[PVE-User] Create Bond on proxmox 3.1

[henry]

Hi Gerald,... thanks for your help..

this is my "ifconfig" machine :

bond0     Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0c
           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500 Metric:1
           RX packets:3035043 errors:0 dropped:0 overruns:0 frame:0
           TX packets:27987 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:433969645 (413.8 MiB)  TX bytes:1881264 (1.7 MiB)

eth0      Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0b
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1319944 errors:0 dropped:0 overruns:0 frame:0
           TX packets:2160694 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:177917566 (169.6 MiB)  TX bytes:2720123222 (2.5 GiB)
           Interrupt:35

eth1      Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0c
           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
           RX packets:1913720 errors:0 dropped:0 overruns:0 frame:0
           TX packets:27987 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:311070872 (296.6 MiB)  TX bytes:1881264 (1.7 MiB)
           Interrupt:38

eth2      Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0c
           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
           RX packets:1121323 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:122898773 (117.2 MiB)  TX bytes:0 (0.0 B)
           Interrupt:34

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:408802 errors:0 dropped:0 overruns:0 frame:0
           TX packets:408802 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:359570282 (342.9 MiB)  TX bytes:359570282 (342.9 MiB)

venet0    Link encap:UNSPEC  HWaddr 
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
           inet6 addr: fe80::1/128 Scope:Link
           UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500 Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:3 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vmbr0     Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0b
           inet addr:192.168.2.4  Bcast:192.168.2.255 Mask:255.255.255.0
           inet6 addr: fe80::ca1f:66ff:fed4:6a0b/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1061548 errors:0 dropped:0 overruns:0 frame:0
           TX packets:724773 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:118879990 (113.3 MiB)  TX bytes:2633974067 (2.4 GiB)

vmbr1     Link encap:Ethernet  HWaddr c8:1f:66:d4:6a:0c
           inet addr:192.168.10.2  Bcast:192.168.10.255 Mask:255.255.255.0
           inet6 addr: fe80::ca1f:66ff:fed4:6a0c/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:1655838 errors:0 dropped:0 overruns:0 frame:0
           TX packets:26782 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:241379533 (230.1 MiB)  TX bytes:1669950 (1.5 MiB)

root at pve-dell1:/# route -n
Kernel IP routing table
Destination      Gateway         Genmask         Flags   Metric Ref    
Use Iface
192.168.2.0       0.0.0.0            255.255.255.0   U        0      
0        0 vmbr0
192.168.10.0     0.0.0.0            255.255.255.0   U        0     
0        0 vmbr
0.0.0.0              192.168.10.1     0.0.0.0             UG 0          
0        0 vmbr1


thanks again.

Best Regards


Henry Leonardi Sutrisna
PT. Metindo Erasakti
IT/EDP Dept

On 3/4/2014 7:35 PM, Gerald Brandt wrote:
>
> On 2014-03-04, 2:08 AM, henry wrote:
>> hi guys,...
>>
>> i'm still get error, and can not ping yet.   is this okey ??? see the 
>> picture below :
>>
>>
>>
>> why still can not ping ??? i can not ping 192.168.10.2 on client or 
>> router. i'm use prox ver 3.1-21. thanks for your help.
>>
>>
> Hi Henry,
>
> Could you show me the output of 'ifconfig' and 'route -n'?  Can the 
> proxmox box itself ping 192.168.10.2?  I know bonding works, I just 
> set up balance-rr for my storage a few weeks ago, and am getting 
> throughput of up to 208MB/s on two 1GigE links.
>
> Gerald
>
> -- 
> Gerald Brandt
> Majentis Technologies
> gbr at majentis.com
> 204-229-6595
> www.majentis.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20140305/cd742d6c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 38852 bytes
Desc: not available
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20140305/cd742d6c/attachment.jpe>