[PVE-User] Problems with running Pve under the New Hetzner Rootserver Generation with Haswell

[Marc]

Hi there,

I have the same problem, I have to reboot electrically the server almost
every day (two times today already).

I have nothing in the logs, the server just hangs.

Has a solution been found ?

Thanks.

Le 27/07/2013 14:26, Amand Tihon a écrit :
> Hi,
> 
> Has a solution or workaround been found ? I'm also seeing my EX40 hanging, but 
> I don't have access to the hetzner forum yet (my account must still be 
> activated).
> 
> Thanks.
> 
> Amand.
> 
> Le jeudi 18 juillet 2013 16:05:09  a écrit :
>> Hi Martin,
>>
>> same Problem. 2.6.32-22-pve is running but hangs after a short period of
>> time, no log entries. After a reset the server comes up again.
>> I've no idea if a installation is impossible or not, we're using wheezy
>> on the base. Based on this tut:
>> http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy
>>
>> chris
>>
>> Am 18.07.13 15:06, schrieb Martin Maurer:
>>> Pls test with latest 2.6.32-22 kernel, see
>>> http://forum.proxmox.com/threads/14269-No-Installation-possible-Haswell-Xe
>>> on-1225v3-X10SLM-F-Supermicro
>>>
>>>
>>>
>>> Martin
>>>
>>>
>>>
>>> *From:*pve-user-bounces at pve.proxmox.com
>>> [mailto:pve-user-bounces at pve.proxmox.com] *On Behalf Of *Christain
>>> Blaich *Sent:* Donnerstag, 18. Juli 2013 11:33
>>> *To:* pve-user at pve.proxmox.com
>>> *Subject:* [PVE-User] Problems with running Pve under the New Hetzner
>>> Rootserver Generation with Haswell
>>>
>>>
>>>
>>> Hey,
>>>
>>> I got a new RootServer from the new Hetzner Generation called EX40
>>> http://www.hetzner.de/hosting/produktmatrix/rootserver-produktmatrix-ex
>>> Unfortunately  the Server does not start with 2.6.32-20-pve stable.
>>> 2.6.32-21-pve dev is running but hangs after a short period of time,
>>> no log entries. After a reset the server comes up again.
>>> 2.6.32-22-pve dev same like 21.
>>>
>>> model name    : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
>>> root at Debian-70-wheezy-64-minimal ~ # lspci
>>> 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
>>> 00:02.0 VGA compatible controller: Intel Corporation Haswell
>>> Integrated Graphics Controller (rev 06)
>>> 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
>>> Controller (rev 04)
>>> 00:16.0 Communication controller: Intel Corporation Lynx Point MEI
>>> Controller #1 (rev 04)
>>> 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
>>> Controller #2 (rev 04)
>>> 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port
>>> #1 (rev d4)
>>> 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
>>> 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
>>> Controller #1 (rev 04)
>>> 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
>>> 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA
>>> Controller 1 [AHCI mode] (rev 04)
>>> 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
>>> 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
>>> Bridge (rev 03)
>>> 03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
>>> Ethernet Controller (rev 05)
>>>
>>> Hw should be ok and is tested. Other useres are fighting with the same
>>> errors.
>>> See http://forum.hetzner.de/wbb2/thread.php?threadid=20291
>>>
>>> Any Ideas ?
>>>
>>> Thx, chris
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://pve.proxmox.com/pipermail/pve-user/attachments/20130718/14e2a050/at
>> tachment.html>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 


-- 
Marc