Software RAID: Difference between revisions

From Proxmox VE
Jump to navigation Jump to search
No edit summary
(fix grammer)
Line 1: Line 1:
== Introduction ==
== Introduction ==
All Proxmox VE versions does not support '''the Linux Software RAID (mdraid)'''. That means, its not tested in our labs and its not recommended, but its still used by experience users. If you want to run a supported configuration, go for [[Hardware RAID|Hardware RAID]].
All Proxmox VE versions do not support '''Linux Software RAID (mdraid)'''. That means, it's not tested in our labs and not recommended, but it's still used by experienced users. If you want to run a supported configuration, go for [[Hardware RAID|Hardware RAID]] or a ZFS RAID during installation.


NOTE:
NOTE:
Line 6: Line 6:
* Proxmox VE since 3.4 supports Software RAID if you choose [[Storage:_ZFS]]
* Proxmox VE since 3.4 supports Software RAID if you choose [[Storage:_ZFS]]


If you still want to use mdraid, you can create required RAID level during Debian installation and then install Proxmox VE or create RAID after install Proxmox VE. Look at the external links below and the following pages:
If you still want to use mdraid, you can create the required RAID level during Debian installation and then install Proxmox VE or create RAID after install Proxmox VE. Look at the external links below and the following pages:


* [[Install Proxmox VE on Debian Squeeze]]
* [[Install Proxmox VE on Debian Squeeze]]

Revision as of 13:33, 21 January 2020

Introduction

All Proxmox VE versions do not support Linux Software RAID (mdraid). That means, it's not tested in our labs and not recommended, but it's still used by experienced users. If you want to run a supported configuration, go for Hardware RAID or a ZFS RAID during installation.

NOTE:

  • Proxmox VE 2.x supports Fake RAID (BIOS RAID), but not since Proxmox VE 3.x
  • Proxmox VE since 3.4 supports Software RAID if you choose Storage:_ZFS

If you still want to use mdraid, you can create the required RAID level during Debian installation and then install Proxmox VE or create RAID after install Proxmox VE. Look at the external links below and the following pages:

External Links