mtu 1400
 
 auto bond0.100
 iface bond0.100 inet manual
+	mtu 1300
 
 auto vmbr0
 iface vmbr0 inet static
@@ -182,6 +190,7 @@ iface vmbr1 inet manual
 	bridge-fd 0
 	bridge-vlan-aware yes
 	bridge-vids 2-4094
+	mtu 1400
 
 auto vmbr2
 iface vmbr2 inet manual
@@ -199,6 +208,7 @@ iface vmbr3 inet manual
 
 auto vmbr1.100
 iface vmbr1.100 inet manual
+	mtu 1300
 
 auto vxlan1
 iface vxlan1 inet manual
-- 
2.11.0




More information about the pve-devel mailing list