Upgrade from 7 to 8

Introduction

Proxmox VE 8.x introduces several new major features. You should plan the upgrade carefully, make and verify backups before beginning, and test extensively. Depending on the existing configuration, several manual steps—including some downtime—may be required.

Note: A valid and tested backup is always required before starting the upgrade process. Test the backup beforehand in a test lab setup.

In case the system is customized and/or uses additional packages or any other third party repositories/packages, ensure those packages are also upgraded to and compatible with Debian Bookworm.

In general, there are two ways to upgrade a Proxmox VE 7.x system to Proxmox VE 8.x:

• A new installation on new hardware (restoring VMs from the backup)
• An in-place upgrade via apt (step-by-step)

New installation

• Backup all VMs and containers to an external storage (see Backup and Restore).
• Backup all files in /etc

  required: files in /etc/pve, as well as /etc/passwd, /etc/network/interfaces, /etc/resolv.conf, and anything that deviates from a default installation.

• Install latest Proxmox VE 8.x from the ISO (this will delete all data on the existing host).
• Empty the browser cache and/or force-reload (CTRL + SHIFT + R, or for MacOS ⌘ + Alt + R) the Web UI.
• Rebuild your cluster, if applicable.
• Restore the file /etc/pve/storage.cfg (this will make the external storage used for backup available).
• Restore firewall configs /etc/pve/firewall/ and /etc/pve/nodes/<node>/host.fw (if applicable).
• Restore all VMs from backups (see Backup and Restore).

Administrators comfortable with the command line can follow the procedure Bypassing backup and restore when upgrading, if all VMs/CTs are on a single shared storage.

Breaking Changes

See the release notes for breaking (API) changes: https://pve.proxmox.com/wiki/Roadmap#8.0-known-issues

In-place upgrade

In-place upgrades are carried out via apt. Familiarity with apt is required to proceed with this upgrade method.

Prerequisites

• Upgraded to the latest version of Proxmox VE 7.4 on all nodes.

  Ensure your node(s) have correct package repository configuration (web UI, Node -> Repositories) if your pve-manager version isn't at least 7.4-15.

• Hyper-converged Ceph: upgrade any Ceph Octopus or Ceph Pacific cluster to Ceph 17.2 Quincy before you start the Proxmox VE upgrade to 8.0.

  Follow the guide Ceph Octopus to Pacific and Ceph Pacific to Quincy, respectively.

• Co-installed Proxmox Backup Server: see the Proxmox Backup Server 2 to 3 upgrade how-to
• Reliable access to the node. It's recommended to have access over a host independent channel like iKVM/IPMI or physical access.

  If only SSH is available we recommend testing the upgrade on an identical, but non-production machine first.

• A healthy cluster
• Valid and tested backup of all VMs and CTs (in case something goes wrong)
• At least 5 GB free disk space on the root mount point.
• Check known upgrade issues

Testing the Upgrade

An upgrade test can be easily performed using a standalone server. Install the Proxmox VE 7.4 ISO on some test hardware, then upgrade this installation to the latest minor version of Proxmox VE 7.4 (see Package repositories). To replicate the production setup as closely as possible, copy or create all relevant configurations to the test machine, then start the upgrade. It is also possible to install Proxmox VE 7.4 in a VM and test the upgrade in this environment.

Actions step-by-step

The following actions need to be carried out from the command line of each Proxmox VE node in your cluster

Perform the actions via console or ssh; preferably via console to avoid interrupted ssh connections. Do not carry out the upgrade when connected via the virtual console offered by the GUI; as this will get interrupted during the upgrade.

Remember to ensure that a valid backup of all VMs and CTs has been created before proceeding.

Continuously use the pve7to8 checklist script

A small checklist program named pve7to8 is included in the latest Proxmox VE 7.4 packages. The program will provide hints and warnings about potential issues before, during and after the upgrade process. You can call it by executing:

 pve7to8

To run it with all checks enabled, execute:

 pve7to8 --full

Make sure to run the full checks at least once before the upgrade.

This script only checks and reports things. By default, no changes to the system are made and thus, none of the issues will be automatically fixed. You should keep in mind that Proxmox VE can be heavily customized, so the script may not recognize all the possible problems with a particular setup!

It is recommended to re-run the script after each attempt to fix an issue. This ensures that the actions taken actually fixed the respective warning.

Move important Virtual Machines and Containers

If any VMs and CTs need to keep running for the duration of the upgrade, migrate them away from the node that is being upgraded.

Migration compatibility rules to keep in mind when planning your cluster upgrade:

• A migration of a VM or CT from an older version of Proxmox VE to a newer version will always work.
• A migration from a newer Proxmox VE version to an older version may work, but is generally not supported.

Update the configured APT repositories

First, make sure that the system is using the latest Proxmox VE 7.4 packages:

apt update
apt dist-upgrade
pveversion

The last command should report at least 7.4-15 or newer.

Update Debian Base Repositories to Bookworm

Update all Debian and Proxmox VE repository entries to Bookworm.

sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list

Ensure that there are no remaining Debian Bullseye specific repositories left, if you can use the # symbol at the start of the respective line to comment these repositories out. Check all files in the /etc/apt/sources.list.d/pve-enterprise.list and /etc/apt/sources.list and see Package_Repositories for the correct Proxmox VE 8 / Debian Bookworm repositories.

Add the Proxmox VE 8 Package Repository

echo "deb https://enterprise.proxmox.com/debian/pve bookworm pve-enterprise" > /etc/apt/sources.list.d/pve-enterprise.list

For the no-subscription repository, see Package Repositories. Rather than commenting out/removing the PVE 7.x repositories, as was previously mentioned, you could also run the following command to update to the Proxmox VE 8 repositories:

sed -i -e 's/bullseye/bookworm/g' /etc/apt/sources.list.d/pve-install-repo.list 

Update the Ceph Package Repository

Note: For hyper-converged ceph setups only, check the ceph panel and configured repositories in the Web UI of this node, if unsure.

Replace any ceph.com repositories with proxmox.com ceph repositories.

NOTE: At this point a hyper-converged Ceph cluster installed directly in Proxmox VE must run Ceph 17.2 Quincy, if not you need to upgrade Ceph first before upgrading to Proxmox VE 8 on Debian 12 Bookworm! You can check the current ceph version in the Ceph panel of each node in the Web UI of Proxmox VE.

With Proxmox VE 8 there also exists an enterprise repository for ceph, providing the best choice for production setups.

echo "deb https://enterprise.proxmox.com/debian/ceph-quincy bookworm enterprise" > /etc/apt/sources.list.d/ceph.list

If updating fails with a 401 error, you might need to refresh the subscription first to ensure new access to ceph is granted, do this via the Web UI or pvesubscription update --force.

If you do not have any subscription you can use the no-subscription repository:

echo "deb http://download.proxmox.com/debian/ceph-quincy bookworm no-subscription" > /etc/apt/sources.list.d/ceph.list

If there is a backports line, remove it - the upgrade has not been tested with packages from the backports repository installed.

Refresh Package Index

Update the repositories' package index:

apt update

Upgrade the system to Debian Bookworm and Proxmox VE 8.0

Note that the time required for finishing this step heavily depends on the system's performance, especially the root filesystem's IOPS and bandwidth. A slow spinner can take up to 60 minutes or more, while for a high-performance server with SSD storage, the dist-upgrade can be finished in under 5 minutes.

Start with this step, to get the initial set of upgraded packages:

apt dist-upgrade

During the above step, you will be asked to approve changes to configuration files, where the default config has been updated by their respective package.

It's suggested to check the difference for each file in question and choose the answer accordingly to what's most appropriate for your setup.

Common configuration files with changes, and the recommended choices are:

• /etc/issue -> Proxmox VE will auto-generate this file on boot, and it has only cosmetic effects on the login console.

  Using the default "No" (keep your currently-installed version) is safe here.

• /etc/lvm/lvm.conf -> Changes relevant for Proxmox VE will be updated, and a newer config version might be useful.

  If you did not make extra changes yourself and are unsure it's suggested to choose "Yes" (install the package maintainer's version) here.

• /etc/ssh/sshd_config -> If you have not changed this file manually, the only differences should be a replacement of ChallengeResponseAuthentication no with KbdInteractiveAuthentication no and some irrelevant changes in comments (lines starting with #).

  If this is the case, both options are safe, though we would recommend installing the package maintainer's version in order to move away from the deprecated ChallengeResponseAuthentication option. If there are other changes, we suggest to inspect them closely and decide accordingly.

• /etc/default/grub -> Here you may want to take special care, as this is normally only asked for if you changed it manually, e.g., for adding some kernel command line option.

  It's recommended to check the difference for any relevant change, note that changes in comments (lines starting with #) are not relevant.

  If unsure, we suggested to selected "No" (keep your currently-installed version)

Check Result & Reboot Into Updated Kernel

If the dist-upgrade command exits successfully, you can re-check the pve7to8 checker script and reboot the system in order to use the new Proxmox VE kernel.

Please note that you should reboot even if you already used the 6.2 kernel previously, through the opt-in package on Proxmox VE 7. This is required to guarantee the best compatibility with the rest of the system, as the updated kernel was (re-)build with the newer Proxmox VE 8 compiler and ABI versions.

After the Proxmox VE upgrade

Empty the browser cache and/or force-reload (CTRL + SHIFT + R, or for MacOS ⌘ + Alt + R) the Web UI.

For Clusters

• Check that all nodes are up and running on the latest package versions.

  If not, continue the upgrade on the next node, start over at #Preconditions

Checklist issues

proxmox-ve package is too old

Check the configured package repository entries; they still need to be for Proxmox VE 7.x and Bullseye at this step (see Package_Repositories). Then run

apt update

followed by

apt dist-upgrade

to get the latest Proxmox VE 7.x packages before upgrading to PVE 8.x

Known Upgrade Issues

General

As a Debian based distribution, Proxmox VE is affected by most issues and changes affecting Debian. Thus, ensure that you read the upgrade specific issues for Debian Bookworm, for example the transition from classic NTP to NTPsec

Please also check the known issue list from the Proxmox VE 8.0 changelog: https://pve.proxmox.com/wiki/Roadmap#8.0-known-issues

Upgrade wants to remove package 'proxmox-ve'

If you have installed Proxmox VE on top of a plain Debian Bullseye (without using the Proxmox VE ISO), you may have installed the package 'linux-image-amd64', which conflicts with current 7.x setups. To solve this, you have to remove this package with

apt remove linux-image-amd64

before the dist-upgrade.

---

Third-party Storage Plugins

If you use any external storage plugin you need to wait until the plugin author adapted it for Proxmox VE 8.0.

---

Older Hardware and New 6.2 Kernel and Other Software

Compatibility of old hardware (released >= 10 years ago) is not as thoroughly tested as more recent hardware. For old hardware we highly recommend testing compatibility of Proxmox VE 8 with identical (or at least similar) hardware before upgrading any production machines.

Ceph has been reported to run into "illegal instruction" errors with at least AMD Opteron 2427 (released in 2009) and AMD Turion II Neo N54L (released in 2010) CPUs.

We will expand this section with potential pitfalls and workarounds once they arise.

---

VM Live-Migration with different host CPUs

Live migration between nodes with different CPU models and especially different vendors can cause problems, such as VMs becoming unresponsive and causing high CPU utilization. The kernel version 5.15 as migration source is particularly prone to such issues because a filter for some vCPU flags is missing. We recommend testing live migration with a non-production VM first when upgrading. For this reason, we highly encourage using homogenous setups in clusters that use live migration.

---

Network

Network Interface Name Change

Due to the new kernel recognizing more features of some hardware, like for example virtual functions, and interface naming often derives from the PCI(e) address, some NICs may change their name, in which case the network configuration needs to be adapted.

In general, it's recommended to either have an independent remote connection to the Proxmox VE's host console, for example, through IPMI or iKVM, or physical access for managing the server even when its own network doesn't come up after a major upgrade or network change.

Network Fails on Boot Due to NTPsec Hook

Some users reported that after the upgrade their network failed to come up cleanly on boot, but worked if triggered manually (e.g., using ifreload -a), when ntpsec was installed.

We're still investigating for a definitive root cause, but it seems that an udev hook which the /etc/network/if-up.d/ntpsec-ntpdate might hang on some hardware, albeit due to changes not directly related to ntpsec.

Since the chrony NTP daemon is used as default for new installations since Proxmox VE 7.0 the simplest solution might be switching to that via apt install chrony.

---

cgroup V1 Deprecation

Reminder, since the previous major release Proxmox VE 7.0, the default is a pure cgroupv2 environment. While Proxmox VE 8 did not change in this regard, we'd like to note that Proxmox VE 8 will be the last release series that supports booting into the old "hybrid" cgroup system, e.g. for compatibility with ancient Container OS.

That means that Containers running systemd version 230 (released in 2016) or older won't be supported at all in the next major release (Proxmox VE 9, ~ 2025 Q2/Q3). If you still run such container (e.g., CentOS 7 or Ubuntu 16.04), please use the Proxmox VE 8 release cycle as time window to migrate to newer, still supported versions of the respective Container OS.

---

NVIDIA vGPU Compatibility

If you are using NVIDIA's GRID/vGPU technology, its driver must be compatible with the kernel you are using. Make sure you use at least GRID version 16.0 (driver version 535.54.06 - current as of July 2023) on the host before upgrading, since older versions (e.g. 15.x) are not compatible with kernel versions >= 6.0 and Proxmox VE 8.0 ships with at least 6.2.

---

Systemd-boot (for ZFS on root and UEFI systems only)

Systems booting via UEFI from a ZFS on root setup should install the systemd-boot package after the upgrade. You will get a Warning from the pve7to8 script after the upgrade if your system is affected - in all other cases you can safely ignore this point.

The systemd-boot was split out from the systemd package for Debian Bookworm based releases. It won't get installed automatically upon upgrade from Proxmox VE 7.4 as it can cause trouble on systems not booting from UEFI with ZFS on root setup by the Proxmox VE installer.

Systems which have ZFS on root and boot in UEFI mode will need to manually install it if they need to initialize a new ESP (see the output of proxmox-boot-tool status and the relevant documentation).

Note that the system remains bootable even without the package installed.

It is not recommended installing systemd-boot on systems which don't need it, as it would replace grub as bootloader in its postinst script.

Troubleshooting

Failing upgrade to "bookworm"

Make sure that the repository configuration for Bookworm is correct.

If there was a network failure and the upgrade was only partially completed, try to repair the situation with

apt -f install

If you see the following message:

W: (pve-apt-hook) You are attempting to remove the meta-package 'proxmox-ve'!

then one or more of the currently existing packages cannot be upgraded since the proper Bookworm repository is not configured.

Check which of the previously used repositories (i.e. for Bullseye) do not exist for Bookworm or have not been upgraded to Bullseye ones.

If a corresponding Bookworm repository exists, upgrade the configuration (see also special remark for Ceph).

If an upgrade is not possible, configure all repositories as they were before the upgrade attempt, then run:

apt update

again. Then remove all packages which are currently installed from that repository. Following this, start the upgrade procedure again.

Unable to boot due to grub failure

See Recover From Grub Failure

If your system was installed on ZFS using legacy BIOS boot before the Proxmox VE 6.4 ISO, incompatibilities between the ZFS implementation in grub and newer ZFS versions can lead to a broken boot. Check the article on switching to proxmox-boot-tool ZFS: Switch Legacy-Boot to Proxmox Boot Tool for more details.

External links

Release Notes for Debian 12.0 (bookworm), 64-bit PC