[pve-devel] [RFC container 2/3] add feature flags using apparmor profile generation

Thomas Lamprecht t.lamprecht at proxmox.com
Wed Sep 19 09:42:30 CEST 2018


On 7/31/18 2:49 PM, Wolfgang Bumiller wrote:
> Signed-off-by: Wolfgang Bumiller <w.bumiller at proxmox.com>
> ---
>  debian/control        |   2 +-
>  src/PVE/LXC.pm        | 101 +++++++++++++++++++++++++++++++++++++++++++++++++-
>  src/PVE/LXC/Config.pm |  53 ++++++++++++++++++++++++++
>  3 files changed, 153 insertions(+), 3 deletions(-)
> 
> diff --git a/debian/control b/debian/control
> index 7fbea8d..b3491c9 100644
> --- a/debian/control
> +++ b/debian/control
> @@ -7,7 +7,7 @@ Build-Depends: debhelper (>= 7.0.50~),
>                 libpve-guest-common-perl | libpve-common-perl (<= 4.0-89),
>                 libpve-storage-perl,
>                 libtest-mockmodule-perl,
> -               lxc (>= 2.1.0-1) | lxc-pve (>= 2.1.0-1),
> +               lxc (>= 3.0.2-1) | lxc-pve (>= 3.0.1+pve1-1),
>                 pve-cluster (>= 4.0-8),
>                 pve-doc-generator,
>  Standards-Version: 3.8.4
> diff --git a/src/PVE/LXC.pm b/src/PVE/LXC.pm
> index bc03792..46222ba 100644
> --- a/src/PVE/LXC.pm
> +++ b/src/PVE/LXC.pm
> @@ -27,6 +27,8 @@ use PVE::Syscall;
>  use PVE::LXC::Config;
>  use Time::HiRes qw (gettimeofday);
>  
> +my $LXC_CONFIG_PATH = '/usr/share/lxc/config';
> +
>  my $nodename = PVE::INotify::nodename();
>  
>  my $cpuinfo= PVE::ProcFSTools::read_cpuinfo();
> @@ -368,6 +370,94 @@ sub get_cgroup_subsystems {
>  	return wantarray ? ($v1, $v2) : $v1;
>  }
>  
> +# Currently we do not need to create seccomp profile 'files' as the only
> +# choice our configuration actually allows is "with or without keyctl()",
> +# so we distinguish between using lxc's "default" seccomp profile and our
> +# added pve-userns.seccomp file.
> +#
> +# This returns a configuration line added to the raw lxc config.
> +sub make_seccomp_config {
> +    my ($conf, $unprivileged, $features) = @_;
> +    # User-configured profile has precedence, note that the user's entry would
> +    # be written 'after' this line anyway...
> +    if (PVE::LXC::Config->has_lxc_entry($conf, 'lxc.seccomp.profile')) {
> +	# Warn the user if this conflicts with a feature:
> +	if ($features->{keyctl}) {
> +	    warn "explicitly configured lxc.seccomp.profile overrides the following settings: features:keyctl\n";
> +	}
> +	return '';
> +    }
> +
> +    # Privileged containers keep using the default (which is already part of
> +    # the files included via lxc.include, so we don't need to write it out,
> +    # that way it stays admin-configurable via /usr/share/lxc/config/... as
> +    # well)
> +    return '' if !$unprivileged;
> +
> +    # Unprivileged containers will get keyctl() disabled by default as a
> +    # workaround for systemd-networkd behavior. But we have an option to
> +    # explicitly enable it:
> +    return '' if $features->{keyctl};
> +
> +    # Finally we're in an unprivileged container without `keyctl` set
> +    # explicitly. We have a file prepared for this:
> +    return "lxc.seccomp.profile = $LXC_CONFIG_PATH/pve-userns.seccomp\n";
> +}
> +
> +# Since lxc-3.0.2 we can have lxc generate a profile for the container
> +# automatically. The default should be equivalent to the old
> +# `lxc-container-default-cgns` profile.
> +#
> +# Additionally this also added `lxc.apparmor.raw` which can be used to inject
> +# additional lines into the profile. We can use that to allow mounting specific
> +# file systems.
> +sub make_apparmor_config {
> +    my ($conf, $unprivileged, $features) = @_;
> +
> +    # user-configured profile has precedence, but first we go through our own
> +    # code to figure out whether we should warn the user:
> +
> +    my $raw = "lxc.apparmor.profile = generated\n";
> +    my @profile_uses;
> +
> +    # There's lxc.apparmor.allow_nesting now, which will add the necessary
> +    # apparmor lines, create an apparmor namespace for the container, but also
> +    # adds proc and sysfs mounts to /dev/.lxc/{proc,sys}. These do not have
> +    # lxcfs mounted over them, because that would prevent the container from
> +    # mounting new instances of them for nested containers.
> +    if ($features->{nesting}) {
> +	push @profile_uses, 'features:nesting';
> +	$raw .= "lxc.apparmor.allow_nesting = 1\n"
> +    } else {
> +	# In the default profile in /etc/apparmor.d we patch this in because
> +	# otherwise a container can for example run `chown` on /sys, breaking
> +	# access to it for non-CAP_DAC_OVERRIDE tools on the host:
> +	$raw .= "lxc.apparmor.raw = deny mount -> /proc/,\n";
> +	$raw .= "lxc.apparmor.raw = deny mount -> /sys/,\n";
> +	# Preferably we could use the 'remount' flag but this does not sit well
> +	# with apparmor_parser currently:
> +	#  mount options=(rw, nosuid, nodev, noexec, remount) -> /sys/,
> +    }
> +
> +    if (my $mount = $features->{mount}) {
> +	push @profile_uses, 'features:mount';
> +	foreach my $fs (PVE::Tools::split_list($mount)) {
> +	    $raw .= "lxc.apparmor.raw = mount fstype=$fs,\n";
> +	}
> +    }
> +
> +    # More to come?
> +
> +    if (PVE::LXC::Config->has_lxc_entry($conf, 'lxc.apparmor.profile')) {
> +	if (length(my $used = join(', ', @profile_uses))) {
> +	    warn "explicitly configured lxc.apparmor.profile overrides the following settings: $used\n";
> +	}
> +	return '';
> +    }
> +
> +    return $raw;
> +}
> +
>  sub update_lxc_config {
>      my ($vmid, $conf) = @_;
>  
> @@ -386,7 +476,7 @@ sub update_lxc_config {
>      $raw .= "lxc.arch = $conf->{arch}\n";
>  
>      my $unprivileged = $conf->{unprivileged};
> -    my $custom_idmap = grep { $_->[0] eq 'lxc.idmap' } @{$conf->{lxc}};
> +    my $custom_idmap = PVE::LXC::Config->has_lxc_entry($conf, 'lxc.idmap');
>  
>      my $ostype = $conf->{ostype} || die "missing 'ostype' - internal error";
>  
> @@ -398,9 +488,16 @@ sub update_lxc_config {
>  	$inc = "$cfgpath/$ostype.userns.conf";
>  	$inc = "$cfgpath/userns.conf" if !-f $inc;
>  	$raw .= "lxc.include = $inc\n";
> -	$raw .= "lxc.seccomp.profile = $cfgpath/pve-userns.seccomp\n";
>      }
>  
> +    my $features = PVE::LXC::Config->parse_features($conf->{features});
> +
> +    $raw .= make_seccomp_config($conf, $unprivileged || $custom_idmap,
> +				$features);
> +
> +    $raw .= make_apparmor_config($conf, $unprivileged || $custom_idmap,
> +				 $features);

what is the combination of '$unprivileged || $custom_idmap'`?
In the methods called this parameter is called just '$unprivileged',
so it's a bit confusing that it gets that also on true if an
user/group ID mapping is used.

maybe pull that out (with your addition this || construct is used in three places)
call it something alike $usernamespaced or $use_userns?

Looks OK besides that.

> +
>      # WARNING: DO NOT REMOVE this without making sure that loop device nodes
>      # cannot be exposed to the container with r/w access (cgroup perms).
>      # When this is enabled mounts will still remain in the monitor's namespace
> diff --git a/src/PVE/LXC/Config.pm b/src/PVE/LXC/Config.pm
> index a2693d7..9f6765e 100644
> --- a/src/PVE/LXC/Config.pm
> +++ b/src/PVE/LXC/Config.pm
> @@ -272,6 +272,41 @@ PVE::JSONSchema::register_standard_option('pve-lxc-snapshot-name', {
>      maxLength => 40,
>  });
>  
> +my $features_desc = {
> +    mount => {
> +	optional => 1,
> +	type => 'string',
> +	description => "Allow mounting file systems of specific types."
> +	    ." This should be a list of file system types as used with the mount command."
> +	    ." Note that this can have negative effects on the container's security."
> +	    ." With access to a loop device, mounting a file can circumvent the mknod"
> +	    ." permission of the devices cgroup, mounting an NFS file system can"
> +	    ." block the host's I/O completely and prevent it from rebooting, etc.",
> +	format_description => 'fstype;fstype;...',
> +	pattern => qr/[a-zA-Z0-9; ]+/,
> +    },
> +    nesting => {
> +	optional => 1,
> +	type => 'boolean',
> +	default => 0,
> +	description => "Allow nesting."
> +	    ." Best used with unprivileged containers with additional id mapping."
> +	    ." Note that this will expose procfs and sysfs contents of the host"
> +	    ." to the guest.",
> +    },
> +    keyctl => {
> +	optional => 1,
> +	type => 'boolean',
> +	default => 0,
> +	description => "For unprivileged containers only: Allow the use of the keyctl() system call."
> +	    ." This is required to use docker inside a container."
> +	    ." By default unprivileged containers will see this system call as non-existent."
> +	    ." This is mostly a workaround for systemd-networkd, as it will treat it as a fatal"
> +	    ." error when some keyctl() operations are denied by the kernel due to lacking permissions."
> +	    ." Essentially, you can choose between running systemd-networkd or docker.",
> +    },
> +};
> +
>  my $confdesc = {
>      lock => {
>  	optional => 1,
> @@ -409,6 +444,12 @@ my $confdesc = {
>  	description => "Makes the container run as unprivileged user. (Should not be modified manually.)",
>  	default => 0,
>      },
> +    features => {
> +	optional => 1,
> +	type => 'string',
> +	format => $features_desc,
> +	description => "Allow containers access to advanced features.",
> +    },
>  };
>  
>  my $valid_lxc_conf_keys = {
> @@ -872,6 +913,9 @@ sub update_pct_config {
>  		}
>  	    } elsif ($opt eq 'unprivileged') {
>  		die "unable to delete read-only option: '$opt'\n";
> +	    } elsif ($opt eq 'features') {
> +		next if $hotplug_error->($opt);
> +		delete $conf->{$opt};
>  	    } else {
>  		die "implement me (delete: $opt)"
>  	    }
> @@ -1025,6 +1069,9 @@ sub update_pct_config {
>  	} elsif ($opt eq 'ostype') {
>  	    next if $hotplug_error->($opt);
>  	    $conf->{$opt} = $value;
> +	} elsif ($opt eq 'features') {
> +	    next if $hotplug_error->($opt);
> +	    $conf->{$opt} = $value;
>  	} else {
>  	    die "implement me: $opt";
>  	}
> @@ -1176,6 +1223,12 @@ sub parse_lxc_network {
>      return $res;
>  }
>  
> +sub parse_features {
> +    my ($class, $data) = @_;
> +    return {} if !$data;
> +    return PVE::JSONSchema::parse_property_string($features_desc, $data);
> +}
> +
>  sub option_exists {
>      my ($class, $name) = @_;
>  
> 





More information about the pve-devel mailing list