[PVE-User] Exec command hpacucli no controllers detected in proxmox 2.0

[maykel at maykel.sytes.net]

El 2013-04-04 16:41, Gilles Mocellin escribió:
> Le 04/04/2013 14:29, Knaupp, Thomas a écrit :
>> Hello,
>>
>>> I like check raid1 without shutdown machine. I have installed
>>> hpacucli-x.x.amd64.deb
>>>
>>> comando exec -> hpacucli ctrl all show config
>>>
>>> Error: No controllers detected
>>>
>>> This error is for proxmox or debian?
>>
>> Actually it is a question for the maintainer of this debian package.
>> Although you didn't write what hardware you are using.
>> I guess it is a HP SmartArray Controller?
>>
>> Have you tried using a current version of the utility?
>> A quick google search finds more users with this problem (and 
>> solutions):
>> 
>> http://blog.wpkg.org/2012/03/15/hpacucli-error-no-controllers-detected-with-hpsa-module-in-use/
>>
>> As I don't know, which version of the tool you used, you might 
>> consider trying this repo:
>> http://hwraid.le-vert.net/wiki/DebianPackages
>
> I have 2 HP DL360 G8 here qithe the same problem.
> Upgrading hpacucli from the site
> http://hwraid.le-vert.net/wiki/DebianPackages solve it.
>
> HP repository for Debian seems to lag behind...
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Thanks. I resolved my problem with:

http://blog.wpkg.org/2012/03/15/hpacucli-error-no-controllers-detected-with-hpsa-module-in-use/

But I get this error in slot0 raid1:

root at proxmox-test:/home# ./uname26 hpacucli ctrl all show config

Smart Array P410i in Slot 0 (Embedded)    (sn: 5001438011863CB0)

    array A (SAS, Unused Space: 0 MB)


       logicaldrive 1 (136.7 GB, RAID 1, OK)

       physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, 
Predictive Failure)
       physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK)

Why predictive failure?? Disk damaged??

I search in google and found:

A drive with prefailure won't necessarily have an LED indicator 
(sometimes it's a slow amber blink), so identifying it for smart hands 
is a good idea. You don't need to remove the drive from the array or 
re-add it, though. Those functions will be handled by the controller 
automatically. All you will need is the hpacucli controller slot=1 pd 
1:8 modify led=on line.

Can I exec the command "hpacucli controller slot=1 pd 1:8 modify 
led=on" and resolved it??

Thanks in advanced and thanks for all. Sorry for my english.