[PVE-User] How to activate eth1?

[Martin Maurer]

See my video tutorials http://pve.proxmox.com/wiki/Category:Video_Tutorials
(there is no need for a gateway on eth1, see http://pve.proxmox.com/wiki/Network_Model)

Best Regards,

Martin Maurer

martin at proxmox.com<mailto:martin at proxmox.com>


From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-bounces at pve.proxmox.com] On Behalf Of Bruce B
Sent: Freitag, 29. Oktober 2010 07:18
To: pve-user at pve.proxmox.com
Subject: [PVE-User] How to activate eth1?

Hi Everyone,

Just learning Proxmox here. I can't seem to get the network running properly. Documentation is kind of incomplete on the wiki:


Interface

Active

Ports/Slaves

Autostart

IP Address

Subnet Mask

Gateway


[https://65.39.201.156:21443/images/tarrdown.png]

vmbr0

yes

eth0

[X]

10.100.100.130

255.255.255.0

10.100.100.1

[https://65.39.201.156:21443/images/tarrdown.png]

vmbr1

yes

eth1

[X]

10.100.100.131

255.255.255.0





Seems like I am missing the Gateway in vmbr1 and there is no place for it when I edit it. So, I assigned it to a VM but I don't see the IP picked up.

Furthermore, for redundancy reasons should I bond eth0 and eth1 or should I keep them as separate connections come in and then assign each VM both connections?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20101029/07923846/attachment.htm>