[PVE-User] Syslog and Backup
01multi.com
gmo at 01info.be
Mon Nov 10 13:56:58 CET 2008
Hello,
For my test of your ProxMox, I have a stress with this error :
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 7
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
What do you think about this ?
So, I'd like to set up a backup "Delta Block In File" file vzdump (tgz).
I advise you to compress or leave without compression. The idea is to make a backup inside the file to limit the use of bandwidth ...
Thank you in advance, and congratulation for this very good software J
Gaëtan Moyse,
Nov 10 13:40:36 max2 shutdown[8753]: shutting down for system reboot
Nov 10 13:40:37 max2 init: Switching to runlevel: 6
Nov 10 13:40:38 max2 postfix/master[3168]: terminating on signal 15
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bf9881d8) on /
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bf9881b4) on /
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bf9881d8) on /
Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bf9881b4) on /
Nov 10 13:40:44 max2 kernel: CT: 102: stopped
Nov 10 13:40:44 max2 kernel: CT: 101: stopped
Nov 10 13:40:46 max2 pvedaemon[4049]: server closing
Nov 10 13:40:46 max2 ntpd[4178]: ntpd exiting on signal 15
Nov 10 13:40:48 max2 qm[9711]: Stopping Qemu Server - sending shutdown requests to all VMs
Nov 10 13:40:48 max2 qm[9711]: VM 104 sending 'shutdown'
Nov 10 13:40:48 max2 kernel: vmbr0: port 2(tap0) entering disabled state
Nov 10 13:40:48 max2 kernel: vmbr0: port 2(tap0) entering disabled state
Nov 10 13:40:53 max2 rpc.statd[3899]: Caught signal 15, un-registering and exiting.
Nov 10 13:40:53 max2 kernel: Kernel logging (proc) stopped.
Nov 10 13:40:53 max2 kernel: Kernel log daemon terminating.
Nov 10 13:40:54 max2 exiting on signal 15
Nov 10 13:42:30 max2 syslogd 1.4.1#18: restart.
Nov 10 13:42:30 max2 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys cpuset
Nov 10 13:42:30 max2 kernel: Linux version 2.6.24-1-pve (root at oahu) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Fri Oct 24 11:34:13 CEST 2008 (Ubuntu 2.6.24-4.6-server)
Nov 10 13:42:30 max2 kernel: Command line: root=/dev/mapper/pve-root ro
Nov 10 13:42:30 max2 kernel: BIOS-provided physical RAM map:
Nov 10 13:42:30 max2 kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 0000000000100000 - 00000000cfe54000 (usable)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000cfe54000 - 00000000cfe5c000 (ACPI data)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000cfe5c000 - 00000000cfe5d000 (usable)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000cfe5d000 - 00000000d0000000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Nov 10 13:42:30 max2 kernel: BIOS-e820: 0000000100000000 - 00000001affff000 (usable)
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 256, 851540) 1 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 851548, 851549) 2 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 1048576, 1769471) 3 entries of 3200 used
Nov 10 13:42:30 max2 kernel: end_pfn_map = 1769471
Nov 10 13:42:30 max2 kernel: DMI 2.4 present.
Nov 10 13:42:30 max2 kernel: ACPI: RSDP signature @ 0xFFFF8100000F4F00 checksum 0
Nov 10 13:42:30 max2 kernel: ACPI: RSDP 000F4F00, 0024 (r2 HP )
Nov 10 13:42:30 max2 kernel: ACPI: XSDT CFE547C0, 007C (r1 HP ProLiant 2 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: FACP CFE54840, 00F4 (r3 HP ProLiant 2 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: DSDT CFE54940, 213E (r1 HP DSDT 1 INTL 20030228)
Nov 10 13:42:30 max2 kernel: ACPI: FACS CFE54100, 0040
Nov 10 13:42:30 max2 kernel: ACPI: SPCR CFE54140, 0050 (r1 HP SPCRRBSU 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: MCFG CFE541C0, 003C (r1 HP ProLiant 1 0)
Nov 10 13:42:30 max2 kernel: ACPI: HPET CFE54200, 0038 (r1 HP ProLiant 2 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: SPMI CFE54240, 0040 (r5 HP ProLiant 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: ERST CFE54280, 01D0 (r1 HP ProLiant 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: APIC CFE54480, 009E (r1 HP ProLiant 2 0)
Nov 10 13:42:30 max2 kernel: ACPI: FFFF CFE54540, 0176 (r1 HP ProLiant 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: BERT CFE546C0, 0030 (r1 HP ProLiant 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: HEST CFE54700, 00BC (r1 HP ProLiant 1 Ò^D 162E)
Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE59000, 0CC5 (r1 HP SSDTP 1 INTL 20061109)
Nov 10 13:42:30 max2 kernel: No NUMA configuration found
Nov 10 13:42:30 max2 kernel: Faking a node at 0000000000000000-00000001affff000
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 256, 851540) 1 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 851548, 851549) 2 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 1048576, 1769471) 3 entries of 3200 used
Nov 10 13:42:30 max2 kernel: Bootmem setup node 0 0000000000000000-00000001affff000
Nov 10 13:42:30 max2 kernel: Zone PFN ranges:
Nov 10 13:42:30 max2 kernel: DMA 0 -> 4096
Nov 10 13:42:30 max2 kernel: DMA32 4096 -> 1048576
Nov 10 13:42:30 max2 kernel: Normal 1048576 -> 1769471
Nov 10 13:42:30 max2 kernel: Movable zone start PFN for each node
Nov 10 13:42:30 max2 kernel: early_node_map[4] active PFN ranges
Nov 10 13:42:30 max2 kernel: 0: 0 -> 159
Nov 10 13:42:30 max2 kernel: 0: 256 -> 851540
Nov 10 13:42:30 max2 kernel: 0: 851548 -> 851549
Nov 10 13:42:30 max2 kernel: 0: 1048576 -> 1769471
Nov 10 13:42:30 max2 kernel: On node 0 totalpages: 1572339
Nov 10 13:42:30 max2 kernel: DMA zone: 64 pages used for memmap
Nov 10 13:42:30 max2 kernel: DMA zone: 1420 pages reserved
Nov 10 13:42:30 max2 kernel: DMA zone: 2515 pages, LIFO batch:0
Nov 10 13:42:30 max2 kernel: DMA32 zone: 16320 pages used for memmap
Nov 10 13:42:30 max2 kernel: DMA32 zone: 831125 pages, LIFO batch:31
Nov 10 13:42:30 max2 kernel: Normal zone: 11263 pages used for memmap
Nov 10 13:42:30 max2 kernel: Normal zone: 709632 pages, LIFO batch:31
Nov 10 13:42:30 max2 kernel: Movable zone: 0 pages used for memmap
Nov 10 13:42:30 max2 kernel: ACPI: PM-Timer IO Port: 0x908
Nov 10 13:42:30 max2 kernel: ACPI: Local APIC address 0xfee00000
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 10 13:42:30 max2 kernel: Processor #0 (Bootup-CPU)
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Nov 10 13:42:30 max2 kernel: Processor #2
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 10 13:42:30 max2 kernel: Processor #1
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Nov 10 13:42:30 max2 kernel: Processor #3
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Nov 10 13:42:30 max2 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Nov 10 13:42:30 max2 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Nov 10 13:42:30 max2 kernel: IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
Nov 10 13:42:30 max2 kernel: ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
Nov 10 13:42:30 max2 kernel: IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47
Nov 10 13:42:30 max2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Nov 10 13:42:30 max2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 10 13:42:30 max2 kernel: ACPI: IRQ0 used by override.
Nov 10 13:42:30 max2 kernel: ACPI: IRQ2 used by override.
Nov 10 13:42:30 max2 kernel: ACPI: IRQ9 used by override.
Nov 10 13:42:30 max2 kernel: Setting APIC routing to flat
Nov 10 13:42:30 max2 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Nov 10 13:42:30 max2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000cfe54000 - 00000000cfe5c000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000cfe5d000 - 00000000d0000000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
Nov 10 13:42:30 max2 kernel: Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Nov 10 13:42:30 max2 kernel: SMP: Allowing 8 CPUs, 4 hotplug CPUs
Nov 10 13:42:30 max2 kernel: PERCPU: Allocating 42608 bytes of per cpu data
Nov 10 13:42:30 max2 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1543272
Nov 10 13:42:30 max2 kernel: Policy zone: Normal
Nov 10 13:42:30 max2 kernel: Kernel command line: root=/dev/mapper/pve-root ro
Nov 10 13:42:30 max2 kernel: Initializing CPU#0
Nov 10 13:42:30 max2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 10 13:42:30 max2 kernel: Extended CMOS year: 2000
Nov 10 13:42:30 max2 kernel: hpet clockevent registered
Nov 10 13:42:30 max2 kernel: TSC calibrated against HPET
Nov 10 13:42:30 max2 kernel: Marking TSC unstable due to TSCs unsynchronized
Nov 10 13:42:30 max2 kernel: time.c: Detected 2500.088 MHz processor.
Nov 10 13:42:30 max2 kernel: Console: colour VGA+ 80x25
Nov 10 13:42:30 max2 kernel: console [tty0] enabled
Nov 10 13:42:30 max2 kernel: Checking aperture...
Nov 10 13:42:30 max2 kernel: Calgary: detecting Calgary via BIOS EBDA area
Nov 10 13:42:30 max2 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Nov 10 13:42:30 max2 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Nov 10 13:42:30 max2 kernel: Placing software IO TLB between 0x1093000 - 0x5093000
Nov 10 13:42:30 max2 kernel: Memory: 6093384k/7077884k available (2743k kernel code, 195972k reserved, 1389k data, 328k init)
Nov 10 13:42:30 max2 kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1
Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5003.73 BogoMIPS (lpj=10007464)
Nov 10 13:42:30 max2 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Nov 10 13:42:30 max2 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 10 13:42:30 max2 kernel: Mount-cache hash table entries: 256
Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys ns
Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys cpuacct
Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K
Nov 10 13:42:30 max2 kernel: CPU 0/0 -> Node 0
Nov 10 13:42:30 max2 kernel: using mwait in idle threads.
Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0
Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 0
Nov 10 13:42:30 max2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to UP code
Nov 10 13:42:30 max2 kernel: Early unpacking initramfs... done
Nov 10 13:42:30 max2 kernel: ACPI: Core revision 20070126
Nov 10 13:42:30 max2 kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Nov 10 13:42:30 max2 kernel: Page beancounter hash is 524288 entries.
Nov 10 13:42:30 max2 kernel: Using local APIC timer interrupts.
Nov 10 13:42:30 max2 kernel: APIC timer calibration result 20834054
Nov 10 13:42:30 max2 kernel: Detected 20.834 MHz APIC timer.
Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code
Nov 10 13:42:30 max2 kernel: Booting processor 1/4 APIC 0x2
Nov 10 13:42:30 max2 kernel: Initializing CPU#1
Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.26 BogoMIPS (lpj=10000525)
Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K
Nov 10 13:42:30 max2 kernel: CPU 1/2 -> Node 0
Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0
Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 2
Nov 10 13:42:30 max2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code
Nov 10 13:42:30 max2 kernel: Booting processor 2/4 APIC 0x1
Nov 10 13:42:30 max2 kernel: Initializing CPU#2
Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.22 BogoMIPS (lpj=10000444)
Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K
Nov 10 13:42:30 max2 kernel: CPU 2/1 -> Node 0
Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0
Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 1
Nov 10 13:42:30 max2 kernel: CPU2: Thermal monitoring enabled (TM2)
Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code
Nov 10 13:42:30 max2 kernel: Booting processor 3/4 APIC 0x3
Nov 10 13:42:30 max2 kernel: Initializing CPU#3
Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.24 BogoMIPS (lpj=10000496)
Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K
Nov 10 13:42:30 max2 kernel: CPU 3/3 -> Node 0
Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0
Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 3
Nov 10 13:42:30 max2 kernel: CPU3: Thermal monitoring enabled (TM2)
Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
Nov 10 13:42:30 max2 kernel: Brought up 4 CPUs
Nov 10 13:42:30 max2 kernel: CPU0 attaching sched-domain:
Nov 10 13:42:30 max2 kernel: domain 0: span 00000000,00000005
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000001 00000000,00000004
Nov 10 13:42:30 max2 kernel: domain 1: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000005 00000000,0000000a
Nov 10 13:42:30 max2 kernel: domain 2: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000f
Nov 10 13:42:30 max2 kernel: CPU1 attaching sched-domain:
Nov 10 13:42:30 max2 kernel: domain 0: span 00000000,0000000a
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000002 00000000,00000008
Nov 10 13:42:30 max2 kernel: domain 1: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000a 00000000,00000005
Nov 10 13:42:30 max2 kernel: domain 2: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000f
Nov 10 13:42:30 max2 kernel: CPU2 attaching sched-domain:
Nov 10 13:42:30 max2 kernel: domain 0: span 00000000,00000005
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000004 00000000,00000001
Nov 10 13:42:30 max2 kernel: domain 1: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000005 00000000,0000000a
Nov 10 13:42:30 max2 kernel: domain 2: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000f
Nov 10 13:42:30 max2 kernel: CPU3 attaching sched-domain:
Nov 10 13:42:30 max2 kernel: domain 0: span 00000000,0000000a
Nov 10 13:42:30 max2 kernel: groups: 00000000,00000008 00000000,00000002
Nov 10 13:42:30 max2 kernel: domain 1: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000a 00000000,00000005
Nov 10 13:42:30 max2 kernel: domain 2: span 00000000,0000000f
Nov 10 13:42:30 max2 kernel: groups: 00000000,0000000f
Nov 10 13:42:30 max2 kernel: net_namespace: 152 bytes
Nov 10 13:42:30 max2 kernel: Time: 12:42:13 Date: 11/10/08
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 16
Nov 10 13:42:30 max2 kernel: ACPI: bus type pci registered
Nov 10 13:42:30 max2 kernel: PCI: Using configuration type 1
Nov 10 13:42:30 max2 kernel: ACPI: EC: Look up EC in DSDT
Nov 10 13:42:30 max2 kernel: ACPI: Interpreter enabled
Nov 10 13:42:30 max2 kernel: ACPI: (supports S0 S4 S5)
Nov 10 13:42:30 max2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 10 13:42:30 max2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 10 13:42:30 max2 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT]
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
Nov 10 13:42:30 max2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 10 13:42:30 max2 kernel: pnp: PnP ACPI init
Nov 10 13:42:30 max2 kernel: ACPI: bus type pnp registered
Nov 10 13:42:30 max2 kernel: pnp: PnP ACPI: found 10 devices
Nov 10 13:42:30 max2 kernel: ACPI: ACPI bus type pnp unregistered
Nov 10 13:42:30 max2 kernel: PCI: Using ACPI for IRQ routing
Nov 10 13:42:30 max2 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 8
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 20
Nov 10 13:42:30 max2 kernel: PCI-GART: No AMD northbridge found.
Nov 10 13:42:30 max2 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Nov 10 13:42:30 max2 kernel: hpet0: 3 64-bit timers, 14318180 Hz
Nov 10 13:42:30 max2 kernel: Time: hpet clocksource has been installed.
Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 0
Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 2
Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 1
Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 3
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x408-0x40f has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x700-0x71f has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x800-0x83f has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x900-0x97f has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xc80-0xc83 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xcd4-0xcd7 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xf50-0xf58 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xca0-0xca1 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xca4-0xca5 has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x2f8-0x2ff has been reserved
Nov 10 13:42:30 max2 kernel: system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Nov 10 13:42:30 max2 kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:00.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:01.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:02.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:09:00.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:09:00.3
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:02.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: fdf00000-fdffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:03.0
Nov 10 13:42:30 max2 kernel: IO window: 4000-4fff
Nov 10 13:42:30 max2 kernel: MEM window: fdd00000-fdefffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d1000000-d10fffff
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:04.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:05.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: disabled.
Nov 10 13:42:30 max2 kernel: PREFETCH window: disabled.
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:02:00.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: f8000000-f9ffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d1100000-d11fffff
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:06.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: f8000000-f9ffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d1100000-d11fffff
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:04:00.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: fa000000-fbffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d1200000-d12fffff
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:07.0
Nov 10 13:42:30 max2 kernel: IO window: disabled.
Nov 10 13:42:30 max2 kernel: MEM window: fa000000-fbffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d1200000-d12fffff
Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:1e.0
Nov 10 13:42:30 max2 kernel: IO window: 2000-3fff
Nov 10 13:42:30 max2 kernel: MEM window: f7e00000-f7ffffff
Nov 10 13:42:30 max2 kernel: PREFETCH window: d8000000-dfffffff
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.0 to 64
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:00.0 to 64
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:01.0 to 64
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:02.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.3 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:07.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:04:00.0 to 64
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 2
Nov 10 13:42:30 max2 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 10 13:42:30 max2 kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Nov 10 13:42:30 max2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 10 13:42:30 max2 kernel: TCP: Hash tables configured (established 524288 bind 65536)
Nov 10 13:42:30 max2 kernel: TCP reno registered
Nov 10 13:42:30 max2 kernel: checking if image is initramfs... it is
Nov 10 13:42:30 max2 kernel: Freeing initrd memory: 13118k freed
Nov 10 13:42:30 max2 kernel: audit: initializing netlink socket (disabled)
Nov 10 13:42:30 max2 kernel: audit(1226320934.360:1): initialized
Nov 10 13:42:30 max2 kernel: Total HugeTLB memory allocated, 0
Nov 10 13:42:30 max2 kernel: VFS: Disk quotas dquot_6.5.1
Nov 10 13:42:30 max2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 10 13:42:30 max2 kernel: io scheduler noop registered
Nov 10 13:42:30 max2 kernel: io scheduler anticipatory registered
Nov 10 13:42:30 max2 kernel: io scheduler deadline registered
Nov 10 13:42:30 max2 kernel: io scheduler cfq registered (default)
Nov 10 13:42:30 max2 kernel: Boot video device is 0000:01:03.0
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:02.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:03.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:04.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:05.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:06.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:07.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:07.0:pcie00]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.0 to 64
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:09:00.0:pcie10]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:00.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:00.0:pcie20]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:01.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:01.0:pcie20]
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:02.0 to 64
Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability
Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:02.0:pcie20]
Nov 10 13:42:30 max2 kernel: Real Time Clock Driver v1.12ac
Nov 10 13:42:30 max2 kernel: hpet_resources: 0xfed00000 is busy
Nov 10 13:42:30 max2 kernel: Linux agpgart interface v0.102
Nov 10 13:42:30 max2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 10 13:42:30 max2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 10 13:42:30 max2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 10 13:42:30 max2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 10 13:42:30 max2 kernel: RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Nov 10 13:42:30 max2 kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Nov 10 13:42:30 max2 kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Nov 10 13:42:30 max2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 10 13:42:30 max2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 10 13:42:30 max2 kernel: mice: PS/2 mouse device common for all mice
Nov 10 13:42:30 max2 kernel: cpuidle: using governor ladder
Nov 10 13:42:30 max2 kernel: cpuidle: using governor menu
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 1
Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 17
Nov 10 13:42:30 max2 kernel: registered taskstats version 1
Nov 10 13:42:30 max2 kernel: Magic number: 0:737:733
Nov 10 13:42:30 max2 kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Nov 10 13:42:30 max2 kernel: BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Nov 10 13:42:30 max2 kernel: Freeing unused kernel memory: 328k freed
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usbfs
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver hub
Nov 10 13:42:30 max2 kernel: usbcore: registered new device driver usb
Nov 10 13:42:30 max2 kernel: USB Universal Host Controller Interface driver v3.0
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
Nov 10 13:42:30 max2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 1-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 1-0:1.0: 2 ports detected
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
Nov 10 13:42:30 max2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 2-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 2-0:1.0: 2 ports detected
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
Nov 10 13:42:30 max2 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 3-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 3-0:1.0: 2 ports detected
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
Nov 10 13:42:30 max2 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 4-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 4-0:1.0: 2 ports detected
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
Nov 10 13:42:30 max2 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 5-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 5-0:1.0: 2 ports detected
Nov 10 13:42:30 max2 kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Nov 10 13:42:30 max2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 10 13:42:30 max2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 10 13:42:30 max2 kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: 4 ports detected
Nov 10 13:42:30 max2 kernel: SCSI subsystem initialized
Nov 10 13:42:30 max2 kernel: HP CISS Driver (v 3.6.14)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 10 13:42:30 max2 kernel: cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 2292 using DAC
Nov 10 13:42:30 max2 kernel: blocks= 286677120 block_size= 512
Nov 10 13:42:30 max2 kernel: heads=255, sectors=32, cylinders=35132
Nov 10 13:42:30 max2 kernel:
Nov 10 13:42:30 max2 kernel: blocks= 586006832 block_size= 512
Nov 10 13:42:30 max2 kernel: heads=255, sectors=32, cylinders=71815
Nov 10 13:42:30 max2 kernel:
Nov 10 13:42:30 max2 kernel: blocks= 286677120 block_size= 512
Nov 10 13:42:30 max2 kernel: heads=255, sectors=32, cylinders=35132
Nov 10 13:42:30 max2 kernel:
Nov 10 13:42:30 max2 kernel: cciss/c0d0: p1 p2
Nov 10 13:42:30 max2 kernel: blocks= 586006832 block_size= 512
Nov 10 13:42:30 max2 kernel: heads=255, sectors=32, cylinders=71815
Nov 10 13:42:30 max2 kernel:
Nov 10 13:42:30 max2 kernel: cciss/c0d1: p1
Nov 10 13:42:30 max2 kernel: libata version 3.00 loaded.
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Nov 10 13:42:30 max2 kernel: ACPI: PCI interrupt for device 0000:00:1f.1 disabled
Nov 10 13:42:30 max2 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2
Nov 10 13:42:30 max2 kernel: ata_piix 0000:00:1f.1: version 2.12
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Nov 10 13:42:30 max2 kernel: scsi0 : ata_piix
Nov 10 13:42:30 max2 kernel: scsi1 : ata_piix
Nov 10 13:42:30 max2 kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
Nov 10 13:42:30 max2 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
Nov 10 13:42:30 max2 kernel: usb 5-1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: ata1.00: ATAPI: TEAC DV-W28E-RW, G.B2, max UDMA/33
Nov 10 13:42:30 max2 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 3
Nov 10 13:42:30 max2 kernel: usb 5-2: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 5-2:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 5-2:1.0: 7 ports detected
Nov 10 13:42:30 max2 kernel: ata1.00: configured for UDMA/33
Nov 10 13:42:30 max2 kernel: scsi 0:0:0:0: CD-ROM TEAC DV-W28E-RW G.B2 PQ: 0 ANSI: 5
Nov 10 13:42:30 max2 kernel: iTCO_vendor_support: vendor-support=0
Nov 10 13:42:30 max2 kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 3
Nov 10 13:42:30 max2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Nov 10 13:42:30 max2 kernel: iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
Nov 10 13:42:30 max2 kernel: iTCO_wdt: No card detected
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 10 13:42:30 max2 kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 10 13:42:30 max2 kernel: usb usb6: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 6-0:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 6-0:1.0: 8 ports detected
Nov 10 13:42:30 max2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 10 13:42:30 max2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 10 13:42:30 max2 kernel: ide0: I/O resource 0x3F6-0x3F6 not free.
Nov 10 13:42:30 max2 kernel: ide0: ports already in use, skipping probe
Nov 10 13:42:30 max2 kernel: ide1: I/O resource 0x376-0x376 not free.
Nov 10 13:42:30 max2 kernel: ide1: ports already in use, skipping probe
Nov 10 13:42:30 max2 kernel: usb 2-1.1: device not accepting address 3, error -71
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)
Nov 10 13:42:30 max2 last message repeated 4 times
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)
Nov 10 13:42:30 max2 last message repeated 4 times
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)
Nov 10 13:42:30 max2 last message repeated 4 times
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: hub_port_status failed (err = -71)
Nov 10 13:42:30 max2 last message repeated 3 times
Nov 10 13:42:30 max2 kernel: Driver 'sr' needs updating - please use bus_type methods
Nov 10 13:42:30 max2 kernel: usb 2-1: USB disconnect, address 2
Nov 10 13:42:30 max2 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Nov 10 13:42:30 max2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 10 13:42:30 max2 kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
Nov 10 13:42:30 max2 kernel: Driver 'sd' needs updating - please use bus_type methods
Nov 10 13:42:30 max2 kernel: usb 2-1: new full speed USB device using uhci_hcd and address 7
Nov 10 13:42:30 max2 kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: 4 ports detected
Nov 10 13:42:30 max2 kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 8
Nov 10 13:42:30 max2 kernel: usb 2-1.1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: hub 2-1.1:1.0: USB hub found
Nov 10 13:42:30 max2 kernel: hub 2-1.1:1.0: 4 ports detected
Nov 10 13:42:30 max2 kernel: usb 2-1.2: new low speed USB device using uhci_hcd and address 9
Nov 10 13:42:30 max2 kernel: usb 2-1.2: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: usb 2-1.1.1: new low speed USB device using uhci_hcd and address 10
Nov 10 13:42:30 max2 kernel: usb 2-1.1.1: configuration #1 chosen from 1 choice
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver libusual
Nov 10 13:42:30 max2 kernel: Initializing USB Mass Storage driver...
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usb-storage
Nov 10 13:42:30 max2 kernel: USB Mass Storage support registered.
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver hiddev
Nov 10 13:42:30 max2 kernel: input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.0/input/input1
Nov 10 13:42:30 max2 kernel: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
Nov 10 13:42:30 max2 kernel: input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.1/input/input2
Nov 10 13:42:30 max2 kernel: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
Nov 10 13:42:30 max2 kernel: input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input3
Nov 10 13:42:30 max2 kernel: input,hidraw2: USB HID v1.10 Keyboard [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.1-1.2
Nov 10 13:42:30 max2 kernel: input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.1/input/input4
Nov 10 13:42:30 max2 kernel: input,hidraw3: USB HID v1.10 Mouse [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.1-1.2
Nov 10 13:42:30 max2 kernel: input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5
Nov 10 13:42:30 max2 kernel: input,hidraw4: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1d.1-1.1.1
Nov 10 13:42:30 max2 kernel: input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6
Nov 10 13:42:30 max2 kernel: input,hiddev96,hidraw5: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1d.1-1.1.1
Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usbhid
Nov 10 13:42:30 max2 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Nov 10 13:42:30 max2 kernel: device-mapper: uevent: version 1.0.3
Nov 10 13:42:30 max2 kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel at redhat.com
Nov 10 13:42:30 max2 kernel: kjournald starting. Commit interval 5 seconds
Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 10 13:42:30 max2 kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
Nov 10 13:42:30 max2 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5F800, 00D8 (r1 HP CPU0CST 1 INTL 20061109)
Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._CST] (Node ffff8101a8c01040), AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5F900, 00D8 (r1 HP CPU1CST 1 INTL 20061109)
Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff8101a46ead40), AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5FA00, 00D8 (r1 HP CPU2CST 1 INTL 20061109)
Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff8101a3f79da0), AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5FB00, 00D8 (r1 HP CPU3CST 1 INTL 20061109)
Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff8101a46ea7e0), AE_NOT_FOUND
Nov 10 13:42:30 max2 kernel: ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
Nov 10 13:42:30 max2 last message repeated 3 times
Nov 10 13:42:30 max2 kernel: EDAC MC: Ver: 2.1.0 Oct 24 2008
Nov 10 13:42:30 max2 kernel: input: Power Button (FF) as /devices/virtual/input/input8
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_del_mc
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_add_mc
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_pci_create_generic_ctl
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_alloc
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_handle_fbd_ce
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_free
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_pci_release_generic_ctl
Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_handle_fbd_ue
Nov 10 13:42:30 max2 kernel: EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
Nov 10 13:42:30 max2 kernel: EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
Nov 10 13:42:30 max2 kernel: ACPI: Power Button (FF) [PWRF]
Nov 10 13:42:30 max2 kernel: intel_rng: FWH not detected
Nov 10 13:42:30 max2 kernel: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Nov 10 13:42:30 max2 kernel: ipmi message handler version 39.1
Nov 10 13:42:30 max2 kernel: IPMI System Interface driver.
Nov 10 13:42:30 max2 kernel: ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
Nov 10 13:42:30 max2 kernel: ACPI: Thermal Zone [THM0] (8 C)
Nov 10 13:42:30 max2 kernel: ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
Nov 10 13:42:30 max2 kernel: IPMI kcs interface initialized
Nov 10 13:42:30 max2 kernel: ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Nov 10 13:42:30 max2 kernel: ipmi_si: duplicate interface
Nov 10 13:42:30 max2 kernel: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr 00:22:64:98:4b:f6
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Nov 10 13:42:30 max2 kernel: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr 00:22:64:98:0a:8a
Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21
Nov 10 13:42:30 max2 kernel: ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21
Nov 10 13:42:30 max2 kernel: Using irq 21
Nov 10 13:42:30 max2 kernel: ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
Nov 10 13:42:30 max2 kernel: IPMI kcs interface initialized
Nov 10 13:42:30 max2 kernel: EXT3 FS on dm-1, internal journal
Nov 10 13:42:30 max2 kernel: kjournald starting. Commit interval 5 seconds
Nov 10 13:42:30 max2 kernel: EXT3 FS on dm-2, internal journal
Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 10 13:42:30 max2 kernel: kjournald starting. Commit interval 5 seconds
Nov 10 13:42:30 max2 kernel: EXT3 FS on cciss/c0d0p1, internal journal
Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 10 13:42:30 max2 kernel: Adding 5242872k swap on /dev/pve/swap. Priority:-1 extents:1 across:5242872k
Nov 10 13:42:30 max2 kernel: Bridge firewalling registered
Nov 10 13:42:30 max2 kernel: vmbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Nov 10 13:42:30 max2 kernel: device eth0 entered promiscuous mode
Nov 10 13:42:30 max2 kernel: audit(1226320946.891:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
Nov 10 13:42:30 max2 kernel: bnx2: eth0: using MSI
Nov 10 13:42:30 max2 kernel: bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
Nov 10 13:42:30 max2 kernel: vmbr0: port 1(eth0) entering learning state
Nov 10 13:42:30 max2 kernel: vmbr0: topology change detected, propagating
Nov 10 13:42:30 max2 kernel: vmbr0: port 1(eth0) entering forwarding state
Nov 10 13:42:31 max2 postfix/master[3165]: daemon started -- version 2.3.8, configuration /etc/postfix
Nov 10 13:42:31 max2 kernel: NET: Registered protocol family 10
Nov 10 13:42:31 max2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 10 13:42:32 max2 kernel: tun: Universal TUN/TAP device driver, 1.6
Nov 10 13:42:32 max2 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
Nov 10 13:42:33 max2 kernel: CT: 101: started
Nov 10 13:42:35 max2 kernel: CT: 102: started
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bfef9fe0) on /
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bfef9fe8) on /
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bfef9fc4) on /
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bfef9fe0) on /
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bfef9fe8) on /
Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bfef9fc4) on /
Nov 10 13:42:37 max2 rpc.statd[3907]: Version 1.0.10 Starting
Nov 10 13:42:38 max2 pvedaemon[4079]: starting server
Nov 10 13:42:38 max2 pvedaemon[4079]: starting 2 worker(s)
Nov 10 13:42:38 max2 pvedaemon[4079]: worker 4088 started
Nov 10 13:42:38 max2 pvedaemon[4079]: worker 4089 started
Nov 10 13:42:39 max2 pvetunnel[4087]: not starting server - not part of cluster
Nov 10 13:42:39 max2 pvemirror[4135]: not starting server - not part of cluster
Nov 10 13:42:39 max2 ntpd[4188]: ntpd 4.2.2p4 at 1.1585-o Sun Mar 4 13:05:22 UTC 2007 (1)
Nov 10 13:42:39 max2 ntpd[4189]: precision = 1.000 usec
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface wildcard, ::#123 Disabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface lo, ::1#123 Enabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface vmbr0, fe80::222:64ff:fe98:4bf6#123 Enabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface eth0, fe80::222:64ff:fe98:4bf6#123 Enabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface lo, 127.0.0.1#123 Enabled
Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface vmbr0, 172.19.3.83#123 Enabled
Nov 10 13:42:39 max2 ntpd[4189]: kernel time sync status 0040
Nov 10 13:42:39 max2 ntpd[4189]: frequency initialized -55.603 PPM from /var/lib/ntp/ntp.drift
Nov 10 13:42:39 max2 kernel: loaded kvm module (kvm-75)
Nov 10 13:42:40 max2 qm[4214]: VM 104 start
Nov 10 13:42:40 max2 kernel: device tap0 entered promiscuous mode
Nov 10 13:42:40 max2 kernel: audit(1226320960.611:3): dev=tap0 prom=256 old_prom=0 auid=4294967295
Nov 10 13:42:40 max2 kernel: vmbr0: port 2(tap0) entering learning state
Nov 10 13:42:40 max2 kernel: vmbr0: topology change detected, propagating
Nov 10 13:42:40 max2 kernel: vmbr0: port 2(tap0) entering forwarding state
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 0
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 1
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 2
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 3
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 4
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 5
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 6
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 7
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 0
Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 1
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 4
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current]
Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present
Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 4
Nov 10 13:42:41 max2 qm[4214]: VM 103 start
Nov 10 13:42:41 max2 kernel: device tap1 entered promiscuous mode
Nov 10 13:42:41 max2 kernel: audit(1226320961.359:4): dev=tap1 prom=256 old_prom=0 auid=4294967295
Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering learning state
Nov 10 13:42:41 max2 kernel: vmbr0: topology change detected, propagating
Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering forwarding state
Nov 10 13:42:41 max2 qm[4214]: VM 103 start failed: command '/usr/bin/kvm -monitor unix:/var/run/qemu-server/103.mon,server,nowait -vnc unix:/var/run/qemu-server/103.vnc,password -pidfile /var/run/qemu-server/103.pid -daemonize -usbdevice tablet -name F10X64-01 -smp 1 -id 103 -cpuunits 1000 -boot cad -no-acpi -tdf -k fr-be -drive file=/var/lib/vz/images/103/vm-103-disk.qcow2,if=ide,index=0,boot=on -drive file=/var/lib/vz/template/iso/F10-PR-x86_64-Live-KDE.iso,if=ide,index=2,media=cdrom -m 1024 -net tap,vlan=0,script=/var/lib/qemu-server/bridge-vlan0 -net nic,vlan=0,model=rtl8139,macaddr=0A:10:CD:37:66:A4' failed with exit code 1: qemu: could not open disk image /var/lib/vz/template/iso/F10-PR-x86_64-Live-KDE.iso
Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering disabled state
Nov 10 13:42:41 max2 /usr/sbin/cron[4392]: (CRON) INFO (pidfile fd = 3)
Nov 10 13:42:41 max2 /usr/sbin/cron[4397]: (CRON) STARTUP (fork ok)
Nov 10 13:42:41 max2 /usr/sbin/cron[4397]: (CRON) INFO (Running @reboot jobs)
Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering disabled state
Nov 10 13:42:41 max2 /USR/SBIN/CRON[4422]: (root) CMD (test -x /usr/lib/atsar/atsadc && (LOGDIR=/var/log/atsar; CURDAY=`date +%d`; find $LOGDIR/atsa$CURDAY -mtime +2 -type f -exec rm {} \; 2> /dev/null; /usr/lib/atsar/atsadc $LOGDIR/atsa$CURDAY))
Nov 10 13:42:41 max2 kernel: vmbr0: no IPv6 routers present
Nov 10 13:42:42 max2 kernel: eth0: no IPv6 routers present
Nov 10 13:42:43 max2 kernel: kvm: emulating exchange as write
Nov 10 13:42:46 max2 ntpd[4189]: synchronized to 212.100.178.143, stratum 2
Nov 10 13:42:46 max2 ntpd[4189]: time reset -0.453851 s
Nov 10 13:42:46 max2 ntpd[4189]: kernel time sync enabled 0001
Nov 10 13:42:47 max2 proxwww[4717]: Starting new child 4717
Nov 10 13:42:47 max2 proxwww[4718]: Starting new child 4718
Nov 10 13:42:50 max2 kernel: tap0: no IPv6 routers present
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20081110/ce145615/attachment.htm>
More information about the pve-user
mailing list