[PVE-User] Cluster issue!

[Ian Coetzee]

Hi Gilberto,

It is not needed to change manually. You need to check that your network
hardware (switches, NIC's) supports multicast traffic.

I am running a cluster without manually changing the corosync.conf file.

Kind regards

On 31 January 2018 at 12:35, Gilberto Nunes <gilberto.nunes32 at gmail.com>
wrote:

> >>the bindnetaddr is not the ip of the master, but is used to determine in
> which network corosync sends/receives (so it should not really matter if it
> is
> >> yyy.120 or yyy.0 as long as those are in the same network)
> Yes! I know that!
> My question is: Why do I need change it manualy??
> I expected that pvecm do it automaticaly...
> I tried it several times... I have destroy custer, I did a fresh install of
> proxmox. I have created a new cluster, and everytime that I opened the
> /etc/pve/corosync.conf, the binnetdaddr was set to the IP of NIC installed
> in first pve cluster node;
> Just after I change to the network IP, instead host IP, so cluster worked
> properly.
> I do not understand why I need change it manualy!
>
> ---
> Gilberto Nunes Ferreira
>
> (47) 3025-5907
> (47) 99676-7530 - Whatsapp / Telegram
>
> Skype: gilberto.nunes36
>
>
>
>
> 2018-01-31 5:52 GMT-02:00 Dominik Csapak <d.csapak at proxmox.com>:
>
> > On 01/30/2018 08:09 PM, Gilberto Nunes wrote:
> >
> >> Hi there
> >>
> >> After I change the corosync.conf, cluster is function again:
> >>
> >> Here's the original corosync.conf, just after I create the cluster:
> >>
> >> logging {
> >>    debug: off
> >>    to_syslog: yes
> >> }
> >>
> >> nodelist {
> >>    node {
> >>      name: pve01
> >>      nodeid: 1
> >>      quorum_votes: 1
> >>      ring0_addr: 10.10.10.210
> >>    }
> >>    node {
> >>      name: pve02
> >>      nodeid: 2
> >>      quorum_votes: 1
> >>      ring0_addr: 10.10.10.220
> >>    }
> >> }
> >>
> >> quorum {
> >>    provider: corosync_votequorum
> >> }
> >>
> >> totem {
> >>    cluster_name: HOMECLUSTER
> >>    config_version: 2
> >>    interface {
> >>      bindnetaddr: 10.10.10.120    -----------> this is the IP of
> "master"
> >> node....
> >>
> >
> > the bindnetaddr is not the ip of the master, but is used to determine in
> > which network corosync sends/receives (so it should not really matter if
> it
> > is yyy.120 or yyy.0 as long as those are in the same network)
> >
> >
> >      ringnumber: 0
> >>
> >>    }
> >>    ip_version: ipv4
> >>    secauth: on
> >>    version: 2
> >> }
> >> }
> >>
> >>
> >> And this is the "now working" version:
> >>
> >> logging {
> >>    debug: off
> >>    to_syslog: yes
> >> }
> >>
> >> nodelist {
> >>    node {
> >>      name: pve01
> >>      nodeid: 1
> >>      quorum_votes: 1
> >>      ring0_addr: 10.10.10.210
> >>    }
> >>    node {
> >>      name: pve02
> >>      nodeid: 2
> >>      quorum_votes: 1
> >>      ring0_addr: 10.10.10.220
> >>    }
> >> }
> >>
> >> quorum {
> >>    provider: corosync_votequorum
> >> }
> >>
> >> totem {
> >>    cluster_name: HOMECLUSTER
> >>    config_version: 2
> >>    interface {
> >>      bindnetaddr: 10.10.10.0
> >>      ringnumber: 0
> >>      mcastport: 5405
> >>    }
> >>    transport: udpu
> >>
> >
> > i guess this is the thing which made it work, namely i guess that
> > multicast does not properly work in your network
> >
> >    ip_version: ipv4
> >>    secauth: on
> >>    version: 2
> >> }
> >> logging {
> >>          fileline: off
> >>          to_logfile: yes
> >>          to_syslog: yes
> >>          debug: off
> >>          logfile: /var/log/cluster/corosync.log
> >>          debug: off
> >>          timestamp: on
> >>          logger_subsys {
> >>                  subsys: AMF
> >>                  debug: off
> >>          }
> >> }
> >>
> >>
> >> After reboot, everything is running smootlhy
> >>
> >> ---
> >> Gilberto Nunes Ferreira
> >>
> >> (47) 3025-5907
> >> (47) 99676-7530 - Whatsapp / Telegram
> >>
> >> Skype: gilberto.nunes36
> >>
> >>
> >>
> >>
> >> 2018-01-30 15:39 GMT-02:00 Gilberto Nunes <gilberto.nunes32 at gmail.com>:
> >>
> >> Hi
> >>>
> >>> I have a fresh instalation of Proxmox 5.1.
> >>> In the /etc/hosts I have:
> >>>
> >>> 127.0.0.1 localhost.localdomain localhost
> >>> 10.10.10.210 pve01.domain.com pve01 pvelocalhost
> >>> 10.10.10.220 pve02.domain.com pve02
> >>>
> >>> in both sides, pve01 and pve02
> >>>
> >>> I form the cluster with the command pvecm create HOMECLUSTER
> >>> I ssh to pve02 and do pvecm add pve01.
> >>> The cluster are formed as expected, but after 2 minutes, I get this
> error
> >>> in /var/log/syslog:
> >>>
> >>> Jan 30 15:23:04 pve01 corosync[1482]: error   [TOTEM ] FAILED TO
> RECEIVE
> >>> Jan 30 15:23:04 pve01 corosync[1482]:  [TOTEM ] FAILED TO RECEIVE
> >>> Jan 30 15:23:05 pve01 corosync[1482]: notice  [TOTEM ] A new
> membership (
> >>> 10.10.10.210:12) was formed. Members left: 2
> >>> Jan 30 15:23:05 pve01 corosync[1482]: notice  [TOTEM ] Failed to
> receive
> >>> the leave message. failed: 2
> >>> Jan 30 15:23:05 pve01 corosync[1482]:  [TOTEM ] A new membership (
> >>> 10.10.10.210:12) was formed. Members left: 2
> >>> Jan 30 15:23:05 pve01 corosync[1482]:  [TOTEM ] Failed to receive the
> >>> leave message. failed: 2
> >>>
> >>> So, I stop the cluster ( systemctl stop pve-cluster;systemctl stop
> >>> corosync) and start pmxcfs -l (localy).
> >>> I saw that in /etc/pve/corosync.conf file, the statement line:
> >>>
> >>>      bindnetaddr: 10.10.10.210
> >>>
> >>> So after I change this line to this:
> >>>
> >>>      bindnetaddr: 10.10.10.0
> >>>
> >>> and restart both nodes, the cluster back to normality.
> >>>
> >>> This second line wouldn't add but pvecm script?
> >>> Why I need to change it to the network address by myself and not pvecm
> >>> script do this automaticaly??
> >>>
> >>> I cannot understand!
> >>>
> >>> Any advice?
> >>>
> >>> Thanks a lot.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ---
> >>> Gilberto Nunes Ferreira
> >>>
> >>> (47) 3025-5907
> >>> (47) 99676-7530 - Whatsapp / Telegram
> >>>
> >>> Skype: gilberto.nunes36
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >> pve-user mailing list
> >> pve-user at pve.proxmox.com
> >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >>
> >>
> >
> > _______________________________________________
> > pve-user mailing list
> > pve-user at pve.proxmox.com
> > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>