[PVE-User] Ceph don't WORK (NTP Time ?)

[Alwin Antreich]

Hello XX0001XX,

On 10/12/2016 07:03 PM, XX0001XX YY0001YY wrote:
> Hello, 
> 
> I have 3 nodes and i configure ceph in all node. 
> When i create OSD in GUI, it's work just for one. 
> 
> 
> In PVE1 there is osd.0 
> PVE2 nothing 
> PVE3 nothing 
> 
> There is no error when i create OSD. 
> just : Warning: The kernel is still using the old partition table. 
> The new table will be used at the next reboot. 
> The operation has completed successfully. 
> TASK OK" 
> 
> So i restart node but i have no OSD. 

What does ceph -s say?

> 
> In ceph LOG i have : 
> 
> 2016-10-12 17:52:56.384198 mon.0 10.0.2.2:6789/0 4 : [WRN] mon.2 10.0.2.4:6789/0 clock skew 0.989872s > max 0.05s 
> 2016-10-12 17:52:56.384347 mon.0 10.0.2.2:6789/0 5 : [WRN] mon.1 10.0.2.3:6789/0 clock skew 0.646623s > max 0.05s 
> 2016-10-12 17:52:56.411219 mon.0 10.0.2.2:6789/0 6 : [INF] monmap e3: 3 mons at {0=10.0.2.3:6789/0,1=10.0.2.2:6789/0,2=10.0.2.4:6789/0} 
> 2016-10-12 17:52:56.411296 mon.0 10.0.2.2:6789/0 7 : [INF] pgmap v30: 448 pgs: 448 creating; 0 bytes data, 0 kB used, 0 kB / 0 kB avail 
> 2016-10-12 17:52:56.411351 mon.0 10.0.2.2:6789/0 8 : [INF] mdsmap e1: 0/0/1 up 
> 2016-10-12 17:52:56.411450 mon.0 10.0.2.2:6789/0 9 : [INF] osdmap e29: 5 osds: 0 up, 0 in 
> 2016-10-12 17:54:12.191186 mon.2 10.0.2.4:6789/0 6 : [WRN] message from mon.0 was stamped 0.989324s in the future, clocks not synchronized 
> 2016-10-12 17:55:03.709922 mon.1 10.0.2.3:6789/0 14 : [WRN] message from mon.0 was stamped 0.647074s in the future, clocks not synchronized 
> 2016-10-12 17:57:56.309230 mon.0 10.0.2.2:6789/0 10 : [WRN] mon.2 10.0.2.4:6789/0 clock skew 0.986097s > max 0.05s 
> 2016-10-12 17:57:56.309292 mon.0 10.0.2.2:6789/0 11 : [WRN] mon.1 10.0.2.3:6789/0 clock skew 0.645532s > max 0.05s 
> 2016-10-12 18:02:56.309388 mon.0 10.0.2.2:6789/0 12 : [WRN] mon.2 10.0.2.4:6789/0 clock skew 0.981778s > max 0.05s 
> 2016-10-12 18:02:56.309501 mon.0 10.0.2.2:6789/0 13 : [WRN] mon.1 10.0.2.3:6789/0 clock skew 0.642709s > max 0.05s 
> 
> 
> 
> 
> 
> :/ 
> so i have test systemd-timesyncd in ALL node. 
> https://pve.proxmox.com/wiki/Configuration_of_Time_Syncronization_(NTP) 

What means, you have tested timesyncd? Can you please show the status of timesyncd?

> 
> 
> But i have same error... 
> 
> Please, help me. 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 

-- 
Cheers,
Alwin