Software RAID

From Proxmox VE
Revision as of 14:33, 21 January 2020 by A.lauterer (talk | contribs) (fix grammer)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

All Proxmox VE versions do not support Linux Software RAID (mdraid). That means, it's not tested in our labs and not recommended, but it's still used by experienced users. If you want to run a supported configuration, go for Hardware RAID or a ZFS RAID during installation.

NOTE:

  • Proxmox VE 2.x supports Fake RAID (BIOS RAID), but not since Proxmox VE 3.x
  • Proxmox VE since 3.4 supports Software RAID if you choose Storage:_ZFS

If you still want to use mdraid, you can create the required RAID level during Debian installation and then install Proxmox VE or create RAID after install Proxmox VE. Look at the external links below and the following pages:

External Links